[2nd Try]:Re: Traffic Management API Questions

[Singh, Jasvinder]

Hi Venky,

Please see inline;

Jasvinder

From: Venky Venkatesh <vvenkatesh at paloaltonetworks.com>
Sent: Wednesday, January 11, 2023 11:56 AM
To: Singh, Jasvinder <jasvinder.singh at intel.com>
Cc: dev at dpdk.org
Subject: Re: [2nd Try]:Re: Traffic Management API Questions

Hi Jasvinder,
Thanks for the detailed answers. Our need is to have shaping at the port level as well. I am trying to see what would be the way to accomplish this given the current limitations of the sched library implementation in this regard. I see 2 options:

  *   The top level (i.e. port level) documentation says the following: "Output Ethernet port 1/10/40 GbE" and "Multiple ports are scheduled in round robin order with all ports having equal priority". Questions:

     *   Do all the ports have to be of the same speed OR can it be a heterogeneous set of port speeds?
[JS] – the library supports single port (root node) of the hierarchy. Each port can have multiple subports configured using different shaping rates. If you desire to have multiple ports, each port would have separate hierarchical tree underneath. Different ports could have different speed.
o If it can be a heterogeneous set of ports, is the scheduling across those ports weighted round robin as opposed to round robin?
[JS] – Scheduling across multiple ports is not supported in current sched library. At the application level, one can think of invoking enqueue/dequeue sched API in round robin or weighted round robin manner.

     *   Are Speeds other than  1/10/40 GbE not supported?
[JS] – Speeds other than above is supported, for eg. 25G, 50G etc.

     *   I suppose this heterogeneous mix of port speeds is implemented by playing with the weights across ports, correct?
[JS] -please see above answers

     *   If so, what problem do you foresee if we provide arbitrary bandwidth ports by regulating the above weights?
[JS] – I don’t see any issue.

  *   The other alternative would be to add another layer (which has a shaper)  to the hierarchy by mimicking one of the existing layers: how amenable is the current implementation to that?
Do either of the above look like workable ideas? Are there any other approaches where we could accomplish our requirement with minimal changes to the code logic?
[JS] – adding another layer will require considerable work in library. How about using multiple subports with different shaping bandwidth where each subport maintain #subcribers and send traffic out through single physical port (root node). It will need less effort and library supports multiple subports under single port (root node).


Thanks
-Venky

On Tue, Jan 10, 2023 at 2:54 AM Singh, Jasvinder <jasvinder.singh at intel.com<mailto:jasvinder.singh at intel.com>> wrote:
Hi Venky,

Please see inline.

Thanks,
Jasvinder


From: Venky Venkatesh <vvenkatesh at paloaltonetworks.com<mailto:vvenkatesh at paloaltonetworks.com>>
Sent: Tuesday, January 10, 2023 8:52 AM
To: dev at dpdk.org<mailto:dev at dpdk.org>
Subject: [2nd Try]:Re: Traffic Management API Questions

Hi,
Can someone pls get back on these
Thanks
-Venky

On Thu, Jan 5, 2023 at 4:07 AM Venky Venkatesh <vvenkatesh at paloaltonetworks.com<mailto:vvenkatesh at paloaltonetworks.com>> wrote:
Hi,
I was looking at the DPDK Traffic Management API. I wanted to clarify some things that I understand from the code (for software based TM implementation (at 20.11)) vs the documentation.
•         The documentation says "Traffic shaping: single/dual rate, private (per node) and shared (by multiple nodes) shapers" are supported. However it appears that the code supports only single rate shapers. Is my understanding correct?
[JS] – Yes, TM API supports single and dual rate shapers, privately per node as well as shared across multiple nodes. However, DPDK QoS scheduler library implements single rate shaper at nodes.
o    If not, pls point me to where dual rate shaping is supported in the software based TM implementation code.
o    However, if my understanding is correct, can the authors clarify the nature of issues they ran into in supporting dual rate (which thus prevented them from implementing it)?
[JS] – There isn’t any issue except more complexity. Author can rework the library to implement the dual rate shapers for the desired nodes depending upon the requirement.
•         The documentation comment above sounds like every node can have shapers. However it appears that the code does not support shaping at the port level. Again the same questions as above(regarding the accuracy of my understanding and if it is accurate, the reasons from the author for not supporting it)
[JS] – Implementation supports shapers at subport (group of pipes) and pipe level. The bandwidth available at the port level is distributed among the subports with the condition that aggregate bandwidth of subports should not exceed the port bandwidth. Each subport buffers and shape the traffic from the pipes depending upon the port bandwidth allocated to it. Implementation doesn’t support distribution of unused bandwidth of one subport to another subport. However, one can modify this behaviour if needed.
•         At the level of the TM API (and the associated software TM implementation) are there any restrictions on the number of levels of QoS hierarchy we can construct?
[JS] – TM API doesn’t restrict the number of QoS scheduler levels and generic enough to work with hierarchical schedulers with any number of levels. The current dpdk sched library implementation supports fixed 5 level scheduler hierarchy.
•         Lastly, does the QoS framework API (which I suppose is built on lower level building blocks including the TM API) expose the entire capabilities of the TM API (e.g. dual rate shapers, shapers at port level, > 4 levels of shaping etc.)? From the reading of the documentation it appears that there may be restrictions imposed by the QoS framework API on top of what TM API imposes. Can someone pls confirm this (and if so, the reason for doing so)?
[JS] – No, QoS framework API (DPDK sched library) presents only one flavour of hierarchical scheduler and doesn’t implements all the features exposed through TM API.  However, more features can be added to library and configured through TM API.

Thanks
-Venky

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/dev/attachments/20230111/9bad9b7b/attachment-0001.htm>