[Patch v6 15/18] net/mana: add function to send packets
fengchengwen
fengchengwen at huawei.com
Fri Sep 2 14:18:49 CEST 2022
On 2022/8/31 6:51, longli at linuxonhyperv.com wrote:
> From: Long Li <longli at microsoft.com>
>
> With all the TX queues created, MANA can send packets over those queues.
>
> Signed-off-by: Long Li <longli at microsoft.com>
...
> }
> +
> +uint16_t mana_tx_burst(void *dpdk_txq, struct rte_mbuf **tx_pkts,
> + uint16_t nb_pkts)
> +{
> + struct mana_txq *txq = dpdk_txq;
> + struct mana_priv *priv = txq->priv;
> + struct gdma_comp comp;
> + int ret;
> + void *db_page;
> +
> + /* Process send completions from GDMA */
> + while (gdma_poll_completion_queue(&txq->gdma_cq, &comp) == 1) {
> + struct mana_txq_desc *desc =
> + &txq->desc_ring[txq->desc_ring_tail];
> + struct mana_tx_comp_oob *oob =
> + (struct mana_tx_comp_oob *)&comp.completion_data[0];
> +
> + if (oob->cqe_hdr.cqe_type != CQE_TX_OKAY) {
> + DRV_LOG(ERR,
> + "mana_tx_comp_oob cqe_type %u vendor_err %u",
> + oob->cqe_hdr.cqe_type, oob->cqe_hdr.vendor_err);
> + txq->stats.errors++;
> + } else {
> + DRV_LOG(DEBUG, "mana_tx_comp_oob CQE_TX_OKAY");
> + txq->stats.packets++;
> + }
> +
> + if (!desc->pkt) {
> + DRV_LOG(ERR, "mana_txq_desc has a NULL pkt");
> + } else {
> + txq->stats.bytes += desc->pkt->data_len;
> + rte_pktmbuf_free(desc->pkt);
> + }
> +
> + desc->pkt = NULL;
> + txq->desc_ring_tail = (txq->desc_ring_tail + 1) % txq->num_desc;
> + txq->gdma_sq.tail += desc->wqe_size_in_bu;
> + }
> +
> + /* Post send requests to GDMA */
> + uint16_t pkt_idx;
> +
> + for (pkt_idx = 0; pkt_idx < nb_pkts; pkt_idx++) {
> + struct rte_mbuf *m_pkt = tx_pkts[pkt_idx];
> + struct rte_mbuf *m_seg = m_pkt;
> + struct transmit_oob_v2 tx_oob = {0};
> + struct one_sgl sgl = {0};
> +
> + /* Drop the packet if it exceeds max segments */
> + if (m_pkt->nb_segs > priv->max_send_sge) {
> + DRV_LOG(ERR, "send packet segments %d exceeding max",
> + m_pkt->nb_segs);
This branch violate rte_eth_tx_burst definition, which defined the return value is " * The maximum number of packets to transmit."
Also I notice the driver didn't implement tx-prepare, which could hold such checking in framework's definition.
