[dpdk-dev] [PATCH V1] testpmd: add eeprom/module eeprom display
David Liu
dliu at iol.unh.edu
Fri Aug 28 15:46:40 CEST 2020
z
On Wed, Aug 26, 2020 at 6:46 PM Ferruh Yigit <ferruh.yigit at intel.com> wrote:
> On 8/26/2020 8:00 PM, David Liu wrote:
> > Commands will dump the content of the EEPROM/module EEPROM for the
> > selected port.
> >
> > Signed-off-by: David Liu <dliu at iol.unh.edu>
> > ---
> > app/test-pmd/cmdline.c | 41 +++++++++++++++
> > app/test-pmd/config.c | 112 +++++++++++++++++++++++++++++++++++++++++
> > app/test-pmd/testpmd.h | 2 +
> > 3 files changed, 155 insertions(+)
> >
> > diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> > index a037a55c6..84943a889 100644
> > --- a/app/test-pmd/cmdline.c
> > +++ b/app/test-pmd/cmdline.c
> > @@ -7594,6 +7594,46 @@ cmdline_parse_inst_t cmd_showdevice = {
> > NULL,
> > },
> > };
> > +
> > +/* ** SHOW EEPROM INFO *** */
> > +struct cmd_showeeprom_result {
> > + cmdline_fixed_string_t show;
> > + cmdline_fixed_string_t type;
> > + uint16_t portnum;
> > +};
> > +
> > +static void cmd_showeeprom_parsed(void *parsed_result,
> > + __rte_unused struct cmdline *cl,
> > + __rte_unused void *data)
> > +{
> > + struct cmd_showeeprom_result *res = parsed_result;
> > +
> > + if (!strcmp(res->type, "eeprom"))
> > + port_eeprom_display(res->portnum);
> > + else if (!strcmp(res->type, "module_eeprom"))
> > + port_module_eeprom_display(res->portnum);
> > +}
> > +
> > +cmdline_parse_token_string_t cmd_showeeprom_show =
> > + TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, show,
> "show");
> > +cmdline_parse_token_string_t cmd_showeeprom_type =
> > + TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, type,
> "eeprom#module_eeprom");
> > +cmdline_parse_token_num_t cmd_showeeprom_portnum =
> > + TOKEN_NUM_INITIALIZER(struct cmd_showeeprom_result, portnum,
> UINT16);
> > +
> > +cmdline_parse_inst_t cmd_showeeprom = {
> > + .f = cmd_showeeprom_parsed,
> > + .data = NULL,
> > + .help_str = "show eeprom|module_eeprom <port_id>",
>
> There is more common syntax like:
> "show port X <port_id>|all"
> or
> "show port <port_id> Y"
>
> Keeping command syntax consistent helps using testpmd. What do you think
> selecting one of above two?
>
> Also can you please update 'cmd_help_long_parsed()' (in same file) and
> documentation (testpmd_funcs.rst) for new command.
>
> Sure, I can use that syntax above and update the documentation.
> > + .tokens = {
> > + (void *)&cmd_showeeprom_show,
> > + (void *)&cmd_showeeprom_type,
> > + (void *)&cmd_showeeprom_portnum,
> > + NULL,
> > + },
> > +};
> > +
> > +
> > /* *** SHOW QUEUE INFO *** */
> > struct cmd_showqueue_result {
> > cmdline_fixed_string_t show;
> > @@ -19325,6 +19365,7 @@ cmdline_parse_ctx_t main_ctx[] = {
> > (cmdline_parse_inst_t *)&cmd_load_from_file,
> > (cmdline_parse_inst_t *)&cmd_showport,
> > (cmdline_parse_inst_t *)&cmd_showqueue,
> > + (cmdline_parse_inst_t *)&cmd_showeeprom,
> > (cmdline_parse_inst_t *)&cmd_showportall,
> > (cmdline_parse_inst_t *)&cmd_showdevice,
> > (cmdline_parse_inst_t *)&cmd_showcfg,
> > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> > index 8cf84ccd3..79fd81a65 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -49,6 +49,7 @@
> > #include <rte_pmd_bnxt.h>
> > #endif
> > #include <rte_gro.h>
> > +#include <rte_hexdump.h>
> >
> > #include "testpmd.h"
> >
> > @@ -710,6 +711,117 @@ port_summary_display(portid_t port_id)
> > (unsigned int) link.link_speed);
> > }
> >
> > +void
> > +port_eeprom_display(portid_t port_id)
> > +{
> > + struct rte_dev_eeprom_info einfo;
> > + int ret;
> > +
> > + if (port_id_is_invalid(port_id, ENABLED_WARN)) {
> > + print_valid_ports();
> > + return;
> > + }
> > +
> > + int len_eeprom = rte_eth_dev_get_eeprom_length(port_id);
> > + char buf[len_eeprom];
>
> If 'len_eeprom' can be negative what will be the 'buf' size?
