[dpdk-dev] [PATCH V14 1/3] ethdev: introduce FEC API
Min Hu (Connor)
humin29 at huawei.com
Tue Sep 29 04:09:48 CEST 2020
Hi, Andrew, ALL,
I have fixed it in V15. please check it out.
By the way, I wish this patch will be merged into 20.11.
Because if missed ,one more year will be waited.
Please check it,thanks.
在 2020/9/28 20:48, Andrew Rybchenko 写道:
> On 9/28/20 2:08 PM, Min Hu (Connor) wrote:
>> This patch adds Forward error correction(FEC) support for ethdev.
>> Introduce APIs which support query and config FEC information in
>> hardware.
>>
>> Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
>> Reviewed-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
>> Reviewed-by: Chengwen Feng <fengchengwen at huawei.com>
>> Reviewed-by: Chengchang Tang <tangchengchang at huawei.com>
>> Acked-by: Andrew Rybchenko <arybchenko at solarflare.com>
>
> [snip]
>
>> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
>> index dfe5c1b..996d230 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -3679,6 +3679,50 @@ rte_eth_led_off(uint16_t port_id)
>> return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
>> }
>>
>> +int
>> +rte_eth_fec_get_capability(uint16_t port_id,
>> + struct rte_eth_fec_capa *speed_fec_capa,
>> + unsigned int num)
>> +{
>> + struct rte_eth_dev *dev;
>> + int ret;
>> +
>> + if (speed_fec_capa == NULL && num > 0)
>> + return -EINVAL;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
>> + ret = (*dev->dev_ops->fec_get_capability)(dev, speed_fec_capa, num);
>> +
>> + return ret;
>> +}
>> +
>> +int
>> +rte_eth_fec_get(uint16_t port_id, uint32_t *fec_capa)
>> +{
>> + struct rte_eth_dev *dev;
>> +
>> + if (fec_capa == NULL)
>> + return -EINVAL;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, fec_capa));
>> +}
>> +
>> +int
>> +rte_eth_fec_set(uint16_t port_id, uint32_t mode)
>
> mode -> fec_capa, since it is not a single mode
>
>> +{
>> + struct rte_eth_dev *dev;
>> +
>> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> + dev = &rte_eth_devices[port_id];
>> + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
>> + return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, mode));
>> +}
>> +
>> /*
>> * Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
>> * an empty spot.
>> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
>> index 645a186..50c5280 100644
>> --- a/lib/librte_ethdev/rte_ethdev.h
>> +++ b/lib/librte_ethdev/rte_ethdev.h
>
> [snip]
>
>> @@ -3397,6 +3420,85 @@ int rte_eth_led_on(uint16_t port_id);
>> int rte_eth_led_off(uint16_t port_id);
>>
>> /**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Get Forward Error Correction(FEC) capability.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param speed_fec_capa
>> + * speed_fec_capa is out only with per-speed capabilities.
>> + * If set to NULL, the function returns the required number
>> + * of required array entries.
>> + * @param num
>> + * a number of elements in an speed_fec_capa array.
>> + *
>> + * @return
>> + * - A positive value lower or equal to num: success. The return value
>
> positive -> non-negative
> since 0 is OK if FEC is not applicable/supported
>
>> + * is the number of entries filled in the fec capa array.
>> + * - A positive value higher than num: error, the given fec capa array
>
> same, positive -> non-negative
>
>> + * is too small. The return value corresponds to the num that should
>> + * be given to succeed. The entries in fec capa array are not valid and
>> + * shall not be used by the caller.
>
> OK for me, possible option is to fill in just provided entries
> (up to num)
>
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * that operation.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + * - (-EINVAL) if *num* or *speed_fec_capa* invalid
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_get_capability(uint16_t port_id,
>> + struct rte_eth_fec_capa *speed_fec_capa,
>> + unsigned int num);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Get current Forward Error Correction(FEC) mode.
>> + * If link is down and AUTO is enabled, AUTO is returned, otherwise,
>> + * configured FEC mode is returned.
>> + * If link is up, current FEC mode is returned.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param fec_capa
>> + * A bitmask of enabled FEC modes. If AUTO bit is set, other
>> + * bits specify FEC modes which may be negotiated. If AUTO
>> + * bit is clear, specify FEC modes to be used (only one valid
>> + * mode per speed may be set).
>> + * @return
>> + * - (0) if successful.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * that operation.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_get(uint16_t port_id, uint32_t *fec_capa);
>> +
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
>> + *
>> + * Set Forward Error Correction(FEC) mode.
>> + *
>> + * @param port_id
>> + * The port identifier of the Ethernet device.
>> + * @param mode
>> + * The FEC mode.
