[RFC] ethdev: clarify device queue state after start and stop

Ferruh Yigit ferruh.yigit at amd.com
Sat Jul 22 00:57:23 CEST 2023


On 7/21/2023 6:33 PM, Ivan Malov wrote:
> Hi Ferruh,
> 
> The commit log says "commit [1]" and "commit [2]" but
> does not seem to provide the URLs for the [1] and [2].
> What are these resources? I'd like to know.
> 

Ahh, I missed to add them to commit log, will add to next version:

[1]
3c4426db54fc ("app/testpmd: do not poll stopped queues")

[2]
5028f207a4fa ("app/testpmd: fix secondary process packet forwarding")


> Thank you.
> 
> On Fri, 21 Jul 2023, Ferruh Yigit wrote:
> 
>> Drivers start/stop device queues on port start/stop, but not all drivers
>> update queue state accordingly.
>>
>> This becomes more visible if a specific queue stopped explicitly and
>> port stopped/started later, in this case although all queues are
>> started, the state of that specific queue is stopped and it is
>> misleading.
>>
>> Misrepresentation of queue state became a defect with commit [1] that
>> does forwarding decision based on queue state and commit [2] that gets
>> up to date queue state from ethdev/device before forwarding.
>>
>> This patch documents that status of all queues of a device should be
>> `RTE_ETH_QUEUE_STATE_STOPPED` after port stop and their status should
>> be`RTE_ETH_QUEUE_STATE_STARTED` after port start.
>>
>> Also an unit test added to verify drivers.
>>
>> Signed-off-by: Ferruh Yigit <ferruh.yigit at amd.com>
>> ---
>> Cc: Jie Hai <haijie1 at huawei.com>
>> Cc: Song Jiale <songx.jiale at intel.com>
>> Cc: Yuan Peng <yuan.peng at intel.com>
>> Cc: Raslan Darawsheh <rasland at nvidia.com>
>> Cc: Qiming Yang <qiming.yang at intel.com>
>> ---
>> app/test/meson.build       |   2 +
>> app/test/test_ethdev_api.c | 169 +++++++++++++++++++++++++++++++++++++
>> lib/ethdev/rte_ethdev.h    |   5 ++
>> 3 files changed, 176 insertions(+)
>> create mode 100644 app/test/test_ethdev_api.c
>>
>> diff --git a/app/test/meson.build b/app/test/meson.build
>> index b89cf0368fb5..8e409cf59c35 100644
>> --- a/app/test/meson.build
>> +++ b/app/test/meson.build
>> @@ -49,6 +49,7 @@ test_sources = files(
>>         'test_efd_perf.c',
>>         'test_errno.c',
>>         'test_ethdev_link.c',
>> +        'test_ethdev_api.c',
>>         'test_event_crypto_adapter.c',
>>         'test_event_eth_rx_adapter.c',
>>         'test_event_ring.c',
>> @@ -187,6 +188,7 @@ fast_tests = [
>>         ['eal_fs_autotest', true, true],
>>         ['errno_autotest', true, true],
>>         ['ethdev_link_status', true, true],
>> +        ['ethdev_api', true, true],
>>         ['event_ring_autotest', true, true],
>>         ['fib_autotest', true, true],
>>         ['fib6_autotest', true, true],
>> diff --git a/app/test/test_ethdev_api.c b/app/test/test_ethdev_api.c
>> new file mode 100644
>> index 000000000000..1b4569396dda
>> --- /dev/null
>> +++ b/app/test/test_ethdev_api.c
>> @@ -0,0 +1,169 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright (C) 2023, Advanced Micro Devices, Inc.
>> + */
>> +
>> +#include <rte_log.h>
>> +#include <rte_ethdev.h>
>> +
>> +#include <rte_test.h>
>> +#include "test.h"
>> +
>> +#define NUM_RXQ    2
>> +#define NUM_TXQ    2
>> +#define NUM_RXD 512
>> +#define NUM_TXD 512
>> +#define NUM_MBUF 1024
>> +#define MBUF_CACHE_SIZE 256
>> +
>> +static int32_t
>> +ethdev_api_queue_status(void)
>> +{
>> +    struct rte_eth_dev_info dev_info;
>> +    struct rte_eth_rxq_info rx_qinfo;
