[dpdk-dev] [PATCH v5 1/9] bbdev: add big endian processing data capability

[Nipun Gupta]

> -----Original Message-----
> From: Chautru, Nicolas <nicolas.chautru at intel.com>
> Sent: Tuesday, September 14, 2021 12:10 AM
> To: Nipun Gupta <nipun.gupta at nxp.com>; dev at dpdk.org; gakhil at marvell.com
> Cc: david.marchand at redhat.com; Hemant Agrawal
> <hemant.agrawal at nxp.com>; Tom Rix <trix at redhat.com>
> Subject: RE: [PATCH v5 1/9] bbdev: add big endian processing data capability
> 
> 
> 
> > -----Original Message-----
> > From: Nipun Gupta <nipun.gupta at nxp.com>
> > Sent: Sunday, September 12, 2021 5:15 AM
> > To: dev at dpdk.org; gakhil at marvell.com; Chautru, Nicolas
> > <nicolas.chautru at intel.com>
> > Cc: david.marchand at redhat.com; hemant.agrawal at nxp.com; Nipun Gupta
> > <nipun.gupta at nxp.com>
> > Subject: [PATCH v5 1/9] bbdev: add big endian processing data capability
> >
> > This patch intoduces a new capability of the bbdev device to process the
> > LDPC data in big endian order.
> 
> Hi Gupta,
> 
> As mentioned in previous patch iteration earlier this year I believe this is not
> really an operation flag but more a different device capability.
> ie. you would have the same formalism for all operation (5GDL, 5GUL, 4GDL, ...)
> for that PMD/hw and that is not something you will change dynamically as an
> option.
> I would suggest to add this under "struct rte_bbdev_driver_info" which can be
> used to capture device specific capability and information. In term of processing
> and operation, everything is the same except endianness assumption for the
> input/output data.

Okay, it can be done this way. Then it would be assumption of the driver, that the
operation is in the format as per the driver info. Ill change it in respin.

> 
> 
> >
> > Signed-off-by: Hemant Agrawal <hemant.agrawal at nxp.com>
> > Signed-off-by: Nipun Gupta <nipun.gupta at nxp.com>
> > ---
> >  doc/guides/bbdevs/features/default.ini |  1 +
> >  doc/guides/prog_guide/bbdev.rst        |  6 ++++++
> >  lib/bbdev/rte_bbdev_op.h               | 14 ++++++++++++--
> >  3 files changed, 19 insertions(+), 2 deletions(-)
> >
> > diff --git a/doc/guides/bbdevs/features/default.ini
> > b/doc/guides/bbdevs/features/default.ini
> > index 5fe267a625..ae5aacf8f7 100644
> > --- a/doc/guides/bbdevs/features/default.ini
> > +++ b/doc/guides/bbdevs/features/default.ini
> > @@ -14,3 +14,4 @@ LLR/HARQ Compression   =
> >  External DDR Access    =
> >  HW Accelerated         =
> >  BBDEV API              =
> > +Big Endian Processing  =
> > diff --git a/doc/guides/prog_guide/bbdev.rst
> > b/doc/guides/prog_guide/bbdev.rst index 9619280ffc..6540b514bb 100644
> > --- a/doc/guides/prog_guide/bbdev.rst
> > +++ b/doc/guides/prog_guide/bbdev.rst
> > @@ -747,6 +747,9 @@ given below.
> >  |RTE_BBDEV_LDPC_ENC_CONCATENATION                                    |
> >  | Set if a device supports concatenation of non byte aligned output  |  +------
> > --------------------------------------------------------------+
> > +|RTE_BBDEV_LDPC_ENC_BIG_ENDIAN                                       |
> > +| Set if a device supports Big Endian data processing                |
> > ++--------------------------------------------------------------------+
> >
> >  The structure passed for each LDPC encode operation is given below,  with
> > the operation flags forming a bitmask in the ``op_flags`` field.
> > @@ -942,6 +945,9 @@ given below.
> >  |RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK                        |
> >  | Set if a device supports loopback access to HARQ internal memory   |
> >  +--------------------------------------------------------------------+
> > +|RTE_BBDEV_LDPC_DEC_BIG_ENDIAN                                       |
> > +| Set if a device supports Big Endian data processing                |
> > ++--------------------------------------------------------------------+
> >
> >  The structure passed for each LDPC decode operation is given below,  with
> > the operation flags forming a bitmask in the ``op_flags`` field.
> > diff --git a/lib/bbdev/rte_bbdev_op.h b/lib/bbdev/rte_bbdev_op.h index
> > f946842727..9e9b5be81f 100644
> > --- a/lib/bbdev/rte_bbdev_op.h
> > +++ b/lib/bbdev/rte_bbdev_op.h
> > @@ -186,7 +186,12 @@ enum rte_bbdev_op_ldpcdec_flag_bitmasks {
> >  	 *  for HARQ memory. If not set, it is assumed the filler bits are not
> >  	 *  in HARQ memory and handled directly by the LDPC decoder.
> >  	 */
> > -	RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS = (1ULL <<
> > 18)
> > +	RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS = (1ULL <<
> > 18),
> > +	/** Set if a device supports Big Endian data processing.
> > +	 *  If not set Little Endian data processing is supported by
> > +	 *  default.
> > +	 */
> > +	RTE_BBDEV_LDPC_DEC_BIG_ENDIAN = (1ULL << 8)
> >  };
> >
> >  /** Flags for LDPC encoder operation and capability structure */ @@ -206,7
> > +211,12 @@ enum rte_bbdev_op_ldpcenc_flag_bitmasks {
> >  	/** Set if a device supports scatter-gather functionality. */
> >  	RTE_BBDEV_LDPC_ENC_SCATTER_GATHER = (1ULL << 6),
> >  	/** Set if a device supports concatenation of non byte aligned output
> > */
> > -	RTE_BBDEV_LDPC_ENC_CONCATENATION = (1ULL << 7)
> > +	RTE_BBDEV_LDPC_ENC_CONCATENATION = (1ULL << 7),
> > +	/** Set if a device supports Big Endian data processing
> > +	 *  If not set Little Endian data processing is supported by
> > +	 *  default.
> > +	 */
> > +	RTE_BBDEV_LDPC_ENC_BIG_ENDIAN = (1ULL << 8)
> >  };
> >
> >  /** Flags for the Code Block/Transport block mode  */
> > --
> > 2.17.1