[PATCH v2] net/axgbe: add multi-process support

[Jesna K E]

Added multi-process support for axgbe PMD
To achieve multi-process support separate out TX and RX function
inside the axgbe driver and call that from a secondary process
when it is attaching to an already-configured NIC

Signed-off-by: Jesna K E <jesna.k.e at amd.com>
---
 .mailmap                               |  1 +
 doc/guides/nics/features/axgbe.ini     |  1 +
 doc/guides/rel_notes/release_23_03.rst |  2 +
 drivers/net/axgbe/axgbe_ethdev.c       | 62 ++++++++++++++++++++------
 drivers/net/axgbe/axgbe_rxtx.c         | 11 -----
 drivers/net/axgbe/axgbe_rxtx.h         |  5 +++
 6 files changed, 57 insertions(+), 25 deletions(-)

diff --git a/.mailmap b/.mailmap
index 75884b6fe2..a153c9ab93 100644
--- a/.mailmap
+++ b/.mailmap
@@ -581,6 +581,7 @@ Jerome Jutteau <jerome.jutteau at outscale.com>
 Jerry Hao OS <jerryhao at os.amperecomputing.com>
 Jerry Lilijun <jerry.lilijun at huawei.com>
 Jerry Zhang <jerry.zhang at intel.com>
+Jesna K E <jesna.k.e at amd.com>
 Jesper Wramberg <jesper.wramberg at gmail.com>
 Jesse Brandeburg <jesse.brandeburg at intel.com>
 Jesse Bruni <jesse.bruni at intel.com>
diff --git a/doc/guides/nics/features/axgbe.ini b/doc/guides/nics/features/axgbe.ini
index 821bb682d4..5e2d6498e5 100644
--- a/doc/guides/nics/features/axgbe.ini
+++ b/doc/guides/nics/features/axgbe.ini
@@ -18,6 +18,7 @@ L3 checksum offload  = Y
 L4 checksum offload  = Y
 Basic stats          = Y
 FW version           = Y
+Multiprocess aware   = Y
 Linux                = Y
 x86-32               = Y
 x86-64               = Y
diff --git a/doc/guides/rel_notes/release_23_03.rst b/doc/guides/rel_notes/release_23_03.rst
index b8c5b68d6c..92ec1e4b88 100644
--- a/doc/guides/rel_notes/release_23_03.rst
+++ b/doc/guides/rel_notes/release_23_03.rst
@@ -55,6 +55,8 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added multi-process support for axgbe PMD.**
+
 
 Removed Items
 -------------
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index b071e4e460..48714eebe6 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -353,8 +353,6 @@ axgbe_dev_start(struct rte_eth_dev *dev)
 {
 	struct axgbe_port *pdata = dev->data->dev_private;
 	int ret;
-	struct rte_eth_dev_data *dev_data = dev->data;
-	uint16_t max_pkt_len;
 
 	dev->dev_ops = &axgbe_eth_dev_ops;
 
@@ -388,17 +386,8 @@ axgbe_dev_start(struct rte_eth_dev *dev)
 	rte_bit_relaxed_clear32(AXGBE_STOPPED, &pdata->dev_state);
 	rte_bit_relaxed_clear32(AXGBE_DOWN, &pdata->dev_state);
 
-	max_pkt_len = dev_data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
-	if ((dev_data->dev_conf.rxmode.offloads & RTE_ETH_RX_OFFLOAD_SCATTER) ||
-				max_pkt_len > pdata->rx_buf_size)
-		dev_data->scattered_rx = 1;
-
-	/*  Scatter Rx handling */
-	if (dev_data->scattered_rx)
-		dev->rx_pkt_burst = &eth_axgbe_recv_scattered_pkts;
-	else
-		dev->rx_pkt_burst = &axgbe_recv_pkts;
-
+	axgbe_set_rx_function(dev);
+	axgbe_set_tx_function(dev);
 	return 0;
 }
 