> + continue;
> + }
> +
> + /* Fill in the oob */
> + tx_oob.short_oob.packet_format = short_packet_format;
> + tx_oob.short_oob.tx_is_outer_ipv4 =
> + m_pkt->ol_flags & RTE_MBUF_F_TX_IPV4 ? 1 : 0;
> + tx_oob.short_oob.tx_is_outer_ipv6 =
> + m_pkt->ol_flags & RTE_MBUF_F_TX_IPV6 ? 1 : 0;
> +
> + tx_oob.short_oob.tx_compute_IP_header_checksum =
> + m_pkt->ol_flags & RTE_MBUF_F_TX_IP_CKSUM ? 1 : 0;
> +
> + if ((m_pkt->ol_flags & RTE_MBUF_F_TX_L4_MASK) ==
> + RTE_MBUF_F_TX_TCP_CKSUM) {
> + struct rte_tcp_hdr *tcp_hdr;
> +
> + /* HW needs partial TCP checksum */
> +
> + tcp_hdr = rte_pktmbuf_mtod_offset(m_pkt,
> + struct rte_tcp_hdr *,
> + m_pkt->l2_len + m_pkt->l3_len);
> +
> + if (m_pkt->ol_flags & RTE_MBUF_F_TX_IPV4) {
> + struct rte_ipv4_hdr *ip_hdr;
> +
> + ip_hdr = rte_pktmbuf_mtod_offset(m_pkt,
> + struct rte_ipv4_hdr *,
> + m_pkt->l2_len);
> + tcp_hdr->cksum = rte_ipv4_phdr_cksum(ip_hdr,
> + m_pkt->ol_flags);
> +
> + } else if (m_pkt->ol_flags & RTE_MBUF_F_TX_IPV6) {
> + struct rte_ipv6_hdr *ip_hdr;
> +
> + ip_hdr = rte_pktmbuf_mtod_offset(m_pkt,
> + struct rte_ipv6_hdr *,
> + m_pkt->l2_len);
> + tcp_hdr->cksum = rte_ipv6_phdr_cksum(ip_hdr,
> + m_pkt->ol_flags);
> + } else {
> + DRV_LOG(ERR, "Invalid input for TCP CKSUM");
> + }
> +
> + tx_oob.short_oob.tx_compute_TCP_checksum = 1;
> + tx_oob.short_oob.tx_transport_header_offset =
> + m_pkt->l2_len + m_pkt->l3_len;
> + }
> +
> + if ((m_pkt->ol_flags & RTE_MBUF_F_TX_L4_MASK) ==
> + RTE_MBUF_F_TX_UDP_CKSUM) {
> + struct rte_udp_hdr *udp_hdr;
> +
> + /* HW needs partial UDP checksum */
> + udp_hdr = rte_pktmbuf_mtod_offset(m_pkt,
> + struct rte_udp_hdr *,
> + m_pkt->l2_len + m_pkt->l3_len);
> +
> + if (m_pkt->ol_flags & RTE_MBUF_F_TX_IPV4) {
> + struct rte_ipv4_hdr *ip_hdr;
> +
> + ip_hdr = rte_pktmbuf_mtod_offset(m_pkt,
> + struct rte_ipv4_hdr *,
> + m_pkt->l2_len);
> +
> + udp_hdr->dgram_cksum =
> + rte_ipv4_phdr_cksum(ip_hdr,
> + m_pkt->ol_flags);
> +
> + } else if (m_pkt->ol_flags & RTE_MBUF_F_TX_IPV6) {
> + struct rte_ipv6_hdr *ip_hdr;
> +
> + ip_hdr = rte_pktmbuf_mtod_offset(m_pkt,
> + struct rte_ipv6_hdr *,
> + m_pkt->l2_len);
> +
> + udp_hdr->dgram_cksum =
> + rte_ipv6_phdr_cksum(ip_hdr,
> + m_pkt->ol_flags);
> +
> + } else {
> + DRV_LOG(ERR, "Invalid input for UDP CKSUM");
> + }
> +
> + tx_oob.short_oob.tx_compute_UDP_checksum = 1;
> + }
Why not have TSO process, which was reported support in dev_info_get ?
