[dpdk-dev] [PATCH v9 03/10] baseband/acc100: add info get function

[Tom Rix]

On 9/28/20 5:29 PM, Nicolas Chautru wrote:
> Add in the "info_get" function to the driver, to allow us to query the
> device.
> No processing capability are available yet.
> Linking bbdev-test to support the PMD with null capability.
>
> Signed-off-by: Nicolas Chautru <nicolas.chautru at intel.com>
> Acked-by: Liu Tianjiao <Tianjiao.liu at intel.com>
> ---
>  app/test-bbdev/meson.build               |   3 +
>  drivers/baseband/acc100/rte_acc100_cfg.h |  96 +++++++++++++
>  drivers/baseband/acc100/rte_acc100_pmd.c | 225 +++++++++++++++++++++++++++++++
>  drivers/baseband/acc100/rte_acc100_pmd.h |   3 +
>  4 files changed, 327 insertions(+)
>  create mode 100644 drivers/baseband/acc100/rte_acc100_cfg.h
>
> diff --git a/app/test-bbdev/meson.build b/app/test-bbdev/meson.build
> index 18ab6a8..fbd8ae3 100644
> --- a/app/test-bbdev/meson.build
> +++ b/app/test-bbdev/meson.build
> @@ -12,3 +12,6 @@ endif
>  if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC')
>  	deps += ['pmd_bbdev_fpga_5gnr_fec']
>  endif
> +if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_ACC100')
> +	deps += ['pmd_bbdev_acc100']
> +endif
> \ No newline at end of file
> diff --git a/drivers/baseband/acc100/rte_acc100_cfg.h b/drivers/baseband/acc100/rte_acc100_cfg.h
> new file mode 100644
> index 0000000..73bbe36
> --- /dev/null
> +++ b/drivers/baseband/acc100/rte_acc100_cfg.h
> @@ -0,0 +1,96 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2020 Intel Corporation
> + */
> +
> +#ifndef _RTE_ACC100_CFG_H_
> +#define _RTE_ACC100_CFG_H_
> +
> +/**
> + * @file rte_acc100_cfg.h
> + *
> + * Functions for configuring ACC100 HW, exposed directly to applications.
> + * Configuration related to encoding/decoding is done through the
> + * librte_bbdev library.
> + *
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
When will this experimental tag be removed ?
> + */
> +
> +#include <stdint.h>
> +#include <stdbool.h>
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +/**< Number of Virtual Functions ACC100 supports */
> +#define RTE_ACC100_NUM_VFS 16
This is already defined with ACC100_NUM_VFS
> +
> +/**
> + * Definition of Queue Topology for ACC100 Configuration
> + * Some level of details is abstracted out to expose a clean interface
> + * given that comprehensive flexibility is not required
> + */
> +struct rte_q_topology_t {
> +	/** Number of QGroups in incremental order of priority */
> +	uint16_t num_qgroups;
> +	/**
> +	 * All QGroups have the same number of AQs here.
> +	 * Note : Could be made a 16-array if more flexibility is really
> +	 * required
> +	 */
> +	uint16_t num_aqs_per_groups;
> +	/**
> +	 * Depth of the AQs is the same of all QGroups here. Log2 Enum : 2^N
> +	 * Note : Could be made a 16-array if more flexibility is really
> +	 * required
> +	 */
> +	uint16_t aq_depth_log2;
> +	/**
> +	 * Index of the first Queue Group Index - assuming contiguity
> +	 * Initialized as -1
> +	 */
> +	int8_t first_qgroup_index;
> +};
> +
> +/**
> + * Definition of Arbitration related parameters for ACC100 Configuration
> + */
> +struct rte_arbitration_t {
> +	/** Default Weight for VF Fairness Arbitration */
> +	uint16_t round_robin_weight;
> +	uint32_t gbr_threshold1; /**< Guaranteed Bitrate Threshold 1 */
> +	uint32_t gbr_threshold2; /**< Guaranteed Bitrate Threshold 2 */
> +};
> +
> +/**
> + * Structure to pass ACC100 configuration.
> + * Note: all VF Bundles will have the same configuration.
> + */
> +struct acc100_conf {
> +	bool pf_mode_en; /**< 1 if PF is used for dataplane, 0 for VFs */
> +	/** 1 if input '1' bit is represented by a positive LLR value, 0 if '1'
> +	 * bit is represented by a negative value.
> +	 */
> +	bool input_pos_llr_1_bit;
> +	/** 1 if output '1' bit is represented by a positive value, 0 if '1'
> +	 * bit is represented by a negative value.