>> +    struct rte_eth_txq_info tx_qinfo;
>> +    struct rte_mempool *mbuf_pool;
>> +    /*struct rte_eth_rxconf rx_conf;*/
>> +    /*struct rte_eth_txconf tx_conf;*/
>> +    struct rte_eth_conf eth_conf;
>> +    uint16_t port_id;
>> +    int ret;
>> +
>> +    mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUF,
>> MBUF_CACHE_SIZE, 0,
>> +            RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
>> +
>> +    RTE_ETH_FOREACH_DEV(port_id) {
>> +        memset(&eth_conf, 0, sizeof(dev_info));
>> +        ret = rte_eth_dev_configure(port_id, NUM_RXQ, NUM_TXQ,
>> &eth_conf);
>> +        TEST_ASSERT(ret == 0,
>> +            "Port(%u) failed to configure.\n", port_id);
>> +
>> +        /* RxQ setup */
>> +        /*memset(&rx_conf, 0, sizeof(rx_conf));*/
>> +        for (uint16_t queue_id = 0; queue_id < NUM_RXQ; queue_id++) {
>> +            ret = rte_eth_rx_queue_setup(port_id, queue_id, NUM_RXD,
>> +                rte_socket_id(), NULL,  mbuf_pool);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to setup RxQ.\n",
>> +                port_id, queue_id);
>> +        }
>> +
>> +        /* TxQ setup */
>> +        /*memset(&tx_conf, 0, sizeof(tx_conf));*/
>> +        for (uint16_t queue_id = 0; queue_id < NUM_TXQ; queue_id++) {
>> +            ret = rte_eth_tx_queue_setup(port_id, queue_id, NUM_TXD,
>> +                rte_socket_id(), NULL);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to setup TxQ.\n",
>> +                port_id, queue_id);
>> +        }
>> +
>> +        ret = rte_eth_dev_info_get(port_id, &dev_info);
>> +        TEST_ASSERT(ret == 0,
>> +            "Port(%u) failed to get dev info.\n", port_id);
>> +
>> +        /* Initial RxQ */
>> +        for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues;
>> queue_id++) {
>> +            ret = rte_eth_rx_queue_info_get(port_id, queue_id,
>> &rx_qinfo);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to get RxQ info.\n",
>> +                port_id, queue_id);
>> +
>> +            TEST_ASSERT(rx_qinfo.queue_state ==
>> RTE_ETH_QUEUE_STATE_STOPPED,
>> +                "Wrong initial Rx queue(%u) state(%d)\n",
>> +                queue_id, rx_qinfo.queue_state);
>> +        }
>> +
>> +        /* Initial TxQ */
>> +        for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues;
>> queue_id++) {
>> +            ret = rte_eth_tx_queue_info_get(port_id, queue_id,
>> &tx_qinfo);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to get TxQ info.\n",
>> +                port_id, queue_id);
>> +
>> +            TEST_ASSERT(tx_qinfo.queue_state ==
>> RTE_ETH_QUEUE_STATE_STOPPED,
>> +                "Wrong initial Tx queue(%u) state(%d)\n",
>> +                queue_id, tx_qinfo.queue_state);
>> +        }
>> +
>> +
>> +        ret = rte_eth_dev_start(port_id);
>> +        TEST_ASSERT(ret == 0,
>> +            "Port(%u) failed to start.\n", port_id);
>> +
>> +        /* Started RxQ */
>> +        for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues;
>> queue_id++) {
>> +            ret = rte_eth_rx_queue_info_get(port_id, queue_id,
>> &rx_qinfo);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to get RxQ info.\n",
>> +                port_id, queue_id);
>> +
>> +            TEST_ASSERT(rx_qinfo.queue_state ==
>> RTE_ETH_QUEUE_STATE_STARTED,
>> +                "Wrong started Rx queue(%u) state(%d)\n",
>> +                queue_id, rx_qinfo.queue_state);
>> +        }
>> +
>> +        /* Started TxQ */
