[dpdk-dev] [PATCH v11 2/5] eal: add the APIs to wait until equal

[Ananyev, Konstantin]

> The rte_wait_until_equal_xx APIs abstract the functionality of
> 'polling for a memory location to become equal to a given value'.
> 
> Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
> by default. When it is enabled, the above APIs will call WFE instruction
> to save CPU cycles and power.
> 
> From a VM, when calling this API on aarch64, it may trap in and out to
> release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
> adaptive trapping mechanism is introduced to balance the latency and
> workload.
> 
> Signed-off-by: Gavin Hu <gavin.hu at arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang at arm.com>
> Reviewed-by: Steve Capper <steve.capper at arm.com>
> Reviewed-by: Ola Liljedahl <ola.liljedahl at arm.com>
> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli at arm.com>
> Reviewed-by: Phil Yang <phil.yang at arm.com>
> Acked-by: Pavan Nikhilesh <pbhagavatula at marvell.com>
> Acked-by: Jerin Jacob <jerinj at marvell.com>
> ---
>  config/arm/meson.build                             |   1 +
>  config/common_base                                 |   5 +
>  .../common/include/arch/arm/rte_pause_64.h         | 188 +++++++++++++++++++++
>  lib/librte_eal/common/include/generic/rte_pause.h  |  99 +++++++++++
>  4 files changed, 293 insertions(+)
> 
> diff --git a/config/arm/meson.build b/config/arm/meson.build
> index 979018e..b4b4cac 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -26,6 +26,7 @@ flags_common_default = [
>  	['RTE_LIBRTE_AVP_PMD', false],
> 
>  	['RTE_SCHED_VECTOR', false],
> +	['RTE_ARM_USE_WFE', false],
>  ]
> 
>  flags_generic = [
> diff --git a/config/common_base b/config/common_base
> index e843a21..c812156 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -111,6 +111,11 @@ CONFIG_RTE_MAX_VFIO_CONTAINERS=64
>  CONFIG_RTE_MALLOC_DEBUG=n
>  CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
>  CONFIG_RTE_USE_LIBBSD=n
> +# Use WFE instructions to implement the rte_wait_for_equal_xxx APIs,
> +# calling these APIs put the cores in low power state while waiting
> +# for the memory address to become equal to the expected value.
> +# This is supported only by aarch64.
> +CONFIG_RTE_ARM_USE_WFE=n
> 
>  #
>  # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
> diff --git a/lib/librte_eal/common/include/arch/arm/rte_pause_64.h b/lib/librte_eal/common/include/arch/arm/rte_pause_64.h
> index 93895d3..1680d7a 100644
> --- a/lib/librte_eal/common/include/arch/arm/rte_pause_64.h
> +++ b/lib/librte_eal/common/include/arch/arm/rte_pause_64.h
> @@ -1,5 +1,6 @@
>  /* SPDX-License-Identifier: BSD-3-Clause
>   * Copyright(c) 2017 Cavium, Inc
> + * Copyright(c) 2019 Arm Limited
>   */
> 
>  #ifndef _RTE_PAUSE_ARM64_H_
> @@ -10,6 +11,11 @@ extern "C" {
>  #endif
> 
>  #include <rte_common.h>
> +
> +#ifdef RTE_ARM_USE_WFE
> +#define RTE_WAIT_UNTIL_EQUAL_ARCH_DEFINED
> +#endif
> +
>  #include "generic/rte_pause.h"
> 
>  static inline void rte_pause(void)
> @@ -17,6 +23,188 @@ static inline void rte_pause(void)
>  	asm volatile("yield" ::: "memory");
>  }
> 
> +/**
> + * Send an event to quit WFE.
> + */
> +static inline void rte_sevl(void);
> +
> +/**
> + * Put processor into low power WFE(Wait For Event) state
> + */
> +static inline void rte_wfe(void);
> +
> +#ifdef RTE_ARM_USE_WFE
> +static inline void rte_sevl(void)
> +{
> +	asm volatile("sevl" : : : "memory");
> +}
> +
> +static inline void rte_wfe(void)
> +{
> +	asm volatile("wfe" : : : "memory");
> +}
> +#else
> +static inline void rte_sevl(void)
> +{
> +}
> +static inline void rte_wfe(void)
> +{
> +	rte_pause();
> +}
> +#endif
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Atomic exclusive load from addr, it returns the 16-bit content of *addr
> + * while making it 'monitored',when it is written by someone else, the
> + * 'monitored' state is cleared and a event is generated implicitly to exit
> + * WFE.
> + *
> + * @param addr
> + *  A pointer to the memory location.
> + * @param memorder
> + *  The valid memory order variants are __ATOMIC_ACQUIRE and __ATOMIC_RELAXED.
> + *  These map to C++11 memory orders with the same names, see the C++11 standard
> + *  the GCC wiki on atomic synchronization for detailed definitions.