> +	 */
> +	bool output_pos_llr_1_bit;
> +	uint16_t num_vf_bundles; /**< Number of VF bundles to setup */
> +	/** Queue topology for each operation type */
> +	struct rte_q_topology_t q_ul_4g;
> +	struct rte_q_topology_t q_dl_4g;
> +	struct rte_q_topology_t q_ul_5g;
> +	struct rte_q_topology_t q_dl_5g;
> +	/** Arbitration configuration for each operation type */
> +	struct rte_arbitration_t arb_ul_4g[RTE_ACC100_NUM_VFS];
> +	struct rte_arbitration_t arb_dl_4g[RTE_ACC100_NUM_VFS];
> +	struct rte_arbitration_t arb_ul_5g[RTE_ACC100_NUM_VFS];
> +	struct rte_arbitration_t arb_dl_5g[RTE_ACC100_NUM_VFS];
> +};
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTE_ACC100_CFG_H_ */
> diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
> index 1b4cd13..7807a30 100644
> --- a/drivers/baseband/acc100/rte_acc100_pmd.c
> +++ b/drivers/baseband/acc100/rte_acc100_pmd.c
> @@ -26,6 +26,184 @@
>  RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, NOTICE);
>  #endif
>  
> +/* Read a register of a ACC100 device */
> +static inline uint32_t
> +acc100_reg_read(struct acc100_device *d, uint32_t offset)
> +{
> +
> +	void *reg_addr = RTE_PTR_ADD(d->mmio_base, offset);
> +	uint32_t ret = *((volatile uint32_t *)(reg_addr));
> +	return rte_le_to_cpu_32(ret);
> +}
> +
> +/* Calculate the offset of the enqueue register */
> +static inline uint32_t
> +queue_offset(bool pf_device, uint8_t vf_id, uint8_t qgrp_id, uint16_t aq_id)
> +{
> +	if (pf_device)
> +		return ((vf_id << 12) + (qgrp_id << 7) + (aq_id << 3) +
> +				HWPfQmgrIngressAq);
> +	else
> +		return ((qgrp_id << 7) + (aq_id << 3) +
> +				HWVfQmgrIngressAq);
Could you add *QmrIngressAq to the acc100_registry_addr and skip the if (pf_device) check ?
> +}
> +
> +enum {UL_4G = 0, UL_5G, DL_4G, DL_5G, NUM_ACC};
> +
> +/* Return the queue topology for a Queue Group Index */
> +static inline void
> +qtopFromAcc(struct rte_q_topology_t **qtop, int acc_enum,
> +		struct acc100_conf *acc100_conf)
> +{
> +	struct rte_q_topology_t *p_qtop;
> +	p_qtop = NULL;
> +	switch (acc_enum) {
> +	case UL_4G:
> +		p_qtop = &(acc100_conf->q_ul_4g);
> +		break;
> +	case UL_5G:
> +		p_qtop = &(acc100_conf->q_ul_5g);
> +		break;
> +	case DL_4G:
> +		p_qtop = &(acc100_conf->q_dl_4g);
> +		break;
> +	case DL_5G:
> +		p_qtop = &(acc100_conf->q_dl_5g);
> +		break;
> +	default:
> +		/* NOTREACHED */
> +		rte_bbdev_log(ERR, "Unexpected error evaluating qtopFromAcc");
Use in fetch_acc100_config does not check for NULL.