@@ -2145,6 +2134,45 @@ get_pci_rc_devid(void)
 	return (uint16_t)device_id;
 }
 
+/* Used in dev_start by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev.
+ */
+void
+axgbe_set_tx_function(struct rte_eth_dev *dev)
+{
+	struct axgbe_port *pdata = dev->data->dev_private;
+
+	if (pdata->multi_segs_tx)
+		dev->tx_pkt_burst = &axgbe_xmit_pkts_seg;
+#ifdef RTE_ARCH_X86
+	struct axgbe_tx_queue *txq = dev->data->tx_queues[0];
+	if (!txq->vector_disable &&
+			rte_vect_get_max_simd_bitwidth() >= RTE_VECT_SIMD_128)
+		dev->tx_pkt_burst = &axgbe_xmit_pkts_vec;
+#else
+	dev->tx_pkt_burst = &axgbe_xmit_pkts;
+#endif
+}
+
+void
+axgbe_set_rx_function(struct rte_eth_dev *dev)
+{
+	struct rte_eth_dev_data *dev_data = dev->data;
+	uint16_t max_pkt_len;
+	struct axgbe_port *pdata;
+
+	pdata = dev->data->dev_private;
+	max_pkt_len = dev_data->mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+	if ((dev_data->dev_conf.rxmode.offloads & RTE_ETH_RX_OFFLOAD_SCATTER) ||
+			max_pkt_len > pdata->rx_buf_size)
+		dev_data->scattered_rx = 1;
+	/*  Scatter Rx handling */
+	if (dev_data->scattered_rx)
+		dev->rx_pkt_burst = &eth_axgbe_recv_scattered_pkts;
+	else
+		dev->rx_pkt_burst = &axgbe_recv_pkts;
+}
+
 /*
  * It returns 0 on success.
  */
@@ -2163,12 +2191,18 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
 	eth_dev->rx_descriptor_status = axgbe_dev_rx_descriptor_status;
 	eth_dev->tx_descriptor_status = axgbe_dev_tx_descriptor_status;
 
+	eth_dev->tx_pkt_burst = &axgbe_xmit_pkts;
+	eth_dev->rx_pkt_burst = &axgbe_recv_pkts;
+
 	/*
 	 * For secondary processes, we don't initialise any further as primary
 	 * has already done this work.
 	 */
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+		axgbe_set_tx_function(eth_dev);
+		axgbe_set_rx_function(eth_dev);
 		return 0;
+	}
 
 	eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
 
diff --git a/drivers/net/axgbe/axgbe_rxtx.c b/drivers/net/axgbe/axgbe_rxtx.c
index 7cff79e030..9b283bd9d0 100644
--- a/drivers/net/axgbe/axgbe_rxtx.c
+++ b/drivers/net/axgbe/axgbe_rxtx.c
@@ -629,17 +629,6 @@ int axgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 				RTE_ETH_TX_OFFLOAD_MULTI_SEGS))
 		pdata->multi_segs_tx = true;
 
-	if (pdata->multi_segs_tx)
-		dev->tx_pkt_burst = &axgbe_xmit_pkts_seg;
-	else if (txq->vector_disable ||
-			rte_vect_get_max_simd_bitwidth() < RTE_VECT_SIMD_128)
-		dev->tx_pkt_burst = &axgbe_xmit_pkts;
-	else
-#ifdef RTE_ARCH_X86
-		dev->tx_pkt_burst = &axgbe_xmit_pkts_vec;
-#else
-		dev->tx_pkt_burst = &axgbe_xmit_pkts;
-#endif
 
 	return 0;
 }
diff --git a/drivers/net/axgbe/axgbe_rxtx.h b/drivers/net/axgbe/axgbe_rxtx.h
index eeef908ceb..1dceb76606 100644
--- a/drivers/net/axgbe/axgbe_rxtx.h
+++ b/drivers/net/axgbe/axgbe_rxtx.h
@@ -158,6 +158,11 @@ struct axgbe_tx_queue {
  * RX/TX function prototypes
  */
 
+/* Used in dev_start by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev.
+ */
+void axgbe_set_tx_function(struct rte_eth_dev *dev);
+void axgbe_set_rx_function(struct rte_eth_dev *dev);
 
 void axgbe_dev_tx_queue_release(struct rte_eth_dev *dev, uint16_t queue_idx);
 int  axgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
-- 
2.25.1