[dpdk-dev] [EXT] Re: [PATCH 4/4] drivers/net/enetfec: add enqueue and dequeue support

[Apeksha Gupta]

Hi,

I will be reworking on the 'enetfec' driver. It may take time to send the V2 patch.

Thanks & Regards,
Apeksha

> -----Original Message-----
> From: Andrew Rybchenko <andrew.rybchenko at oktetlabs.ru>
> Sent: Tuesday, June 8, 2021 7:12 PM
> To: Apeksha Gupta <apeksha.gupta at nxp.com>; ferruh.yigit at intel.com
> Cc: dev at dpdk.org; Hemant Agrawal <hemant.agrawal at nxp.com>; Sachin
> Saxena <sachin.saxena at nxp.com>
> Subject: [EXT] Re: [dpdk-dev] [PATCH 4/4] drivers/net/enetfec: add enqueue and
> dequeue support
> 
> Caution: EXT Email
> 
> On 4/30/21 7:34 AM, Apeksha Gupta wrote:
> > This patch supported checksum offloads and add burst enqueue and
> > dequeue operations to the enetfec PMD.
> >
> > Loopback mode is added, compile time flag 'ENETFEC_LOOPBACK' is
> > used to enable this feature. By default loopback mode is disabled.
> > Basic features added like promiscuous enable, basic stats.
> 
> Please, apply style fixes from the previous patches
> to the patch as well.
> 
> >
> > Signed-off-by: Sachin Saxena <sachin.saxena at nxp.com>
> > Signed-off-by: Apeksha Gupta <apeksha.gupta at nxp.com>
> > ---
> >  doc/guides/nics/enetfec.rst          |   4 +
> >  doc/guides/nics/features/enetfec.ini |   5 +
> >  drivers/net/enetfec/enet_ethdev.c    | 212 +++++++++++-
> >  drivers/net/enetfec/enet_rxtx.c      | 499 +++++++++++++++++++++++++++
> >  4 files changed, 719 insertions(+), 1 deletion(-)
> >  create mode 100644 drivers/net/enetfec/enet_rxtx.c
> >
> > diff --git a/doc/guides/nics/enetfec.rst b/doc/guides/nics/enetfec.rst
> > index 10f495fb9..adbb52392 100644
> > --- a/doc/guides/nics/enetfec.rst
> > +++ b/doc/guides/nics/enetfec.rst
> > @@ -75,6 +75,10 @@ ENETFEC driver.
> >  ENETFEC Features
> >  ~~~~~~~~~~~~~~~~~
> >
> > +- Basic stats
> > +- Promiscuous
> > +- VLAN offload
> > +- L3/L4 checksum offload
> >  - ARMv8
> >
> >  Supported ENETFEC SoCs
> > diff --git a/doc/guides/nics/features/enetfec.ini
> b/doc/guides/nics/features/enetfec.ini
> > index 570069798..fcc217773 100644
> > --- a/doc/guides/nics/features/enetfec.ini
> > +++ b/doc/guides/nics/features/enetfec.ini
> > @@ -4,5 +4,10 @@
> >  ; Refer to default.ini for the full list of available PMD features.
> >  ;
> >  [Features]
> > +Basic stats          = Y
> > +Promiscuous mode     = Y
> > +VLAN offload         = Y
> > +L3 checksum offload  = Y
> > +L4 checksum offload  = Y
> 
> I don't understand why all above features are in the patch.
> It looks like all could be added one by one after
> the patch with adds basic Rx/Tx suppport.