> +		break;
> +	}
> +	*qtop = p_qtop;
> +}
> +
> +static void
> +initQTop(struct acc100_conf *acc100_conf)
> +{
> +	acc100_conf->q_ul_4g.num_aqs_per_groups = 0;
> +	acc100_conf->q_ul_4g.num_qgroups = 0;
> +	acc100_conf->q_ul_4g.first_qgroup_index = -1;
> +	acc100_conf->q_ul_5g.num_aqs_per_groups = 0;
> +	acc100_conf->q_ul_5g.num_qgroups = 0;
> +	acc100_conf->q_ul_5g.first_qgroup_index = -1;
> +	acc100_conf->q_dl_4g.num_aqs_per_groups = 0;
> +	acc100_conf->q_dl_4g.num_qgroups = 0;
> +	acc100_conf->q_dl_4g.first_qgroup_index = -1;
> +	acc100_conf->q_dl_5g.num_aqs_per_groups = 0;
> +	acc100_conf->q_dl_5g.num_qgroups = 0;
> +	acc100_conf->q_dl_5g.first_qgroup_index = -1;
> +}
> +
> +static inline void
> +updateQtop(uint8_t acc, uint8_t qg, struct acc100_conf *acc100_conf,
> +		struct acc100_device *d) {
> +	uint32_t reg;
> +	struct rte_q_topology_t *q_top = NULL;
> +	qtopFromAcc(&q_top, acc, acc100_conf);
> +	if (unlikely(q_top == NULL))
> +		return;
as above, this error is not handled by caller fetch_acc100_config
> +	uint16_t aq;
> +	q_top->num_qgroups++;
> +	if (q_top->first_qgroup_index == -1) {
> +		q_top->first_qgroup_index = qg;
> +		/* Can be optimized to assume all are enabled by default */
> +		reg = acc100_reg_read(d, queue_offset(d->pf_device,
> +				0, qg, ACC100_NUM_AQS - 1));
> +		if (reg & QUEUE_ENABLE) {
> +			q_top->num_aqs_per_groups = ACC100_NUM_AQS;
> +			return;
> +		}
> +		q_top->num_aqs_per_groups = 0;
> +		for (aq = 0; aq < ACC100_NUM_AQS; aq++) {
> +			reg = acc100_reg_read(d, queue_offset(d->pf_device,
> +					0, qg, aq));
> +			if (reg & QUEUE_ENABLE)
> +				q_top->num_aqs_per_groups++;
> +		}
> +	}
> +}
> +
> +/* Fetch configuration enabled for the PF/VF using MMIO Read (slow) */
> +static inline void
> +fetch_acc100_config(struct rte_bbdev *dev)
> +{
> +	struct acc100_device *d = dev->data->dev_private;
> +	struct acc100_conf *acc100_conf = &d->acc100_conf;
> +	const struct acc100_registry_addr *reg_addr;
> +	uint8_t acc, qg;
> +	uint32_t reg, reg_aq, reg_len0, reg_len1;
> +	uint32_t reg_mode;
> +
> +	/* No need to retrieve the configuration is already done */
> +	if (d->configured)
> +		return;
Warn ?
> +
> +	/* Choose correct registry addresses for the device type */
> +	if (d->pf_device)
> +		reg_addr = &pf_reg_addr;
> +	else
> +		reg_addr = &vf_reg_addr;
> +
> +	d->ddr_size = (1 + acc100_reg_read(d, reg_addr->ddr_range)) << 10;
> +
> +	/* Single VF Bundle by VF */
> +	acc100_conf->num_vf_bundles = 1;
> +	initQTop(acc100_conf);
> +
> +	struct rte_q_topology_t *q_top = NULL;
> +	int qman_func_id[5] = {0, 2, 1, 3, 4};
Do these magic numbers need #defines ?
> +	reg = acc100_reg_read(d, reg_addr->qman_group_func);
> +	for (qg = 0; qg < ACC100_NUM_QGRPS_PER_WORD; qg++) {
> +		reg_aq = acc100_reg_read(d,
> +				queue_offset(d->pf_device, 0, qg, 0));
> +		if (reg_aq & QUEUE_ENABLE) {
> +			acc = qman_func_id[(reg >> (qg * 4)) & 0x7];
0x7 and [5], this could overflow.
> +			updateQtop(acc, qg, acc100_conf, d);
> +		}
> +	}
> +
> +	/* Check the depth of the AQs*/
> +	reg_len0 = acc100_reg_read(d, reg_addr->depth_log0_offset);
> +	reg_len1 = acc100_reg_read(d, reg_addr->depth_log1_offset);
> +	for (acc = 0; acc < NUM_ACC; acc++) {
> +		qtopFromAcc(&q_top, acc, acc100_conf);
> +		if (q_top->first_qgroup_index < ACC100_NUM_QGRPS_PER_WORD)
> +			q_top->aq_depth_log2 = (reg_len0 >>
> +					(q_top->first_qgroup_index * 4))
> +					& 0xF;
> +		else
> +			q_top->aq_depth_log2 = (reg_len1 >>
> +					((q_top->first_qgroup_index -
> +					ACC100_NUM_QGRPS_PER_WORD) * 4))
> +					& 0xF;
> +	}
> +
> +	/* Read PF mode */
> +	if (d->pf_device) {
> +		reg_mode = acc100_reg_read(d, HWPfHiPfMode);
> +		acc100_conf->pf_mode_en = (reg_mode == 2) ? 1 : 0;