> +
> + tx_oob.short_oob.suppress_tx_CQE_generation = 0;
> + tx_oob.short_oob.VCQ_number = txq->gdma_cq.id;
> +
> + tx_oob.short_oob.VSQ_frame_num =
> + get_vsq_frame_num(txq->gdma_sq.id);
> + tx_oob.short_oob.short_vport_offset = txq->tx_vp_offset;
> +
> + DRV_LOG(DEBUG, "tx_oob packet_format %u ipv4 %u ipv6 %u",
> + tx_oob.short_oob.packet_format,
> + tx_oob.short_oob.tx_is_outer_ipv4,
> + tx_oob.short_oob.tx_is_outer_ipv6);
> +
> + DRV_LOG(DEBUG, "tx_oob checksum ip %u tcp %u udp %u offset %u",
> + tx_oob.short_oob.tx_compute_IP_header_checksum,
> + tx_oob.short_oob.tx_compute_TCP_checksum,
> + tx_oob.short_oob.tx_compute_UDP_checksum,
> + tx_oob.short_oob.tx_transport_header_offset);
> +
> + DRV_LOG(DEBUG, "pkt[%d]: buf_addr 0x%p, nb_segs %d, pkt_len %d",
> + pkt_idx, m_pkt->buf_addr, m_pkt->nb_segs,
> + m_pkt->pkt_len);
> +
> + /* Create SGL for packet data buffers */
> + for (uint16_t seg_idx = 0; seg_idx < m_pkt->nb_segs; seg_idx++) {
> + struct mana_mr_cache *mr =
> + mana_find_pmd_mr(&txq->mr_btree, priv, m_seg);
> +
> + if (!mr) {
> + DRV_LOG(ERR, "failed to get MR, pkt_idx %u",
> + pkt_idx);
> + return pkt_idx;
> + }
> +
> + sgl.gdma_sgl[seg_idx].address =
> + rte_cpu_to_le_64(rte_pktmbuf_mtod(m_seg,
> + uint64_t));
> + sgl.gdma_sgl[seg_idx].size = m_seg->data_len;
> + sgl.gdma_sgl[seg_idx].memory_key = mr->lkey;
> +
> + DRV_LOG(DEBUG,
> + "seg idx %u addr 0x%" PRIx64 " size %x key %x",
> + seg_idx, sgl.gdma_sgl[seg_idx].address,
> + sgl.gdma_sgl[seg_idx].size,
> + sgl.gdma_sgl[seg_idx].memory_key);
> +
> + m_seg = m_seg->next;
> + }
> +
> + struct gdma_work_request work_req = {0};
> + struct gdma_posted_wqe_info wqe_info = {0};
> +
> + work_req.gdma_header.struct_size = sizeof(work_req);
> + wqe_info.gdma_header.struct_size = sizeof(wqe_info);
> +
> + work_req.sgl = sgl.gdma_sgl;
> + work_req.num_sgl_elements = m_pkt->nb_segs;
> + work_req.inline_oob_size_in_bytes =
> + sizeof(struct transmit_short_oob_v2);
> + work_req.inline_oob_data = &tx_oob;
> + work_req.flags = 0;
> + work_req.client_data_unit = NOT_USING_CLIENT_DATA_UNIT;
> +
> + ret = gdma_post_work_request(&txq->gdma_sq, &work_req,
> + &wqe_info);
> + if (!ret) {
> + struct mana_txq_desc *desc =
> + &txq->desc_ring[txq->desc_ring_head];
> +
> + /* Update queue for tracking pending requests */
> + desc->pkt = m_pkt;
> + desc->wqe_size_in_bu = wqe_info.wqe_size_in_bu;
> + txq->desc_ring_head =
> + (txq->desc_ring_head + 1) % txq->num_desc;
> +
> + DRV_LOG(DEBUG, "nb_pkts %u pkt[%d] sent",
> + nb_pkts, pkt_idx);
> + } else {
> + DRV_LOG(INFO, "pkt[%d] failed to post send ret %d",
> + pkt_idx, ret);
> + break;
> + }
> + }
> +
> + /* Ring hardware door bell */
> + db_page = priv->db_page;
> + if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
> + struct rte_eth_dev *dev =
> + &rte_eth_devices[priv->dev_data->port_id];
> + struct mana_process_priv *process_priv = dev->process_private;
> +
> + db_page = process_priv->db_page;
> + }
> +
> + ret = mana_ring_doorbell(db_page, gdma_queue_send,
> + txq->gdma_sq.id,
> + txq->gdma_sq.head *
> + GDMA_WQE_ALIGNMENT_UNIT_SIZE);
> + if (ret)
> + DRV_LOG(ERR, "mana_ring_doorbell failed ret %d", ret);
> +
> + return pkt_idx;
> +}
>
More information about the dev
mailing list