[PATCH v2 2/2] net/hns3: add FDIR VLAN match mode runtime config

[Thomas Monjalon]

27/06/2023 09:11, Dongdong Liu:
> +- ``fdir_vlan_match_mode`` (default `strict`)
> +
> +  Used to select VLAN match mode. This runtime config can be `strict`
> +  or `nostrict` and is only valid for PF drives.

drives? Do you mean devices?

> +  If driver works on `strict` mode (default mode), hardware does strictly
> +  match the input flow base on VLAN number.
> +
> +  For the following scenarios with two rules:
> +
> +  .. code-block:: console
> +
> +    rule0:
> +      pattern: eth type is 0x0806
> +      actions: queue index 3
> +    rule1:
> +      pattern: eth type is 0x0806 / vlan vid is 20
> +      actions: queue index 4
> +
> +  If application select `strict` mode, only the ARP packets with VLAN
> +  20 are directed to queue 4, and the ARP packets with other VLAN ID
> +  cannot be directed to the specified queue. If application want to all
> +  ARP packets with or without VLAN to be directed to the specified queue,
> +  application can select `nostrict` mode and just need to set rule0.

As it is done in the rest of the document, you should use double backquotes
for values of the devargs.