[dpdk-dev] [PATCH 3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in testpmd

[oulijun]

在 2021/3/5 11:25, Li, Xiaoyun 写道:
> Hi
> 
>> -----Original Message-----
>> From: dev <dev-bounces at dpdk.org> On Behalf Of Lijun Ou
>> Sent: Friday, March 5, 2021 08:56
>> To: Yigit, Ferruh <ferruh.yigit at intel.com>
>> Cc: dev at dpdk.org; linuxarm at openeuler.org
>> Subject: [dpdk-dev] [PATCH 3/3] app/testpmd: fix mixed use of RX/Rx/TX/Tx in
>> testpmd
>>
>> From: Hongbo Zheng <zhenghongbo3 at huawei.com>
>>
>> In testpmd, when we input "show config rxtx", we can see like this:
>>
>> 1: testpmd> show config rxtx
>> 2:   io packet forwarding packets/burst=32
>> 3:   nb forwarding cores=1 - nb forwarding ports=1
>> 4:   port 0: RX queue number: 1 Tx queue number: 1
>> 5:     Rx offloads=0x0 Tx offloads=0x10000
>> 6:     RX queue: 0
>> 7:       RX desc=1024 - RX free threshold=32
>> 8:       RX threshold registers: pthresh=0 hthresh=0  wthresh=0
>> 9:       RX Offloads=0x0
>> 10:    TX queue: 0
>> 11:      TX desc=1024 - TX free threshold=928
>> 12:      TX threshold registers: pthresh=0 hthresh=0  wthresh=0
>> 13:      TX offloads=0x10000 - TX RS bit threshold=32
>>
>> In line 4, RX/Tx is mixed used. Also in other lines, RX/Rx/TX/Tx is mixed used.
> 
> If you're going to unify the print to only use "Rx/Tx" in testpmd as your title said.
> There're a lot of more places using RX/TX when printing. You should change them too.
> 
OK， I will do it.
>>
>> This patch fix the mixed use of RX/Rx/TX/Tx in testpmd command "show config
>> rxtx" output by change to unified use Rx/Tx.
>>
>> Signed-off-by: Hongbo Zheng <zhenghongbo3 at huawei.com>
>> Signed-off-by: Lijun Ou <oulijun at huawei.com>
>> ---
>>   app/test-pmd/config.c | 18 +++++++++---------
>>   1 file changed, 9 insertions(+), 9 deletions(-)
>>
>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
>> 576d5ac..2435c26 100644
>> --- a/app/test-pmd/config.c
>> +++ b/app/test-pmd/config.c
>> @@ -2505,7 +2505,7 @@ rxtx_config_display(void)
>>   		int32_t rc;
>>
>>   		/* per port config */
>> -		printf("  port %d: RX queue number: %d Tx queue
>> number: %d\n",
>> +		printf("  port %d: Rx queue number: %d Tx queue number: %d\n",
>>   				(unsigned int)pid, nb_rxq, nb_txq);
>>
>>   		printf("    Rx offloads=0x%"PRIx64" Tx offloads=0x%"PRIx64"\n",
>> @@ -2533,13 +2533,13 @@ rxtx_config_display(void)
>>   				offloads_tmp = rx_qinfo.conf.offloads;
>>   			}
>>
>> -			printf("    RX queue: %d\n", qid);
>> -			printf("      RX desc=%d - RX free threshold=%d\n",
>> +			printf("    Rx queue: %d\n", qid);
>> +			printf("      Rx desc=%d - Rx free threshold=%d\n",
>>   				nb_rx_desc_tmp, rx_free_thresh_tmp);
>> -			printf("      RX threshold registers: pthresh=%d
>> hthresh=%d "
>> +			printf("      Rx threshold registers: pthresh=%d
>> hthresh=%d "
>>   				" wthresh=%d\n",
>>   				pthresh_tmp, hthresh_tmp, wthresh_tmp);
>> -			printf("      RX Offloads=0x%"PRIx64"\n", offloads_tmp);
>> +			printf("      Rx Offloads=0x%"PRIx64"\n", offloads_tmp);
>>   		}
>>
>>   		/* per tx queue config only for first queue to be less verbose */
>> @@ -2565,13 +2565,13 @@ rxtx_config_display(void)
>>   				tx_rs_thresh_tmp = tx_qinfo.conf.tx_rs_thresh;
>>   			}
>>
>> -			printf("    TX queue: %d\n", qid);
>> -			printf("      TX desc=%d - TX free threshold=%d\n",
>> +			printf("    Tx queue: %d\n", qid);
>> +			printf("      Tx desc=%d - Tx free threshold=%d\n",
>>   				nb_tx_desc_tmp, tx_free_thresh_tmp);
>> -			printf("      TX threshold registers: pthresh=%d
>> hthresh=%d "
>> +			printf("      Tx threshold registers: pthresh=%d
>> hthresh=%d "
>>   				" wthresh=%d\n",
>>   				pthresh_tmp, hthresh_tmp, wthresh_tmp);
>> -			printf("      TX offloads=0x%"PRIx64" - TX RS bit
>> threshold=%d\n",
>> +			printf("      Tx offloads=0x%"PRIx64" - Tx RS bit
>> threshold=%d\n",
>>   				offloads_tmp, tx_rs_thresh_tmp);
>>   		}
>>   	}
>> --
>> 2.7.4
> 
> .
>