2 is a magic number, consider a #define

Tom

> +	}
> +
> +	rte_bbdev_log_debug(
> +			"%s Config LLR SIGN IN/OUT %s %s QG %u %u %u %u AQ %u %u %u %u Len %u %u %u %u\n",
> +			(d->pf_device) ? "PF" : "VF",
> +			(acc100_conf->input_pos_llr_1_bit) ? "POS" : "NEG",
> +			(acc100_conf->output_pos_llr_1_bit) ? "POS" : "NEG",
> +			acc100_conf->q_ul_4g.num_qgroups,
> +			acc100_conf->q_dl_4g.num_qgroups,
> +			acc100_conf->q_ul_5g.num_qgroups,
> +			acc100_conf->q_dl_5g.num_qgroups,
> +			acc100_conf->q_ul_4g.num_aqs_per_groups,
> +			acc100_conf->q_dl_4g.num_aqs_per_groups,
> +			acc100_conf->q_ul_5g.num_aqs_per_groups,
> +			acc100_conf->q_dl_5g.num_aqs_per_groups,
> +			acc100_conf->q_ul_4g.aq_depth_log2,
> +			acc100_conf->q_dl_4g.aq_depth_log2,
> +			acc100_conf->q_ul_5g.aq_depth_log2,
> +			acc100_conf->q_dl_5g.aq_depth_log2);
> +}
> +
>  /* Free 64MB memory used for software rings */
>  static int
>  acc100_dev_close(struct rte_bbdev *dev  __rte_unused)
> @@ -33,8 +211,55 @@
>  	return 0;
>  }
>  
> +/* Get ACC100 device info */
> +static void
> +acc100_dev_info_get(struct rte_bbdev *dev,
> +		struct rte_bbdev_driver_info *dev_info)
> +{
> +	struct acc100_device *d = dev->data->dev_private;
> +
> +	static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
> +		RTE_BBDEV_END_OF_CAPABILITIES_LIST()
> +	};
> +
> +	static struct rte_bbdev_queue_conf default_queue_conf;
> +	default_queue_conf.socket = dev->data->socket_id;
> +	default_queue_conf.queue_size = MAX_QUEUE_DEPTH;
> +
> +	dev_info->driver_name = dev->device->driver->name;
> +
> +	/* Read and save the populated config from ACC100 registers */
> +	fetch_acc100_config(dev);
> +
> +	/* This isn't ideal because it reports the maximum number of queues but
> +	 * does not provide info on how many can be uplink/downlink or different
> +	 * priorities
> +	 */
> +	dev_info->max_num_queues =
> +			d->acc100_conf.q_dl_5g.num_aqs_per_groups *
> +			d->acc100_conf.q_dl_5g.num_qgroups +
> +			d->acc100_conf.q_ul_5g.num_aqs_per_groups *
> +			d->acc100_conf.q_ul_5g.num_qgroups +
> +			d->acc100_conf.q_dl_4g.num_aqs_per_groups *
> +			d->acc100_conf.q_dl_4g.num_qgroups +
> +			d->acc100_conf.q_ul_4g.num_aqs_per_groups *
> +			d->acc100_conf.q_ul_4g.num_qgroups;
> +	dev_info->queue_size_lim = MAX_QUEUE_DEPTH;
> +	dev_info->hardware_accelerated = true;
> +	dev_info->max_dl_queue_priority =
> +			d->acc100_conf.q_dl_4g.num_qgroups - 1;
> +	dev_info->max_ul_queue_priority =
> +			d->acc100_conf.q_ul_4g.num_qgroups - 1;
> +	dev_info->default_queue_conf = default_queue_conf;
> +	dev_info->cpu_flag_reqs = NULL;
> +	dev_info->min_alignment = 64;
> +	dev_info->capabilities = bbdev_capabilities;
> +	dev_info->harq_buffer_size = d->ddr_size;
> +}
> +
>  static const struct rte_bbdev_ops acc100_bbdev_ops = {
>  	.close = acc100_dev_close,
> +	.info_get = acc100_dev_info_get,
>  };
>  
>  /* ACC100 PCI PF address map */
> diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
> index cd77570..662e2c8 100644
> --- a/drivers/baseband/acc100/rte_acc100_pmd.h
> +++ b/drivers/baseband/acc100/rte_acc100_pmd.h
> @@ -7,6 +7,7 @@
>  
>  #include "acc100_pf_enum.h"
>  #include "acc100_vf_enum.h"
> +#include "rte_acc100_cfg.h"
>  
>  /* Helper macro for logging */
>  #define rte_bbdev_log(level, fmt, ...) \
> @@ -520,6 +521,8 @@ struct acc100_registry_addr {
>  /* Private data structure for each ACC100 device */
>  struct acc100_device {
>  	void *mmio_base;  /**< Base address of MMIO registers (BAR0) */
> +	uint32_t ddr_size; /* Size in kB */
> +	struct acc100_conf acc100_conf; /* ACC100 Initial configuration */
>  	bool pf_device; /**< True if this is a PF ACC100 device */
>  	bool configured; /**< True if this ACC100 device is configured */
>  };