[PATCH v2 1/3] eventdev/eth_rx: add params set/get APIs

[Jerin Jacob]

On Tue, Jan 24, 2023 at 6:37 PM Naga Harish K, S V
<s.v.naga.harish.k at intel.com> wrote:
>
> Hi Jerin,
>
> > -----Original Message-----
> > From: Jerin Jacob <jerinjacobk at gmail.com>
> > Sent: Tuesday, January 24, 2023 10:00 AM
> > To: Naga Harish K, S V <s.v.naga.harish.k at intel.com>
> > Cc: jerinj at marvell.com; Carrillo, Erik G <erik.g.carrillo at intel.com>; Gujjar,
> > Abhinandan S <abhinandan.gujjar at intel.com>; dev at dpdk.org; Jayatheerthan,
> > Jay <jay.jayatheerthan at intel.com>
> > Subject: Re: [PATCH v2 1/3] eventdev/eth_rx: add params set/get APIs
> >
> > On Mon, Jan 23, 2023 at 11:35 PM Naga Harish K S V
> > <s.v.naga.harish.k at intel.com> wrote:
> > >
> > > The adapter configuration parameters defined in the ``struct
> > > rte_event_eth_rx_adapter_runtime_params`` can be configured and
> > > retrieved using ``rte_event_eth_rx_adapter_runtime_params_set`` and
> > > ``rte_event_eth_tx_adapter_runtime_params_get`` respectively.
> > >
> > > Signed-off-by: Naga Harish K S V <s.v.naga.harish.k at intel.com>
> >
> > > diff --git a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > > b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > > index 461eca566f..2207d6ffc3 100644
> > > --- a/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > > +++ b/doc/guides/prog_guide/event_ethernet_rx_adapter.rst
> > > @@ -185,6 +185,26 @@ flags for handling received packets, event queue
> > > identifier, scheduler type,  event priority, polling frequency of the
> > > receive queue and flow identifier  in struct
> > ``rte_event_eth_rx_adapter_queue_conf``.
> > >
> > > +Set/Get adapter runtime configuration parameters
> > > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > +
> > > +The runtime configuration parameters of adapter can be set/read using
> > > +``rte_event_eth_rx_adapter_runtime_params_set()`` and
> > > +``rte_event_eth_rx_adapter_runtime_params_get()`` respectively. The
> > > +parameters that can be set/read are defined in ``struct
> > rte_event_eth_rx_adapter_runtime_params``.
> >
> > Good.
> >
> > > +
> > > +``rte_event_eth_rx_adapter_create()`` or
> > > +``rte_event_eth_rx_adapter_create_with_params()`` configures the
> > > +adapter with default value for maximum packets processed per request to
> > 128.
> > > +``rte_event_eth_rx_adapter_runtime_params_set()`` function allows to
> > > +reconfigure maximum number of packets processed by adapter per
> > > +service request. This is alternative to configuring the maximum
> > > +packets processed per request by adapter by using
> > > +``rte_event_eth_rx_adapter_create_ext()`` with parameter
> > ``rte_event_eth_rx_adapter_conf::max_nb_rx``.
> >
> > This paragraph is not needed IMO. As it is specific to a driver, and we can keep
> > Doxygen comment only.
> >
> >
> > > +
> > > +``rte_event_eth_rx_adapter_runtime_parmas_get()`` function retrieves
> > > +the configuration parameters that are defined in ``struct
> > rte_event_eth_rx_adapter_runtime_params``.
> >
> > Good.
> >
> > > +
> > >  Getting and resetting Adapter queue stats
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > >
> > > diff --git a/lib/eventdev/rte_event_eth_rx_adapter.c
> > > b/lib/eventdev/rte_event_eth_rx_adapter.c
> > > index 34aa87379e..d8f3e750b7 100644
> > > --- a/lib/eventdev/rte_event_eth_rx_adapter.c
> > > +++ b/lib/eventdev/rte_event_eth_rx_adapter.c
> > > @@ -35,6 +35,8 @@
> > >  #define MAX_VECTOR_NS          1E9
> > >  #define MIN_VECTOR_NS          1E5
> > >
> > > +#define RXA_NB_RX_WORK_DEFAULT 128
> > > +
> > >  #define ETH_RX_ADAPTER_SERVICE_NAME_LEN        32
> > >  #define ETH_RX_ADAPTER_MEM_NAME_LEN    32
> > >
> > > @@ -1554,7 +1556,7 @@ rxa_default_conf_cb(uint8_t id, uint8_t dev_id,
> > >         }
> > >
> > >         conf->event_port_id = port_id;
> > > -       conf->max_nb_rx = 128;
> > > +       conf->max_nb_rx = RXA_NB_RX_WORK_DEFAULT;
> > >         if (started)
> > >                 ret = rte_event_dev_start(dev_id);
> > >         rx_adapter->default_cb_arg = 1; @@ -3436,6 +3438,90 @@
> > > rte_event_eth_rx_adapter_instance_get(uint16_t eth_dev_id,
> > >         return -EINVAL;
> > >  }
> >
> > > +
> > > +int
> > > +rte_event_eth_rx_adapter_runtime_params_set(uint8_t id,
> > > +               struct rte_event_eth_rx_adapter_runtime_params
> > > +*params) {
> > > +       struct event_eth_rx_adapter *rxa;
> > > +       int ret;
> > > +
> > > +       if (params == NULL)
> > > +               return -EINVAL;
> > > +
> > > +       if (rxa_memzone_lookup())
> > > +               return -ENOMEM;
> >
> > Introduce an adapter callback and move SW adapter related logic under callback
> > handler.
> >
> >
> Do you mean introducing eventdev PMD callback for HW implementation?

