[dpdk-dev] [PATCH v3 2/5] test/crypto: add combined mode tests

[Anoob Joseph]

HI Ciara,

Please see inline.

Thanks,
Anoob

> 
> External Email
> 
> ----------------------------------------------------------------------
> Hi Anoob,
> 
> 
> >-----Original Message-----
> >From: Anoob Joseph <anoobj at marvell.com>
> >Sent: Friday 3 September 2021 11:05
> >To: Power, Ciara <ciara.power at intel.com>; Akhil Goyal
> ><gakhil at marvell.com>; Doherty, Declan <declan.doherty at intel.com>;
> >Zhang, Roy Fan <roy.fan.zhang at intel.com>; Ananyev, Konstantin
> ><konstantin.ananyev at intel.com>
> >Cc: Jerin Jacob Kollanukkaran <jerinj at marvell.com>; Archana Muniganti
> ><marchana at marvell.com>; Tejasree Kondoj <ktejasree at marvell.com>;
> Hemant
> >Agrawal <hemant.agrawal at nxp.com>; Nicolau, Radu
> ><radu.nicolau at intel.com>; Gagandeep Singh <g.singh at nxp.com>;
> >dev at dpdk.org
> >Subject: RE: [PATCH v3 2/5] test/crypto: add combined mode tests
> >
> >Hi Ciara,
> >
> >Please see inline.
> >
> >Thanks,
> >Anoob
> >
> >>
> >> External Email
> >>
> >> ---------------------------------------------------------------------
> >> -
> >> Hi Anoob,
> >>
> >> >-----Original Message-----
> >> >From: Anoob Joseph <anoobj at marvell.com>
> >> >Sent: Friday 3 September 2021 05:47
> >> >To: Akhil Goyal <gakhil at marvell.com>; Doherty, Declan
> >> ><declan.doherty at intel.com>; Zhang, Roy Fan
> >> ><roy.fan.zhang at intel.com>; Ananyev, Konstantin
> >> ><konstantin.ananyev at intel.com>
> >> >Cc: Anoob Joseph <anoobj at marvell.com>; Jerin Jacob
> >> ><jerinj at marvell.com>; Archana Muniganti <marchana at marvell.com>;
> >> >Tejasree Kondoj <ktejasree at marvell.com>; Hemant Agrawal
> >> ><hemant.agrawal at nxp.com>; Nicolau, Radu <radu.nicolau at intel.com>;
> >> >Power, Ciara <ciara.power at intel.com>; Gagandeep Singh
> >> ><g.singh at nxp.com>; dev at dpdk.org
> >> >Subject: [PATCH v3 2/5] test/crypto: add combined mode tests
> >> >
> >> >Add framework to test IPsec features with all supported combinations
> >> >of
> >> ciphers.
> >> >
> >> >Signed-off-by: Anoob Joseph <anoobj at marvell.com>
> >> >Signed-off-by: Tejasree Kondoj <ktejasree at marvell.com>
> >> >---
> >> <snip>
> >>
> >> >+static int
> >> >+test_ipsec_proto_all(const struct ipsec_test_flags *flags) {
> >> >+	struct ipsec_test_data td_outb[IPSEC_TEST_PACKETS_MAX];
> >> >+	struct ipsec_test_data td_inb[IPSEC_TEST_PACKETS_MAX];
> >> >+	unsigned int i, nb_pkts = 1, pass_cnt = 0;
> >> >+	int ret;
> >> >+
> >>
> >> Is this testcase actually running multiple testcases under the hood?
> >> I wonder could it be suited to use a sub-testsuite structure to bring
> >> the testcase results up to the top level, as done with cryptodev
> >> blockcipher
> >tests.
> >> Have you considered this approach?
> >
> >[Anoob] The idea behind this framework is to test an IPsec feature
> >(like UDP
> >encapsulation) without tying it to any specific algorithm. So what this
> >does is, it loops over a list of possible combinations and then runs
> >the test for each combination. The test would be like this,
> >
> >1. Do outbound processing to generate encrypted packet 2. Basic checks
> >or validation as required for the test (for example, with UDP
> >encapsulation, we would validate UDP hdr in the processed packet).
> >3. Any manipulations required (like for ICV corruption negative test)
> >4. Do inbound processing to get decrypted packet 5. Validate results
> >based on the type of test (ICV corruption would give expect an error
> >while normal tests would have the operation return original plain text
> >packet)
> >
> >It's actually the array (aead_list) and this loop which initiates the
> >test to be run for all algos. And, since we are not having static
> >vectors for each test case, this approach seemed more straightforward.
> >Do you think sub-testsuite makes more sense here?
> >
> 
> Thanks for the explanation.
> I still think having each test reporting its individual result to the top level
> provides more clarity when running tests, rather than having multiple tests
> being run under the disguise of one, and reporting one result.
> 
> Even without the sub-testsuite approach, I wonder could something such as
> the following be more descriptive when looking at results?
> 
> static struct unit_test_suite ipsec_proto_testsuite  = {
> 	.suite_name = "IPsec Proto Unit Test Suite",
> 	.setup = ipsec_proto_testsuite_setup,
> 	.unit_test_cases = {
> 		< Inbound known vector test cases as before >
> 
> 		TEST_CASE_NAMED_WITH_DATA(
> 			"Combination test (AES-GCM 128)",
> 			ut_setup_security, ut_teardown,
> 			test_ipsec_proto_display_list, &aead_list[0]),
> 		TEST_CASE_NAMED_WITH_DATA(
> 			"Combination test (AES-GCM 192)",
> 			ut_setup_security, ut_teardown,
> 			test_ipsec_proto_display_list, &aead_list[1]),
> 		TEST_CASE_NAMED_WITH_DATA(
> 			"Combination test (AES-GCM 256)",
> 			ut_setup_security, ut_teardown,
> 			test_ipsec_proto_display_list, &aead_list[2]),
> 
> 		TEST_CASE_NAMED_WITH_DATA(
> 			"IV Generation (AES-GCM 128)",
> 			ut_setup_security, ut_teardown,
> 			test_ipsec_proto_iv_gen, &aead_list[0]),
> 
> 		etc.
> }
> 
> static int
> test_ipsec_proto_display_list(const void *data) {
> 	struct ipsec_test_flags flags;
> 
> 	memset(&flags, 0, sizeof(flags));
> 
> 	flags.display_alg = true;
> 
> 	return test_ipsec_proto(&flags, (const struct crypto_param *)data); }
> 
> static int
> test_ipsec_proto(const struct ipsec_test_flags *flags, const struct
> crypto_param *data) {
> 	struct ipsec_test_data td_outb[IPSEC_TEST_PACKETS_MAX];
> 	struct ipsec_test_data td_inb[IPSEC_TEST_PACKETS_MAX];
> 	unsigned int i, nb_pkts = 1, pass_cnt = 0;
> 	int ret;
> 
> 	if (flags->iv_gen)
> 		nb_pkts = IPSEC_TEST_PACKETS_MAX;
> 
> 
> 	test_ipsec_td_prepare(&data,
> 				      NULL,
> 				      flags,
> 				      td_outb,
> 				      nb_pkts);
> 
> < the rest of the function as before but without the loop, using data instead
> of looping aead values >

