[dpdk-dev] [PATCH V2] testpmd: add eeprom/module eeprom display
David Liu
dliu at iol.unh.edu
Thu Sep 10 21:25:11 CEST 2020
Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the EEPROM/module
EEPROM for the selected port.
Signed-off-by: David Liu <dliu at iol.unh.edu>
---
app/test-pmd/cmdline.c | 49 ++++++++
app/test-pmd/config.c | 118 ++++++++++++++++++++
app/test-pmd/testpmd.h | 2 +
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 7 ++
4 files changed, 177 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a037a55c6..ba240c410 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -166,6 +166,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"show port
(info|stats|summary|xstats|fdir|stat_qmap|dcb_tc|cap) (port_id|all)\n"
" Display information for port_id, or all.\n\n"
+ "show port port_id (module_eeprom|eeprom)\n"
+ " Display the module EEPROM or EEPROM
information for port_id.\n\n"
+
"show port X rss reta (size) (mask0,mask1,...)\n"
" Display the rss redirection table entry
indicated"
" by masks on port X. size is used to indicate the"
@@ -7594,6 +7597,51 @@ cmdline_parse_inst_t cmd_showdevice = {
NULL,
},
};
+
+/* *** SHOW MODULE EEPROM/EEPROM port INFO *** */
+struct cmd_showeeprom_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t port;
+ uint16_t portnum;
+ cmdline_fixed_string_t type;
+};
+
+static void cmd_showeeprom_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_showeeprom_result *res = parsed_result;
+
+ if (!strcmp(res->type, "eeprom"))
+ port_eeprom_display(res->portnum);
+ else if (!strcmp(res->type, "module_eeprom"))
+ port_module_eeprom_display(res->portnum);
+ else
+ printf("Unknown argument\n");
+}
+
+cmdline_parse_token_string_t cmd_showeeprom_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, show,
"show");
+cmdline_parse_token_string_t cmd_showeeprom_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, port,
"port");
+cmdline_parse_token_num_t cmd_showeeprom_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_showeeprom_result, portnum,
UINT16);
+cmdline_parse_token_string_t cmd_showeeprom_type =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, type,
"module_eeprom#eeprom");
+
+cmdline_parse_inst_t cmd_showeeprom = {
+ .f = cmd_showeeprom_parsed,
+ .data = NULL,
+ .help_str = "show port <port_id> module_eeprom|eeprom",
+ .tokens = {
+ (void *)&cmd_showeeprom_show,
+ (void *)&cmd_showeeprom_port,
+ (void *)&cmd_showeeprom_portnum,
+ (void *)&cmd_showeeprom_type,
+ NULL,
+ },
+};
+
/* *** SHOW QUEUE INFO *** */
struct cmd_showqueue_result {
cmdline_fixed_string_t show;
@@ -19325,6 +19373,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_load_from_file,
(cmdline_parse_inst_t *)&cmd_showport,
(cmdline_parse_inst_t *)&cmd_showqueue,
+ (cmdline_parse_inst_t *)&cmd_showeeprom,
(cmdline_parse_inst_t *)&cmd_showportall,
(cmdline_parse_inst_t *)&cmd_showdevice,
(cmdline_parse_inst_t *)&cmd_showcfg,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 8cf84ccd3..5e3e9e211 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -49,6 +49,9 @@
#include <rte_pmd_bnxt.h>
#endif
#include <rte_gro.h>
+#include <rte_hexdump.h>
+
#include "testpmd.h"
@@ -710,6 +713,122 @@ port_summary_display(portid_t port_id)
(unsigned int) link.link_speed);
}
+void
+port_eeprom_display(portid_t port_id)
+{
+ struct rte_dev_eeprom_info einfo;
+ int ret;
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ print_valid_ports();
+ return;
+ }
+
+ int len_eeprom = rte_eth_dev_get_eeprom_length(port_id);
+ if(len_eeprom < 0) {
+ switch (len_eeprom) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device is removed\n");
+ break;
+ default:
+ printf("Unable to get EEPROM: %d\n", len_eeprom);
+ break;
+ }
+ return;
+ }
+
+ char buf[len_eeprom];
+ einfo.offset = 0;
+ einfo.length = len_eeprom;
+ einfo.data = buf;
+
+ ret = rte_eth_dev_get_eeprom(port_id, &einfo);
+ if (ret != 0) {
+ switch (ret) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device is removed\n");
+ break;
+ default:
+ printf("Unable to get EEPROM: %d\n", ret);
+ break;
+ }
+ return;
+ }
+ rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+ printf("Finish -- Port: %d EEPROM length: %d bytes\n", port_id,
len_eeprom);
+}
+
+void
+port_module_eeprom_display(portid_t port_id)
+{
+ struct rte_eth_dev_module_info minfo;
+ struct rte_dev_eeprom_info einfo;
+ int ret;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ print_valid_ports();
+ return;
+ }
+
+
+ ret = rte_eth_dev_get_module_info(port_id, &minfo);
