[dpdk-dev] [dpdklab] Re: [dpdk-ci] [CI] SPDK compilation failures @ DPDK community lab

Zawadzki, Tomasz tomasz.zawadzki at intel.com
Wed Feb 17 17:06:41 CET 2021


Hi folks,

Patch in question is now part of v21.01.x branch and tests in UNH lab can make use of it.
https://github.com/spdk/spdk/commit/14eeeea669010247fa8d6c7ce53b2e69fcfaa858

If possible, removing '--without-vhost' would be best going forward. Then SPDK compilation tests would cover rte_vhost too.

Thanks,
Tomek

> -----Original Message-----
> From: Aaron Conole <aconole at redhat.com>
> Sent: Monday, February 15, 2021 4:28 PM
> To: Brandon Lo <blo at iol.unh.edu>
> Cc: Zawadzki, Tomasz <tomasz.zawadzki at intel.com>; Lincoln Lavoie
> <lylavoie at iol.unh.edu>; dpdklab at iol.unh.edu; ci at dpdk.org; dev at dpdk.org;
> spdk at lists.01.org
> Subject: Re: [dpdklab] Re: [dpdk-ci] [dpdk-dev] [CI] SPDK compilation failures
> @ DPDK community lab
> 
> Brandon Lo <blo at iol.unh.edu> writes:
> 
> > Hi Tomek,
> >
> > I do not think we have a specific reason for disabling vhost. I can
> > look into enabling it and get back to you on that.
> 
> I did a test, but I had to hack up the dockerfile and compile script a bit.
> 
> I removed the '--without-vhost' (I also modified it to pull dpdk and SPDK from
> their respective 'main'/'master' branches).  The build completed successfully.
> 
> I will update the BZ with this information.  Can you try testing with the '--
> without-vhost' removed from the compile_spdk.sh line, and if that is
> successful we can modify the job and re-enable?
> 
> > Thanks,
> > Brandon
> >
> > On Fri, Feb 12, 2021 at 4:18 AM Zawadzki, Tomasz
> > <tomasz.zawadzki at intel.com> wrote:
> >>
> >> Hi,
> >>
> >> As Aaron noted this was result of rte_ethdev depending on rte_net.
> >> On SPDK side rte_net was included in default compilation with vhost
> >> component, but since vhost is disabled in the UNH lab tests with SPDK
> >> it showed up as missing. A fix for that is now submitted to
> >> SPDK:
> >> https://review.spdk.io/gerrit/c/spdk/spdk/+/6398
> >> I'll let you know when it makes it's way to the v21.01.x branch.
> >>
> >> @Brandon Lo General question, is there particular reason to disable
> >> vhost [configure argument '--without-vhost'] in the UNH lab tests
> >> with SPDK ?
> >> I don't recall any identified issue and enabling it would increase
> >> the coverage of the compilation tests.
> >>
> >> Thanks,
> >> Tomek
> >>
> >> > -----Original Message-----
> >> > From: Aaron Conole <aconole at redhat.com>
> >> > Sent: Thursday, February 11, 2021 3:02 PM
> >> > To: Brandon Lo <blo at iol.unh.edu>
> >> > Cc: Zawadzki, Tomasz <tomasz.zawadzki at intel.com>; Lincoln Lavoie
> >> > <lylavoie at iol.unh.edu>; dpdklab at iol.unh.edu; ci at dpdk.org;
> >> > dev at dpdk.org; spdk at lists.01.org
> >> > Subject: Re: [dpdklab] Re: [dpdk-ci] [dpdk-dev] [CI] SPDK
> >> > compilation failures @ DPDK community lab
> >> >
> >> > Brandon Lo <blo at iol.unh.edu> writes:
> >> >
> >> > > Hi again everyone,
> >> > >
> >> > > I have checked the pipelines with SPDK branch v21.01.x on the
> >> > > main DPDK
> >> > branch.
> >> > > It still seems to have an issue with compilation, and I have
> >> > > attached a log of a Fedora SPDK compilation.
> >> > > There are some undefined references to "rte_ether_unformat_addr"
> >> > > I will continue to look into this. If you have any ideas on how
> >> > > to fix this, please let me know.
> >> >
> >> > Looks like rte_ethdev depends on rte_net - maybe I missed something.
> >> >
> >> > Brandon, can we disable this test for the time being since it's
> >> > been failing for a while now?  Can you also send me the container
> >> > image / definitions you're using so that I can help work on this?
> >> >
> >> > > Thanks,
> >> > > Brandon
> >> > >
> >> > > On Tue, Feb 9, 2021 at 11:07 AM Brandon Lo <blo at iol.unh.edu>
> wrote:
> >> > >>
> >> > >> Hi everyone,
> >> > >>
> >> > >> I will adjust the branches and watch over the first few
> >> > >> pipelines to make sure everything goes smoothly.
> >> > >>
> >> > >> Thanks for the update,
> >> > >> Brandon
> >> > >>
> >> > >> On Tue, Feb 9, 2021 at 10:13 AM Aaron Conole
> >> > >> <aconole at redhat.com>
> >> > wrote:
> >> > >> >
> >> > >> > "Zawadzki, Tomasz" <tomasz.zawadzki at intel.com> writes:
