[EXT] [PATCH v4 10/12] eventdev: clarify docs on event object fields and op types
Pavan Nikhilesh Bhagavatula
pbhagavatula at marvell.com
Mon Feb 26 07:52:33 CET 2024
> Clarify the meaning of the NEW, FORWARD and RELEASE event types.
> For the fields in "rte_event" struct, enhance the comments on each to
> clarify the field's use, and whether it is preserved between enqueue and
> dequeue, and it's role, if any, in scheduling.
>
> Signed-off-by: Bruce Richardson <bruce.richardson at intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula at marvell.com>
> ---
> V4: reworked following review by Jerin
> V3: updates following review
> ---
> lib/eventdev/rte_eventdev.h | 161 +++++++++++++++++++++++++-----------
> 1 file changed, 111 insertions(+), 50 deletions(-)
>
> diff --git a/lib/eventdev/rte_eventdev.h b/lib/eventdev/rte_eventdev.h
> index 6d881bd665..7e7e275620 100644
> --- a/lib/eventdev/rte_eventdev.h
> +++ b/lib/eventdev/rte_eventdev.h
> @@ -1515,47 +1515,55 @@ struct rte_event_vector {
>
> /* Event enqueue operations */
> #define RTE_EVENT_OP_NEW 0
> -/**< The event producers use this operation to inject a new event to the
> - * event device.
> +/**< The @ref rte_event.op field must be set to this operation type to inject a
> new event,
> + * i.e. one not previously dequeued, into the event device, to be scheduled
> + * for processing.
> */
> #define RTE_EVENT_OP_FORWARD 1
> -/**< The CPU use this operation to forward the event to different event
> queue or
> - * change to new application specific flow or schedule type to enable
> - * pipelining.
> +/**< The application must set the @ref rte_event.op field to this operation
> type to return a
> + * previously dequeued event to the event device to be scheduled for further
> processing.
> *
> - * This operation must only be enqueued to the same port that the
> + * This event *must* be enqueued to the same port that the
> * event to be forwarded was dequeued from.
> + *
> + * The event's fields, including (but not limited to) flow_id, scheduling type,
> + * destination queue, and event payload e.g. mbuf pointer, may all be
> updated as
> + * desired by the application, but the @ref rte_event.impl_opaque field must
> + * be kept to the same value as was present when the event was dequeued.
> */
> #define RTE_EVENT_OP_RELEASE 2
> /**< Release the flow context associated with the schedule type.
> *
> - * If current flow's scheduler type method is *RTE_SCHED_TYPE_ATOMIC*
> - * then this function hints the scheduler that the user has completed critical
> - * section processing in the current atomic context.
> - * The scheduler is now allowed to schedule events from the same flow from
> - * an event queue to another port. However, the context may be still held
> - * until the next rte_event_dequeue_burst() call, this call allows but does not
> - * force the scheduler to release the context early.
> - *
> - * Early atomic context release may increase parallelism and thus system
> + * If current flow's scheduler type method is @ref RTE_SCHED_TYPE_ATOMIC
> + * then this operation type hints the scheduler that the user has completed
> critical
> + * section processing for this event in the current atomic context, and that the
> + * scheduler may unlock any atomic locks held for this event.
> + * If this is the last event from an atomic flow, i.e. all flow locks are released
> + * (see @ref RTE_SCHED_TYPE_ATOMIC for details), the scheduler is now
> allowed to
> + * schedule events from that flow from to another port.
> + * However, the atomic locks may be still held until the next
> rte_event_dequeue_burst()
> + * call; enqueuing an event with opt type @ref RTE_EVENT_OP_RELEASE is a
> hint only,
> + * allowing the scheduler to release the atomic locks early, but not requiring it
> to do so.
> + *
> + * Early atomic lock release may increase parallelism and thus system
> * performance, but the user needs to design carefully the split into critical
> * vs non-critical sections.
> *
> - * If current flow's scheduler type method is *RTE_SCHED_TYPE_ORDERED*
> - * then this function hints the scheduler that the user has done all that need
> - * to maintain event order in the current ordered context.
> - * The scheduler is allowed to release the ordered context of this port and
> - * avoid reordering any following enqueues.
> - *
> - * Early ordered context release may increase parallelism and thus system
> - * performance.
> + * If current flow's scheduler type method is @ref
> RTE_SCHED_TYPE_ORDERED
> + * then this operation type informs the scheduler that the current event has
> + * completed processing and will not be returned to the scheduler, i.e.
> + * it has been dropped, and so the reordering context for that event
> + * should be considered filled.
> *
> - * If current flow's scheduler type method is *RTE_SCHED_TYPE_PARALLEL*
> - * or no scheduling context is held then this function may be an NOOP,
> - * depending on the implementation.
> + * Events with this operation type must only be enqueued to the same port
> that the
> + * event to be released was dequeued from. The @ref
> rte_event.impl_opaque
> + * field in the release event must have the same value as that in the original
> dequeued event.
> *
> - * This operation must only be enqueued to the same port that the
> - * event to be released was dequeued from.
> + * If a dequeued event is re-enqueued with operation type of @ref
> RTE_EVENT_OP_RELEASE,
> + * then any subsequent enqueue of that event - or a copy of it - must be
> done as event of type
> + * @ref RTE_EVENT_OP_NEW, not @ref RTE_EVENT_OP_FORWARD. This is
> because any context for
> + * the originally dequeued event, i.e. atomic locks, or reorder buffer entries,
> will have
> + * been removed or invalidated by the release operation.
> */
>
> /**
> @@ -1569,56 +1577,109 @@ struct rte_event {
> /** Event attributes for dequeue or enqueue operation */
> struct {
> uint32_t flow_id:20;
> - /**< Targeted flow identifier for the enqueue and
> - * dequeue operation.