+ if (ret != 0) {
+ switch (ret) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device is removed\n");
+ break;
+ default:
+ printf("Unable to get module EEPROM: %d\n", ret);
+ break;
+ }
+ return;
+ }
+
+ char buf[minfo.eeprom_len];
+ einfo.offset = 0;
+ einfo.length = minfo.eeprom_len;
+ einfo.data = buf;
+
+ ret = rte_eth_dev_get_module_eeprom(port_id, &einfo);
+ if (ret != 0) {
+ switch (ret) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device is removed\n");
+ break;
+ default:
+ printf("Unable to get module EEPROM: %d\n", ret);
+ break;
+ }
+ return;
+ }
+
+ rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+ printf("Finish -- Port: %d MODULE EEPROM length: %d bytes\n",
port_id, einfo.length);
+}
+
void
port_offload_cap_display(portid_t port_id)
{
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 7a7c73f79..e3a0d17e5 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -714,6 +714,8 @@ void nic_stats_mapping_display(portid_t port_id);
void device_infos_display(const char *identifier);
void port_infos_display(portid_t port_id);
void port_summary_display(portid_t port_id);
+void port_eeprom_display(portid_t port_id);
+void port_module_eeprom_display(portid_t port_id);
void port_summary_header_display(void);
void port_offload_cap_display(portid_t port_id);
void rx_queue_infos_display(portid_t port_idi, uint16_t queue_id);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 5103ff925..6a2e1c0f2 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -218,6 +218,13 @@ For example:
nvgre
vxlan-gpe
+show port (module_eeprom|eeprom)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Display the module EEPROM/EEPROM informatioon for port_id::
+
+ testpmd> show port (port_id) (module_eeprom|eeprom)
+
show port rss reta
~~~~~~~~~~~~~~~~~~
--
2.17.1
On Thu, Sep 10, 2020 at 2:48 PM David Liu <dliu at iol.unh.edu> wrote:
>
> On Thu, Sep 10, 2020 at 7:47 AM Ferruh Yigit <ferruh.yigit at intel.com>
> wrote:
>
>> On 9/10/2020 7:00 AM, David Liu wrote:
>> > Add module EEPROM/EEPROM dump command
>> > "show port <port_id> (module_eeprom|eeprom)"
>> > Commands will dump the content of the
>> > EEPROM/module EEPROM for the selected port.
>>
>>
>> Hi David,
>>
>> When sending a new version, can you please increase the verstion tag in
>> the
>> title, V1 -> V2 -> ... -> vN
>>
>> Also sending new patch as reply to previos one keep all versions in same
>> email
>> thread and helps reviewers also people who later checks from archives for
>> a feature.
>>
>> For both above you can find more details in the contribution guide,
>> please check
>> https://doc.dpdk.org/guides/contributing/patches.html#sending-patches
>>
>>
>> And there are a few errors below that this patch shouldn't be compiling
>> successfully, you can verify the build error from lab reports :)
>>
>
> Thank you so much, I will change to that format.
>
>
>> <...>
>>
>> > /* *** SHOW QUEUE INFO *** */
>> > struct cmd_showqueue_result {
>> > cmdline_fixed_string_t show;
>> > @@ -19325,6 +19373,8 @@ cmdline_parse_ctx_t main_ctx[] = {
>> > (cmdline_parse_inst_t *)&cmd_load_from_file,
>> > (cmdline_parse_inst_t *)&cmd_showport,
>> > (cmdline_parse_inst_t *)&cmd_showqueue,
>> > + (cmdline_parse_inst_t *)&cmd_showeeprom,
>> > + (cmdline_parse_inst_t *)&cmd_showmoduleeeprom,
>>
>> This shouldn't compile because 'cmd_showmoduleeeprom' no more exists ...
>>
>> <...>
>>
>> > +
>> > +void
>> > +port_module_eeprom_displao(portid_t port_id)
>> > +{
>>
>> There is a typo in the function name.
>>
>> > + struct rte_eth_dev_module_info minfo;
>> > + struct rte_dev_eeprom_info einfo;
>> > + int ret;
>> > +
>> > + if (port_id_is_invalid(port_id, ENABLED_WARN)) {
>> > + print_valid_ports();
>> > + return;
>> > + }
>> > +
>> > +
>> > + ret = rte_eth_dev_get_module_info(port_id, &minfo);
>> > + if (ret != 0) {
>> > + switch (ret) {
>> > + case -ENODEV:
>> > + printf("port index %d invalid\n", port_id);
>> > + break;
>> > + case -ENOTSUP:
>> > + printf("operation not supported by device\n");
>> > + break;
>> > + case -EIO:
>> > + printf("device is removed\n");
>> > + break;
>> > + default:
>> > + printf("Unable to get module EEPROM: %d\n",
>> len_eeprom);
>>
>> I guess this is copy/paste error 'len_eeprom' is not defined in this
>> function.
>> There is one more occurance below.
>>
>>
> I will send out a new patch with all the fixes and that can be compiled
> hopefully.
>
> <...>
>>
>
More information about the dev
mailing list