[dpdk-dev] [PATCH] net/i40e: add a specific API to control the LLDP agent

Zijie Pan zijie.pan at 6wind.com
Fri May 18 12:14:07 CEST 2018


Add a new API rte_pmd_i40e_set_lldp_cmd to control LLDP agent for i40e.
It supports the following i40e debug lldp commands:
    - start/stop of the LLDP agent.
    - get local/remote of the LLDP MIB (Management Information Base).

Signed-off-by: Laurent Hardy <laurent.hardy at 6wind.com>
Signed-off-by: Zijie Pan <zijie.pan at 6wind.com>
---
 drivers/net/i40e/i40e_ethdev.h            |   19 +++++++++
 drivers/net/i40e/rte_pmd_i40e.c           |   64 +++++++++++++++++++++++++++++
 drivers/net/i40e/rte_pmd_i40e.h           |   22 ++++++++++
 drivers/net/i40e/rte_pmd_i40e_version.map |    8 +++-
 4 files changed, 112 insertions(+), 1 deletion(-)

diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 55c8875..459b3ff 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -267,6 +267,25 @@ enum i40e_flxpld_layer_idx {
 struct i40e_adapter;
 
 /**
+ * LLDP command type
+ */
+enum i40_lldp_cmd_type {
+	I40E_LLDP_CMD_START = 0,
+	I40E_LLDP_CMD_STOP,
+	I40E_LLDP_CMD_GET_LOCAL,
+	I40E_LLDP_CMD_GET_REMOTE,
+	I40E_LLDP_CMD_UNKNOWN,
+};
+
+/**
+ * LLDP command structure
+ */
+struct i40e_lldp_cmd {
+	const char *name;
+	enum i40_lldp_cmd_type cmd;
+};
+
+/**
  * MAC filter structure
  */
 struct i40e_mac_filter_info {
diff --git a/drivers/net/i40e/rte_pmd_i40e.c b/drivers/net/i40e/rte_pmd_i40e.c
index 7aa1a75..307c597 100644
--- a/drivers/net/i40e/rte_pmd_i40e.c
+++ b/drivers/net/i40e/rte_pmd_i40e.c
@@ -12,6 +12,14 @@
 #include "i40e_rxtx.h"
 #include "rte_pmd_i40e.h"
 
+static const struct i40e_lldp_cmd lldp_cmds_table[] = {
+	{"start", I40E_LLDP_CMD_START},
+	{"stop", I40E_LLDP_CMD_STOP},
+	{"get local", I40E_LLDP_CMD_GET_LOCAL},
+	{"get remote", I40E_LLDP_CMD_GET_REMOTE},
+	{"", I40E_LLDP_CMD_UNKNOWN},
+};
+
 int
 rte_pmd_i40e_ping_vfs(uint16_t port, uint16_t vf)
 {
@@ -3192,3 +3200,59 @@ int rte_pmd_i40e_flow_add_del_packet_template(
 	I40E_WRITE_FLUSH(hw);
 	return 0;
 }
+
+int __rte_experimental
+rte_pmd_i40e_set_lldp_cmd(uint16_t port, const char *cmd, void *lldpmib)
+{
+	struct rte_eth_dev *dev;
+	struct i40e_hw *hw;
+	uint8_t br_type;
+	int i, ret;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	dev = &rte_eth_devices[port];
+
+	if (!is_i40e_supported(dev))
+		return -ENOTSUP;
+
+	hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	for (i = 0; i < I40E_LLDP_CMD_UNKNOWN; i++) {
+		if (!strcmp(cmd, lldp_cmds_table[i].name))
+			break;
+	}
+
+	if (lldp_cmds_table[i].cmd == I40E_LLDP_CMD_UNKNOWN) {
+		PMD_DRV_LOG(ERR, "Unknown LLDP command\n");
+		return -EINVAL;
+	}
+
+	switch (lldp_cmds_table[i].cmd) {
+	case I40E_LLDP_CMD_START:
+		ret = i40e_aq_start_lldp(hw, NULL);
+		break;
+	case I40E_LLDP_CMD_STOP:
+		ret = i40e_aq_stop_lldp(hw, true, NULL);
+		break;
+	case I40E_LLDP_CMD_GET_LOCAL:
+		ret = i40e_aq_get_lldp_mib(hw, 0,
+					   I40E_AQ_LLDP_MIB_LOCAL,
+					   lldpmib, I40E_LLDPDU_SIZE,
+					   NULL, NULL, NULL);
+		break;
+	case I40E_LLDP_CMD_GET_REMOTE:
+		br_type = I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE;
+		ret = i40e_aq_get_lldp_mib(hw, br_type,
+					   I40E_AQ_LLDP_MIB_REMOTE,
+					   lldpmib, I40E_LLDPDU_SIZE,
+					   NULL, NULL, NULL);
+		break;
+	default:
+		PMD_DRV_LOG(ERR, "Unknown LLDP command\n");
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
diff --git a/drivers/net/i40e/rte_pmd_i40e.h b/drivers/net/i40e/rte_pmd_i40e.h
index be4a602..59b2eee 100644
--- a/drivers/net/i40e/rte_pmd_i40e.h
+++ b/drivers/net/i40e/rte_pmd_i40e.h
@@ -1061,4 +1061,26 @@ int rte_pmd_i40e_inset_set(uint16_t port, uint8_t pctype,
 	return 0;
 }
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Process the LLDP commands, including "lldp start", "lldp stop",
+ * "lldp get local" and "lldp get remote".
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param cmd
+ *    The LLDP command.
+ * @param lldpmib
+ *    The pointer to return the LLDP MIB.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if *cmd* invalid.
+ *   - (-ENOTSUP) not supported by firmware.
+ */
+int __rte_experimental
+rte_pmd_i40e_set_lldp_cmd(uint16_t port, const char *cmd, void *lldpmib);
+
 #endif /* _PMD_I40E_H_ */
diff --git a/drivers/net/i40e/rte_pmd_i40e_version.map b/drivers/net/i40e/rte_pmd_i40e_version.map
index cccd576..1ffa02a 100644
--- a/drivers/net/i40e/rte_pmd_i40e_version.map
+++ b/drivers/net/i40e/rte_pmd_i40e_version.map
@@ -64,4 +64,10 @@ DPDK_18.02 {
 
 	rte_pmd_i40e_inset_get;
 	rte_pmd_i40e_inset_set;
-} DPDK_17.11;
\ No newline at end of file
+} DPDK_17.11;
+
+EXPERIMENTAL {
+	global:
+
+	rte_pmd_i40e_set_lldp_cmd;
+};
-- 
1.7.10.4



More information about the dev mailing list