[dpdk-dev] [PATCH v7 2/2] app/testpmd: fix testpmd doesn't show RSS hash offload
Li, Xiaoyun
xiaoyun.li at intel.com
Fri Aug 27 09:36:04 CEST 2021
Hi
> -----Original Message-----
> From: Wang, Jie1X <jie1x.wang at intel.com>
> Sent: Thursday, August 26, 2021 15:09
> To: dev at dpdk.org
> Cc: Li, Xiaoyun <xiaoyun.li at intel.com>; andrew.rybchenko at oktetlabs.ru;
> thomas at monjalon.net; Yigit, Ferruh <ferruh.yigit at intel.com>; Wang, Jie1X
> <jie1x.wang at intel.com>
> Subject: [PATCH v7 2/2] app/testpmd: fix testpmd doesn't show RSS hash
> offload
>
> The driver may change offloads info into dev->data->dev_conf in dev_configure
> which may cause port->dev_conf and port->rx_conf contain outdated values.
>
> This patch updates the offloads info if it changes to fix this issue.
>
> Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
>
> Signed-off-by: Jie Wang <jie1x.wang at intel.com>
> ---
> app/test-pmd/testpmd.c | 33 +++++++++++++++++++++++++++++++++
> app/test-pmd/testpmd.h | 2 ++
> app/test-pmd/util.c | 15 +++++++++++++++
> 3 files changed, 50 insertions(+)
>
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 6cbe9ba3c8..c0bdb740fe 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2461,6 +2461,9 @@ start_port(portid_t pid)
> }
>
> if (port->need_reconfig > 0) {
> + struct rte_eth_conf dev_conf_info;
> + int k;
> +
> port->need_reconfig = 0;
>
> if (flow_isolate_all) {
> @@ -2498,6 +2501,36 @@ start_port(portid_t pid)
> port->need_reconfig = 1;
> return -1;
> }
> + /* get offloads */
> + if (0 !=
> + eth_dev_conf_info_get_print_err(pi,
> + &dev_conf_info)) {
> + rte_exit(EXIT_FAILURE,
> + "rte_eth_dev_conf_info_get() failed\n");
rte_exit will directly exit the program. "return -1" after this won't work. Please just print errlog and return -1 like other failures.
> + return -1;
> + }
> + /* Apply Rx offloads configuration */
> + if (dev_conf_info.rxmode.offloads !=
> + port->dev_conf.rxmode.offloads) {
> + port->dev_conf.rxmode.offloads =
> + dev_conf_info.rxmode.offloads;
> + for (k = 0;
> + k < port->dev_info.max_rx_queues;
> + k++)
> + port->rx_conf[k].offloads =
> +
> dev_conf_info.rxmode.offloads;
> + }
> + /* Apply Tx offloads configuration */
> + if (dev_conf_info.txmode.offloads !=
> + port->dev_conf.txmode.offloads) {
> + port->dev_conf.txmode.offloads =
> + dev_conf_info.txmode.offloads;
> + for (k = 0;
> + k < port->dev_info.max_tx_queues;
> + k++)
> + port->tx_conf[k].offloads =
> +
> dev_conf_info.txmode.offloads;
> + }
> }
> if (port->need_reconfig_queues > 0) {
> port->need_reconfig_queues = 0;
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
> 16a3598e48..6970a20ee4 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -950,6 +950,8 @@ void show_gro(portid_t port_id); void setup_gso(const
> char *mode, portid_t port_id); int eth_dev_info_get_print_err(uint16_t port_id,
> struct rte_eth_dev_info *dev_info);
> +int eth_dev_conf_info_get_print_err(uint16_t port_id,
> + struct rte_eth_conf *dev_conf_info);
> void eth_set_promisc_mode(uint16_t port_id, int enable); void
> eth_set_allmulticast_mode(uint16_t port, int enable); int
> eth_link_get_nowait_print_err(uint16_t port_id, struct rte_eth_link *link); diff --
> git a/app/test-pmd/util.c b/app/test-pmd/util.c index 5dd7157947..170d8f5c61
> 100644
> --- a/app/test-pmd/util.c
> +++ b/app/test-pmd/util.c
> @@ -440,6 +440,21 @@ eth_dev_info_get_print_err(uint16_t port_id,
> return ret;
> }
>
> +int
> +eth_dev_conf_info_get_print_err(uint16_t port_id,
> + struct rte_eth_conf *dev_conf_info) {
> + int ret;
> +
> + ret = rte_eth_dev_conf_info_get(port_id, dev_conf_info);
> + if (ret != 0)
> + fprintf(stderr,
> + "Error during getting device configuration (port %u)
> info: %s\n",
> + port_id, strerror(-ret));
> +
> + return ret;
> +}
> +
> void
> eth_set_promisc_mode(uint16_t port, int enable) {
> --
> 2.25.1
More information about the dev
mailing list