>> +        for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues;
>> queue_id++) {
>> +            ret = rte_eth_tx_queue_info_get(port_id, queue_id,
>> &tx_qinfo);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to get TxQ info.\n",
>> +                port_id, queue_id);
>> +
>> +            TEST_ASSERT(tx_qinfo.queue_state ==
>> RTE_ETH_QUEUE_STATE_STARTED,
>> +                "Wrong started Tx queue(%u) state(%d)\n",
>> +                queue_id, tx_qinfo.queue_state);
>> +        }
>> +
>> +
>> +        ret = rte_eth_dev_stop(port_id);
>> +        TEST_ASSERT(ret == 0,
>> +            "Port(%u) failed to stop.\n", port_id);
>> +
>> +        /* Stopped RxQ */
>> +        for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues;
>> queue_id++) {
>> +            ret = rte_eth_rx_queue_info_get(port_id, queue_id,
>> &rx_qinfo);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to get RxQ info.\n",
>> +                port_id, queue_id);
>> +
>> +            TEST_ASSERT(rx_qinfo.queue_state ==
>> RTE_ETH_QUEUE_STATE_STOPPED,
>> +                "Wrong stopped Rx queue(%u) state(%d)\n",
>> +                queue_id, rx_qinfo.queue_state);
>> +        }
>> +
>> +        /* Stopped TxQ */
>> +        for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues;
>> queue_id++) {
>> +            ret = rte_eth_tx_queue_info_get(port_id, queue_id,
>> &tx_qinfo);
>> +            TEST_ASSERT(ret == 0,
>> +                "Port(%u), queue(%u) failed to get TxQ info.\n",
>> +                port_id, queue_id);
>> +
>> +            TEST_ASSERT(tx_qinfo.queue_state ==
>> RTE_ETH_QUEUE_STATE_STOPPED,
>> +                "Wrong stopped Tx queue(%u) state(%d)\n",
>> +                queue_id, tx_qinfo.queue_state);
>> +        }
>> +    }
>> +
>> +    return TEST_SUCCESS;
>> +}
>> +
>> +static struct unit_test_suite ethdev_api_testsuite = {
>> +    .suite_name = "ethdev API tests",
>> +    .setup = NULL,
>> +    .teardown = NULL,
>> +    .unit_test_cases = {
>> +        TEST_CASE(ethdev_api_queue_status),
>> +        TEST_CASES_END() /**< NULL terminate unit test array */
>> +    }
>> +};
>> +
>> +static int
>> +test_ethdev_api(void)
>> +{
>> +    rte_log_set_global_level(RTE_LOG_DEBUG);
>> +    rte_log_set_level(RTE_LOGTYPE_EAL, RTE_LOG_DEBUG);
>> +
>> +    return unit_test_suite_runner(&ethdev_api_testsuite);
>> +}
>> +
>> +REGISTER_TEST_COMMAND(ethdev_api, test_ethdev_api);
>> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
>> index 3d44979b44f7..8f2e0f158cc4 100644
>> --- a/lib/ethdev/rte_ethdev.h
>> +++ b/lib/ethdev/rte_ethdev.h
>> @@ -2788,6 +2788,9 @@ int rte_eth_dev_tx_queue_stop(uint16_t port_id,
>> uint16_t tx_queue_id);
>>  * Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be
>> set before
>>  * PMD port start callback function is invoked.
>>  *
>> + * All device queues (except form deferred queues) status should be
>> + * `RTE_ETH_QUEUE_STATE_STARTED` after start.
>> + *
>>  * On success, all basic functions exported by the Ethernet API (link
>> status,
>>  * receive/transmit, and so on) can be invoked.
>>  *
>> @@ -2804,6 +2807,8 @@ int rte_eth_dev_start(uint16_t port_id);
>>  * Stop an Ethernet device. The device can be restarted with a call to
>>  * rte_eth_dev_start()
>>  *
>> + * All device queues status should be `RTE_ETH_QUEUE_STATE_STOPPED`
>> after stop.
>> + *
>>  * @param port_id
>>  *   The port identifier of the Ethernet device.
>>  * @return
>> -- 
>> 2.34.1
>>
>>



More information about the dev mailing list