>
> mode -> fec_capa
> with description from callback below
>
>> + * @return
>> + * - (0) if successful.
>> + * - (-EINVAL) if the FEC mode is not valid.
>> + * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
>> + * - (-EIO) if device is removed.
>> + * - (-ENODEV) if *port_id* invalid.
>> + */
>> +__rte_experimental
>> +int rte_eth_fec_set(uint16_t port_id, uint32_t mode);
>> +
>> +/**
>> * Get current status of the Ethernet link flow control for Ethernet device
>> *
>> * @param port_id
>> diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
>> index 23cc1e0..a1f10d6 100644
>> --- a/lib/librte_ethdev/rte_ethdev_driver.h
>> +++ b/lib/librte_ethdev/rte_ethdev_driver.h
>> @@ -575,6 +575,87 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
>> const struct rte_eth_hairpin_conf *hairpin_conf);
>>
>> /**
>> + * @internal
>> + * Get Forward Error Correction(FEC) capability.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param speed_fec_capa
>> + * speed_fec_capa is out only with per-speed capabilities.
>> + * @param num
>> + * a number of elements in an speed_fec_capa array.
>> + *
>> + * @return
>> + * Negative errno value on error, positive value on success.
>> + *
>> + * @retval positive value
>> + * A positive value lower or equal to num: success. The return value
>
> same as above
>
>> + * is the number of entries filled in the fec capa array.
>> + * A positive value higher than num: error, the given fec capa array
>
> same as above
>
>> + * is too small. The return value corresponds to the num that should
>> + * be given to succeed. The entries in the fec capa array are not valid
>> + * and shall not be used by the caller.
>> + * @retval -ENOTSUP
>> + * Operation is not supported.
>> + * @retval -EIO
>> + * Device is removed.
>> + * @retval -EINVAL
>> + * *num* or *speed_fec_capa* invalid.
>> + */
>> +typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
>> + struct rte_eth_fec_capa *speed_fec_capa, unsigned int num);
>> +
>> +/**
>> + * @internal
>> + * Get Forward Error Correction(FEC) mode.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param fec_capa
>> + * a bitmask of enabled FEC modes. If AUTO bit is set, other
>> + * bits specify FEC modes which may be negotiated. If AUTO
>> + * bit is clear, specify FEC modes to be used (only one valid
>> + * mode per speed may be set).
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, get FEC success.
>> + * @retval -ENOTSUP
>> + * Operation is not supported.
>> + * @retval -EIO
>> + * Device is removed.
>> + */
>> +typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
>> + uint32_t *fec_capa);
>> +
>> +/**
>> + * @internal
>> + * Set Forward Error Correction(FEC) mode.
>> + *
>> + * @param dev
>> + * ethdev handle of port.
>> + * @param mode
>
> mode -> fec_capa
>
>> + * bitmask of allowed FEC modes. It must be only one
>> + * if AUTO is disabled. If AUTO is enabled, other
>> + * bits specify FEC modes which may be negotiated.
>> + *
>> + * @return
>> + * Negative errno value on error, 0 on success.
>> + *
>> + * @retval 0
>> + * Success, set FEC success.
>> + * @retval -ENOTSUP
>> + * Operation is not supported.
>> + * @retval -EINVAL
>> + * Unsupported FEC mode requested.
>> + * @retval -EIO
>> + * Device is removed.
>> + */
>> +typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev, uint32_t mode);
>> +
>> +/**
>> * @internal A structure containing the functions exported by an Ethernet driver.
>> */
>> struct eth_dev_ops {
>> @@ -713,6 +794,13 @@ struct eth_dev_ops {
>> /**< Set up device RX hairpin queue. */
>> eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
>> /**< Set up device TX hairpin queue. */
>> +
>> + eth_fec_get_capability_t fec_get_capability;
>> + /**< Get Forward Error Correction(FEC) capability. */
>> + eth_fec_get_t fec_get;
>> + /**< Get Forward Error Correction(FEC) mode. */
>> + eth_fec_set_t fec_set;
>> + /**< Set Forward Error Correction(FEC) mode. */
>> };
>>
>> /**
>> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
>> index c95ef51..b9ace3a 100644
>> --- a/lib/librte_ethdev/rte_ethdev_version.map
>> +++ b/lib/librte_ethdev/rte_ethdev_version.map
>> @@ -229,6 +229,9 @@ EXPERIMENTAL {
>> # added in 20.11
>> rte_eth_link_speed_to_str;
>> rte_eth_link_to_str;
>> + rte_eth_fec_get_capability;
>> + rte_eth_fec_get;
>> + rte_eth_fec_set;
>> };
>>
>> INTERNAL {
>>
>
> .
>
More information about the dev
mailing list