> >> > >> >
> >> > >> > > Hi Lincoln,
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > That patch in question is now merged to branch v21.01.x.
> >> > >> > >
> >> > >> >
> >> > >> > Good to know - I do still see a failure in the IOL job (even
> >> > >> > from a few hours ago).  I suppose the lab side might need some
> >> > >> > adjustment,
> >> > too?
> >> > >> >
> >> > >> > >
> >> > >> > > The builds performed for latest SPDK and SPDK LTS, against
> >> > >> > > dpdk-main branch seem to be passing. Would love to hear if
> >> > >> > > this is what you are seeing on your end too.
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > Thanks,
> >> > >> > >
> >> > >> > > Tomek
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > From: Lincoln Lavoie <lylavoie at iol.unh.edu>
> >> > >> > > Sent: Monday, February 8, 2021 5:21 PM
> >> > >> > > To: Zawadzki, Tomasz <tomasz.zawadzki at intel.com>
> >> > >> > > Cc: Aaron Conole <aconole at redhat.com>; Brandon Lo
> >> > >> > > <blo at iol.unh.edu>; dpdklab at iol.unh.edu; ci at dpdk.org;
> >> > >> > > dev at dpdk.org; spdk at lists.01.org
> >> > >> > > Subject: Re: [dpdk-ci] [dpdk-dev] [CI] SPDK compilation
> >> > >> > > failures @ DPDK community lab
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > Thanks Tomek,
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > Can you let us know when the merge happens and we'll make
> >> > >> > > sure the next set of builds pass or see what the next
> >> > >> > > failure is. :-P
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > Cheers,
> >> > >> > > Lincoln
> >> > >> > >
> >> > >> > >
> >> > >> > >
> >> > >> > > On Mon, Feb 8, 2021 at 11:03 AM Zawadzki, Tomasz
> >> > <tomasz.zawadzki at intel.com> wrote:
> >> > >> > >
> >> > >> > >  Hi Aaron,
> >> > >> > >
> >> > >> > >  Thank you for reporting this !
> >> > >> > >
> >> > >> > >  This is an issue with rte_power now depending on
> >> > >> > > rte_ethdev, which
> >> > was resolved on latest SPDK.
> >> > >> > >
> >> > >> > >  I believe that UNH lab verifies DPDK patches against SPDK
> >> > >> > > branch for latest release. Which after the very recent SPDK
> >> > >> > > release, would be v21.01.x:
> >> > >> > >  https://github.com/spdk/spdk/tree/v21.01.x
> >> > >> > >
> >> > >> > >  The fix has been backported to that branch and should be
> >> > >> > > merged
> >> > shortly:
> >> > >> > >  https://review.spdk.io/gerrit/c/spdk/spdk/+/6320
> >> > >> > >
> >> > >> > >  Thanks,
> >> > >> > >  Tomek
> >> > >> > >
> >> > >> > >  > -----Original Message-----  > From: dev
> >> > >> > > <dev-bounces at dpdk.org> On Behalf Of Aaron Conole  >
> >> > >> > > Sent: Monday, February 8, 2021 4:21 PM  > To: Brandon Lo
> >> > >> > > <blo at iol.unh.edu>  > Cc: dpdklab at iol.unh.edu; ci at dpdk.org;
> >> > >> > > dev at dpdk.org; spdk at lists.01.org  > Subject: [dpdk-dev] [CI]
> >> > >> > > SPDK compilation failures @ DPDK community lab  >  >
> >> > >> > > Greetings,  >  > I've noticed that recently SPDK compilation
> >> > >> > > in the UNH community lab seems  > to be failing, and I don't
> >> > >> > > see an obvious reason for the
> >> > failure.
> >> > >> > >  > The logs haven't been too helpful - it appears that there
> >> > >> > > is a symbol that isn't  > available when linking.
> >> > >> > >  >
> >> > >> > >  > Job details (for example):
> >> > >> > >  > https://lab.dpdk.org/results/dashboard/results/results-
> >> > >> > >  >
> >> > >> > >
> >> >
> uploads/test_runs/2363efb43157465db3228c34c00ebd57/log_upload_fil
> >> > >> > > e/20  >
> >> > >> > > 21/2/dpdk_f6f2d2240153_15524_2021-02-04_22-59-59_NA.zip
> >> > >> > >  >
> >> > >> > >  > Is it possible to turn on more verbose logging during the
> >> > >> > > compilation of  > SPDK?  Maybe show the arguments to the
> >> > >> > > compiler
> >> > for the specific object?
> >> > >> > >  > Maybe the SPDK folks can see something obviously wrong?
> >> > >> > >  >
> >> > >> > >  > Thanks,
> >> > >> > >  > -Aaron
> >> > >> >
> >> > >>
> >> > >>
> >> > >> --
> >> > >>
> >> > >> Brandon Lo
> >> > >>
> >> > >> UNH InterOperability Laboratory
> >> > >>
> >> > >> 21 Madbury Rd, Suite 100, Durham, NH 03824
> >> > >>
> >> > >> blo at iol.unh.edu
> >> > >>
> >> > >> www.iol.unh.edu
> >>



More information about the dev mailing list