Yes.

> There are no adapter callback currently for service based SW Implementation.
>
> > > +
> > > +       rxa = rxa_id_to_adapter(id);
> > > +       if (rxa == NULL)
> > > +               return -EINVAL;
> > > +
> > > +       ret = rxa_caps_check(rxa);
> > > +       if (ret)
> > > +               return ret;
> > > +
> > > +       rte_spinlock_lock(&rxa->rx_lock);
> > > +       rxa->max_nb_rx = params->max_nb_rx;
> > > +       rte_spinlock_unlock(&rxa->rx_lock);
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +int
> > > +rte_event_eth_rx_adapter_runtime_params_get(uint8_t id,
> > > +               struct rte_event_eth_rx_adapter_runtime_params
> > > +*params) {
> > > +       struct event_eth_rx_adapter *rxa;
> > > +       int ret;
> > > +
> > > +       if (params == NULL)
> > > +               return -EINVAL;
> >
> >
> > Introduce an adapter callback and move SW adapter related logic under callback
> > handler.
> >
> >
>
> Same as above
>
> > > +
> > > +       if (rxa_memzone_lookup())
> > > +               return -ENOMEM;
> >  +
> > > +       rxa = rxa_id_to_adapter(id);
> > > +       if (rxa == NULL)
> > > +               return -EINVAL;
> > > +
> > > +       ret = rxa_caps_check(rxa);
> > > +       if (ret)
> > > +               return ret;
> > > +
> > > +       params->max_nb_rx = rxa->max_nb_rx;
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +/* RX-adapter telemetry callbacks */
> > >  #define RXA_ADD_DICT(stats, s) rte_tel_data_add_dict_u64(d, #s,
> > > stats.s)
> > >
> > >  static int
> > > diff --git a/lib/eventdev/rte_event_eth_rx_adapter.h
> > > b/lib/eventdev/rte_event_eth_rx_adapter.h
> > > index f4652f40e8..214ffd018c 100644
> > > --- a/lib/eventdev/rte_event_eth_rx_adapter.h
> > > +++ b/lib/eventdev/rte_event_eth_rx_adapter.h
> > > @@ -39,10 +39,21 @@
> > >   *  - rte_event_eth_rx_adapter_queue_stats_reset()
> > >   *  - rte_event_eth_rx_adapter_event_port_get()
> > >   *  - rte_event_eth_rx_adapter_instance_get()
> > > + *  - rte_event_eth_rx_adapter_runtime_params_get()
> > > + *  - rte_event_eth_rx_adapter_runtime_params_set()
> > >   *
> > >   * The application creates an ethernet to event adapter using
> > >   * rte_event_eth_rx_adapter_create_ext() or
> > rte_event_eth_rx_adapter_create()
> > >   * or rte_event_eth_rx_adapter_create_with_params() functions.
> > > + *
> > > + * rte_event_eth_rx_adapter_create() or
> > > + rte_event_eth_adapter_create_with_params()
> > > + * configures the adapter with default value of maximum packets
> > > + processed per
> > > + * iteration to RXA_NB_RX_WORK_DEFAULT(128).
> > > + * rte_event_eth_rx_adapter_runtime_params_set() allows to
> > > + re-configure maximum
> > > + * packets processed per iteration. This is alternative to using