>
> Thank you for the catch. I will include a negative length error checking,
> > +
> > + if (len_eeprom > 0) {
>
> To reduce the code indentation, you can eliminate this if block by
> returning on
> error cases. (like as done in below 'port_module_eeprom_display()')
>
> > + printf("\nPort: %d\nModule EEPROM:\n", port_id);
> > +
> > + einfo.offset = 0;
> > + einfo.length = len_eeprom;
> > + einfo.data = buf;
> > +
> > + ret = rte_eth_dev_get_eeprom(port_id, &einfo);
> > + if (ret != 0) {
> > + switch (ret) {
> > + case -ENODEV:
> > + printf("port index %d invalid\n",
> port_id);
> > + break;
> > + case -ENOTSUP:
> > + printf("operation not supported by
> device\n");
> > + break;
> > + case -EIO:
> > + printf("device Iis removed\n");
>
> there is a typo before 'is' (and in same messages below)
>
> > + break;
> > + default:
> > + printf("Unable to get module EEPROM:
> %d\n", ret);
> > + break;
> > + }
> > + return;
> > + }
> > +
> > + rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
> > + printf("Finish -- Total EEPROM length: %i bytes\n",
> len_eeprom);
> > +
> > + } else if (len_eeprom == 0)
> > + printf("Port %d: Device does not have EEPROM\n",
> port_id);
> > + else if (len_eeprom == -ENOTSUP)
> > + printf("Port %d: Operation not supported\n", port_id);
> > + else
> > + printf("Port %d: Error getting EEPROM\n", port_id);
> > +}
> > +
> > +void
> > +port_module_eeprom_display(portid_t port_id)
> > +{
> > + struct rte_eth_dev_module_info minfo;
> > + struct rte_dev_eeprom_info einfo;
> > + char buf[1024];
>
> Size can exceed the '1024'
>
> > + int ret;
> > +
> > +
> > + if (port_id_is_invalid(port_id, ENABLED_WARN)) {
> > + print_valid_ports();
> > + return;
> > + }
> > +
> > + ret = rte_eth_dev_get_module_info(port_id, &minfo);
> > + if (ret != 0) {
> > + switch (ret) {
> > + case -ENODEV:
> > + printf("port index %d invalid\n", port_id);
> > + break;
> > + case -ENOTSUP:
> > + printf("operation not supported by device\n");
> > + break;
> > + case -EIO:
> > + printf("device Iis removed\n");
> > + break;
> > + default:
> > + printf("Unable to get module info: %d\n", ret);
> > + break;
> > + }
> > + return;
> > + }
> > +
> > + einfo.offset = 0;
> > + einfo.length = minfo.eeprom_len;
> > + einfo.data = buf;
> > +
> > + ret = rte_eth_dev_get_module_eeprom(port_id, &einfo);
> > + if (ret != 0) {
> > + switch (ret) {
> > + case -ENODEV:
> > + printf("port index %d invalid\n", port_id);
> > + break;
> > + case -ENOTSUP:
> > + printf("operation not supported by device\n");
> > + break;
> > + case -EIO:
> > + printf("device Iis removed\n");
> > + break;
> > + default:
> > + printf("Unable to get module EEPROM: %d\n", ret);
> > + break;
> > + }
> > + return;
> > + }
> > +
> > + printf("\nPort: %d\nEEPROM:\n", port_id);
> > + rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
> > +}
> > +
> > void
> > port_offload_cap_display(portid_t port_id)
> > {
> > diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> > index 7a7c73f79..e3a0d17e5 100644
> > --- a/app/test-pmd/testpmd.h
> > +++ b/app/test-pmd/testpmd.h
> > @@ -714,6 +714,8 @@ void nic_stats_mapping_display(portid_t port_id);
> > void device_infos_display(const char *identifier);
> > void port_infos_display(portid_t port_id);
> > void port_summary_display(portid_t port_id);
> > +void port_eeprom_display(portid_t port_id);
> > +void port_module_eeprom_display(portid_t port_id);
> > void port_summary_header_display(void);
> > void port_offload_cap_display(portid_t port_id);
> > void rx_queue_infos_display(portid_t port_idi, uint16_t queue_id);
> >
>
>
More information about the dev
mailing list