[Anoob] Your suggestion is to not have the loop walk through `aead_list` but instead let the list be defined by test-suite, right?

I agree regarding result reporting part. Squashing all results into one may not be the most desired. But then I didn't want to bombard with large number of prints from IPsec tests, either.

The only issue I see is with a long list of tests. We are actually preparing chained mode tests which would have combinations. Like, if we have AES-CBC & 3DES-CBC supported as ciphers and NULL, SHA1, SHA2 as auth supported, then we are talking about 6 combinations. And currently we have the following tests,

1. ICV corruption
2. IV generation
3. UDP encapsulation

In pipeline (submitted with proposals)
1. Soft expiry
2. Hard expiry
3. IP hdr verify
4. UDP port verify

And if we consider some of the more fundamental tests that we would add like
1. AH
2. Transport
3. Tunnel (IPv4 in IPv4)
4. Tunnel (IPv4 in IPv6)
5. Tunnel (IPv6 in IPv4)
6. Tunnel (IPv6 in IPv6)

Each of the above would become more like test suite on its own and then we would have the list just duplicated for each kind of feature test. But then, let me check an alternate approach. More like,

1. Let the common test suite setup function set flags etc to denote the IPsec feature (be it ICV corruption or UDP encap)
2. The list of tests (cipher combinations) would be common for all feature tests. 

Would something like this work?