> - * The value must be in the range of
> - * [0, nb_event_queue_flows - 1] which
> - * previously supplied to rte_event_dev_configure().
> + /**< Target flow identifier for the enqueue and
> dequeue operation.
> + *
> + * For @ref RTE_SCHED_TYPE_ATOMIC, this field is
> used to identify a
> + * flow for atomicity within a queue & priority level,
> such that events
> + * from each individual flow will only be scheduled to
> one port at a time.
> + *
> + * This field is preserved between enqueue and
> dequeue when
> + * a device reports the @ref
> RTE_EVENT_DEV_CAP_CARRY_FLOW_ID
> + * capability. Otherwise the value is implementation
> dependent
> + * on dequeue.
> */
> uint32_t sub_event_type:8;
> /**< Sub-event types based on the event source.
> + *
> + * This field is preserved between enqueue and
> dequeue.
> + *
> * @see RTE_EVENT_TYPE_CPU
> */
> uint32_t event_type:4;
> - /**< Event type to classify the event source.
> - * @see RTE_EVENT_TYPE_ETHDEV,
> (RTE_EVENT_TYPE_*)
> + /**< Event type to classify the event source.
> (RTE_EVENT_TYPE_*)
> + *
> + * This field is preserved between enqueue and
> dequeue
> */
> uint8_t op:2;
> - /**< The type of event enqueue operation -
> new/forward/
> - * etc.This field is not preserved across an instance
> - * and is undefined on dequeue.
> - * @see RTE_EVENT_OP_NEW, (RTE_EVENT_OP_*)
> + /**< The type of event enqueue operation -
> new/forward/ etc.
> + *
> + * This field is *not* preserved across an instance
> + * and is implementation dependent on dequeue.
> + *
> + * @see RTE_EVENT_OP_NEW
> + * @see RTE_EVENT_OP_FORWARD
> + * @see RTE_EVENT_OP_RELEASE
> */
> uint8_t rsvd:4;
> - /**< Reserved for future use */
> + /**< Reserved for future use.
> + *
> + * Should be set to zero when initializing event
> structures.
> + *
> + * When forwarding or releasing existing events
> dequeued from the scheduler,
> + * this field can be ignored.
> + */
> uint8_t sched_type:2;
> /**< Scheduler synchronization type
> (RTE_SCHED_TYPE_*)
> * associated with flow id on a given event queue
> * for the enqueue and dequeue operation.
> + *
> + * This field is used to determine the scheduling type
> + * for events sent to queues where @ref
> RTE_EVENT_QUEUE_CFG_ALL_TYPES
> + * is configured.
> + * For queues where only a single scheduling type is
> available,
> + * this field must be set to match the configured
> scheduling type.
> + *
> + * This field is preserved between enqueue and
> dequeue.
> + *
> + * @see RTE_SCHED_TYPE_ORDERED
> + * @see RTE_SCHED_TYPE_ATOMIC
> + * @see RTE_SCHED_TYPE_PARALLEL
> */
> uint8_t queue_id;
> /**< Targeted event queue identifier for the enqueue
> or
> * dequeue operation.
> - * The value must be in the range of
> - * [0, nb_event_queues - 1] which previously supplied
> to
> - * rte_event_dev_configure().
> + * The value must be less than @ref
> rte_event_dev_config.nb_event_queues
> + * which was previously supplied to
> rte_event_dev_configure().
> + *
> + * This field is preserved between enqueue on
> dequeue.
> */
> uint8_t priority;
> /**< Event priority relative to other events in the
> * event queue. The requested priority should in the
> - * range of [RTE_EVENT_DEV_PRIORITY_HIGHEST,
> - * RTE_EVENT_DEV_PRIORITY_LOWEST].
> + * range of [@ref
> RTE_EVENT_DEV_PRIORITY_HIGHEST,
> + * @ref RTE_EVENT_DEV_PRIORITY_LOWEST].
> + *
> * The implementation shall normalize the requested
> * priority to supported priority value.
> - * Valid when the device has
> - * RTE_EVENT_DEV_CAP_EVENT_QOS capability.
> + * [For devices with where the supported priority
> range is a power-of-2, the
> + * normalization will be done via bit-shifting, so only
> the highest
> + * log2(num_priorities) bits will be used by the event
> device]
> + *
> + * Valid when the device has @ref
> RTE_EVENT_DEV_CAP_EVENT_QOS capability
> + * and this field is preserved between enqueue and
> dequeue,
> + * though with possible loss of precision due to
> normalization and
> + * subsequent de-normalization. (For example, if a
> device only supports 8
> + * priority levels, only the high 3 bits of this field will be
> + * used by that device, and hence only the value of
> those 3 bits are
> + * guaranteed to be preserved between enqueue and
> dequeue.)
> + *
> + * Ignored when device does not support @ref
> RTE_EVENT_DEV_CAP_EVENT_QOS
> + * capability, and it is implementation dependent if this
> field is preserved
> + * between enqueue and dequeue.
> */
> uint8_t impl_opaque;
> - /**< Implementation specific opaque value.
> - * An implementation may use this field to hold
> + /**< Opaque field for event device use.
> + *
> + * An event driver implementation may use this field
> to hold an
> * implementation specific value to share between
> * dequeue and enqueue operation.
> - * The application should not modify this field.
> + *
> + * The application must not modify this field.
> + * Its value is implementation dependent on dequeue,
> + * and must be returned unmodified on enqueue
> when
> + * op type is @ref RTE_EVENT_OP_FORWARD or @ref
> RTE_EVENT_OP_RELEASE.
> + * This field is ignored on events with op type
> + * @ref RTE_EVENT_OP_NEW.
> */
> };
> };
> --
> 2.40.1
More information about the dev
mailing list