> + */
> +static __rte_always_inline uint16_t
> +rte_atomic_load_ex_16(volatile uint16_t *addr, int memorder);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Atomic exclusive load from addr, it returns the 32-bit content of *addr
> + * while making it 'monitored',when it is written by someone else, the
> + * 'monitored' state is cleared and a event is generated implicitly to exit
> + * WFE.
> + *
> + * @param addr
> + *  A pointer to the memory location.
> + * @param memorder
> + *  The valid memory order variants are __ATOMIC_ACQUIRE and __ATOMIC_RELAXED.
> + *  These map to C++11 memory orders with the same names, see the C++11 standard
> + *  the GCC wiki on atomic synchronization for detailed definitions.
> + */
> +static __rte_always_inline uint32_t
> +rte_atomic_load_ex_32(volatile uint32_t *addr, int memorder);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Atomic exclusive load from addr, it returns the 64-bit content of *addr
> + * while making it 'monitored',when it is written by someone else, the
> + * 'monitored' state is cleared and a event is generated implicitly to exit
> + * WFE.
> + *
> + * @param addr
> + *  A pointer to the memory location.
> + * @param memorder
> + *  The valid memory order variants are __ATOMIC_ACQUIRE and __ATOMIC_RELAXED.
> + *  These map to C++11 memory orders with the same names, see the C++11 standard
> + *  the GCC wiki on atomic synchronization for detailed definitions.
> + */
> +static __rte_always_inline uint64_t
> +rte_atomic_load_ex_64(volatile uint64_t *addr, int memorder);
> +
> +static __rte_always_inline uint16_t
> +rte_atomic_load_ex_16(volatile uint16_t *addr, int memorder)
> +{
> +	uint16_t tmp;
> +	assert((memorder == __ATOMIC_ACQUIRE)
> +			|| (memorder == __ATOMIC_RELAXED));
> +	if (memorder == __ATOMIC_ACQUIRE)
> +		asm volatile("ldaxrh %w[tmp], [%x[addr]]"
> +			: [tmp] "=&r" (tmp)
> +			: [addr] "r"(addr)
> +			: "memory");
> +	else if (memorder == __ATOMIC_RELAXED)
> +		asm volatile("ldxrh %w[tmp], [%x[addr]]"
> +			: [tmp] "=&r" (tmp)
> +			: [addr] "r"(addr)
> +			: "memory");
> +	return tmp;
> +}
> +
> +static __rte_always_inline uint32_t
> +rte_atomic_load_ex_32(volatile uint32_t *addr, int memorder)
> +{
> +	uint32_t tmp;
> +	assert((memorder == __ATOMIC_ACQUIRE)
> +			|| (memorder == __ATOMIC_RELAXED));
> +	if (memorder == __ATOMIC_ACQUIRE)
> +		asm volatile("ldaxr %w[tmp], [%x[addr]]"
> +			: [tmp] "=&r" (tmp)
> +			: [addr] "r"(addr)
> +			: "memory");
> +	else if (memorder == __ATOMIC_RELAXED)
> +		asm volatile("ldxr %w[tmp], [%x[addr]]"
> +			: [tmp] "=&r" (tmp)
> +			: [addr] "r"(addr)
> +			: "memory");
> +	return tmp;
> +}
> +
> +static __rte_always_inline uint64_t
> +rte_atomic_load_ex_64(volatile uint64_t *addr, int memorder)
> +{
> +	uint64_t tmp;
> +	assert((memorder == __ATOMIC_ACQUIRE)
> +			|| (memorder == __ATOMIC_RELAXED));
> +	if (memorder == __ATOMIC_ACQUIRE)
> +		asm volatile("ldaxr %x[tmp], [%x[addr]]"
> +			: [tmp] "=&r" (tmp)
> +			: [addr] "r"(addr)
> +			: "memory");
> +	else if (memorder == __ATOMIC_RELAXED)
> +		asm volatile("ldxr %x[tmp], [%x[addr]]"
> +			: [tmp] "=&r" (tmp)
> +			: [addr] "r"(addr)
> +			: "memory");
> +	return tmp;
> +}
> +
> +#ifdef RTE_WAIT_UNTIL_EQUAL_ARCH_DEFINED
> +static __rte_always_inline void
> +rte_wait_until_equal_16(volatile uint16_t *addr, uint16_t expected,
> +int memorder)
> +{
> +	if (__atomic_load_n(addr, memorder) != expected) {
> +		rte_sevl();
> +		do {
> +			rte_wfe();
> +		} while (rte_atomic_load_ex_16(addr, memorder) != expected);
> +	}
> +}
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_32(volatile uint32_t *addr, uint32_t expected,
> +int memorder)
> +{
> +	if (__atomic_load_n(addr, memorder) != expected) {
> +		rte_sevl();
> +		do {
> +			rte_wfe();
> +		} while (__atomic_load_n(addr, memorder) != expected);

Here and in _64, shouldn't it be:
rte_atomic_load_ex_..