> > > + * rte_event_eth_rx_adapter_create_ext() with parameter
> > > + * rte_event_eth_rx_adapter_conf::max_nb_rx
> >
> > Move this to Doxygen comment against max_nb_rx
> >
> > > + *
> > >   * The adapter needs to know which ethernet rx queues to poll for mbufs as
> > well
> > >   * as event device parameters such as the event queue identifier, event
> > >   * priority and scheduling type that the adapter should use when
> > > constructing @@ -299,6 +310,19 @@ struct
> > rte_event_eth_rx_adapter_params {
> > >         /**< flag to indicate that event buffer is separate for each
> > > queue */  };
> > >
> > > +/**
> > > + * Adapter configuration parameters
> > > + */
> > > +struct rte_event_eth_rx_adapter_runtime_params {
> > > +       uint32_t max_nb_rx;
> > > +       /**< The adapter can return early if it has processed at least
> > > +        * max_nb_rx mbufs. This isn't treated as a requirement; batching may
> > > +        * cause the adapter to process more than max_nb_rx mbufs.
> >
> > Also tell it is valid only for INTERNAL PORT capablity is set.
> >
>
> Do you mean, it is valid only for INTERNAL PORT capability is 'not' set?

Yes.

>
> > > +        */
> > > +       uint32_t rsvd[15];
> > > +       /**< Reserved fields for future use */
> >
> > Introduce rte_event_eth_rx_adapter_runtime_params_init() to make sure rsvd is
> > zero.
> >
>
> The reserved fields are not used by the adapter or application. Not sure Is it necessary to Introduce
> a new API to clear reserved fields.

When adapter starts using new fileds(when we add new fieds in future),
the old applicaiton which
is not using rte_event_eth_rx_adapter_runtime_params_init() may have
junk value and then adapter
implementation will behave bad.


>
> > > +};
> > > +
> > >  /**
> > >   *
> > >   * Callback function invoked by the SW adapter before it continues @@
> > > -377,7 +401,7 @@ int rte_event_eth_rx_adapter_create_ext(uint8_t id,
> > uint8_t dev_id,
> > >   * Create a new ethernet Rx event adapter with the specified identifier.
> > >   * This function uses an internal configuration function that creates an event
> > >   * port. This default function reconfigures the event device with an
> > > - * additional event port and setups up the event port using the
> > > port_config
> > > + * additional event port and setup the event port using the
> > > + port_config
> > >   * parameter passed into this function. In case the application needs more
> > >   * control in configuration of the service, it should use the
> > >   * rte_event_eth_rx_adapter_create_ext() version.
> > > @@ -743,6 +767,50 @@ rte_event_eth_rx_adapter_instance_get(uint16_t
> > eth_dev_id,
> > >                                       uint16_t rx_queue_id,
> > >                                       uint8_t *rxa_inst_id);
> > >