[dpdk-dev] [PATCH] doc: add tested platforms with Mellanox NICs

[Thomas Monjalon]

29/07/2020 14:22, Raslan Darawsheh:
[...]
> +    * Mellanox\ |reg| ConnectX\ |reg|-6 Dx EN 100G MCX623106AN-CDAT (2x100G)
> +
> +      * Host interface: PCI Express 4.0 x16
> +      * Device ID: 15b3:101d
> +      * Firmware version: 22.28.1002 and above
> +
> +* Mellanox(R) BlueField SmartNIC
> +
> +   * Mellanox(R) BlueField SmartNIC MT41686 - MBF2H332A-AEEOT (2x25G)

Instead of (R), |reg| must be used.

> +
> +       * Host interface: PCI Express 3.0 x16
> +       * Device ID: 15b3:a2d2
> +       * Firmware version: 24.28.1002
> +
> +   * SoC ARM cores running OS:
> +
> +     * CentOS Linux release 7.6.1810 (AltArch)
> +     * MLNX_OFED 5.1-0.6.2
> +
> +  * DPDK application running on ARM cores inside SmartNIC

Indent spacing is not consistent in above lines.

Applied with minor changes.