?

> +	}
> +}
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_64(volatile uint64_t *addr, uint64_t expected,
> +int memorder)
> +{
> +	if (__atomic_load_n(addr, memorder) != expected) {
> +		rte_sevl();
> +		do {
> +			rte_wfe();
> +		} while (__atomic_load_n(addr, memorder) != expected);
> +	}
> +}
> +#endif
> +
>  #ifdef __cplusplus
>  }
>  #endif
> diff --git a/lib/librte_eal/common/include/generic/rte_pause.h b/lib/librte_eal/common/include/generic/rte_pause.h
> index 52bd4db..9d42e32 100644
> --- a/lib/librte_eal/common/include/generic/rte_pause.h
> +++ b/lib/librte_eal/common/include/generic/rte_pause.h
> @@ -1,5 +1,6 @@
>  /* SPDX-License-Identifier: BSD-3-Clause
>   * Copyright(c) 2017 Cavium, Inc
> + * Copyright(c) 2019 Arm Limited
>   */
> 
>  #ifndef _RTE_PAUSE_H_
> @@ -12,6 +13,12 @@
>   *
>   */
> 
> +#include <stdint.h>
> +#include <rte_common.h>
> +#include <rte_atomic.h>
> +#include <rte_compat.h>
> +#include <assert.h>
> +
>  /**
>   * Pause CPU execution for a short while
>   *
> @@ -20,4 +27,96 @@
>   */
>  static inline void rte_pause(void);
> 
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Wait for *addr to be updated with a 16-bit expected value, with a relaxed
> + * memory ordering model meaning the loads around this API can be reordered.
> + *
> + * @param addr
> + *  A pointer to the memory location.
> + * @param expected
> + *  A 16-bit expected value to be in the memory location.
> + * @param memorder
> + *  Two different memory orders that can be specified:
> + *  __ATOMIC_ACQUIRE and __ATOMIC_RELAXED. These map to
> + *  C++11 memory orders with the same names, see the C++11 standard or
> + *  the GCC wiki on atomic synchronization for detailed definition.
> + */
> +__rte_experimental
> +static __rte_always_inline void
> +rte_wait_until_equal_16(volatile uint16_t *addr, uint16_t expected,
> +int memorder);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Wait for *addr to be updated with a 32-bit expected value, with a relaxed
> + * memory ordering model meaning the loads around this API can be reordered.
> + *
> + * @param addr
> + *  A pointer to the memory location.
> + * @param expected
> + *  A 32-bit expected value to be in the memory location.
> + * @param memorder
> + *  Two different memory orders that can be specified:
> + *  __ATOMIC_ACQUIRE and __ATOMIC_RELAXED. These map to
> + *  C++11 memory orders with the same names, see the C++11 standard or
> + *  the GCC wiki on atomic synchronization for detailed definition.
> + */
> +__rte_experimental
> +static __rte_always_inline void
> +rte_wait_until_equal_32(volatile uint32_t *addr, uint32_t expected,
> +int memorder);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
> + *
> + * Wait for *addr to be updated with a 64-bit expected value, with a relaxed
> + * memory ordering model meaning the loads around this API can be reordered.
> + *
> + * @param addr
> + *  A pointer to the memory location.
> + * @param expected
> + *  A 64-bit expected value to be in the memory location.
> + * @param memorder
> + *  Two different memory orders that can be specified:
> + *  __ATOMIC_ACQUIRE and __ATOMIC_RELAXED. These map to
> + *  C++11 memory orders with the same names, see the C++11 standard or
> + *  the GCC wiki on atomic synchronization for detailed definition.
> + */
> +__rte_experimental
> +static __rte_always_inline void
> +rte_wait_until_equal_64(volatile uint64_t *addr, uint64_t expected,
> +int memorder);
> +
> +#ifndef RTE_WAIT_UNTIL_EQUAL_ARCH_DEFINED
> +static __rte_always_inline void
> +rte_wait_until_equal_16(volatile uint16_t *addr, uint16_t expected,
> +int memorder)
> +{
> +	while (__atomic_load_n(addr, memorder) != expected)
> +		rte_pause();
> +}
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_32(volatile uint32_t *addr, uint32_t expected,
> +int memorder)
> +{
> +	while (__atomic_load_n(addr, memorder) != expected)
> +		rte_pause();
> +}
> +
> +static __rte_always_inline void
> +rte_wait_until_equal_64(volatile uint64_t *addr, uint64_t expected,
> +int memorder)
> +{
> +	while (__atomic_load_n(addr, memorder) != expected)
> +		rte_pause();
> +}
> +#endif
> +
>  #endif /* _RTE_PAUSE_H_ */
> --
> 2.7.4