[PATCH v2 2/2] net/hns3: add FDIR VLAN match mode runtime config

[Ferruh Yigit]

On 6/28/2023 3:59 AM, Dongdong Liu wrote:
> Hi Thomas
> 
> Many thanks for your review.
> 
> On 2023/6/28 7:12, Thomas Monjalon wrote:
>> 27/06/2023 09:11, Dongdong Liu:
>>> +- ``fdir_vlan_match_mode`` (default `strict`)
>>> +
>>> +  Used to select VLAN match mode. This runtime config can be `strict`
>>> +  or `nostrict` and is only valid for PF drives.
>>
>> drives? Do you mean devices?
> for PF devices, will fix.
>>
>>> +  If driver works on `strict` mode (default mode), hardware does
>>> strictly
>>> +  match the input flow base on VLAN number.
>>> +
>>> +  For the following scenarios with two rules:
>>> +
>>> +  .. code-block:: console
>>> +
>>> +    rule0:
>>> +      pattern: eth type is 0x0806
>>> +      actions: queue index 3
>>> +    rule1:
>>> +      pattern: eth type is 0x0806 / vlan vid is 20
>>> +      actions: queue index 4
>>> +
>>> +  If application select `strict` mode, only the ARP packets with VLAN
>>> +  20 are directed to queue 4, and the ARP packets with other VLAN ID
>>> +  cannot be directed to the specified queue. If application want to all
>>> +  ARP packets with or without VLAN to be directed to the specified
>>> queue,
>>> +  application can select `nostrict` mode and just need to set rule0.
>>
>> As it is done in the rest of the document, you should use double
>> backquotes
>> for values of the devargs.
> Good point, will fix.
> 

I dropped set from next-net, please send a new version with fix.
Updating patchwork status as "Change Requested".