[PATCH 1/4] dts: constrain DPDK source flag

[Juraj Linkeš]

On Mon, Jan 22, 2024 at 7:26 PM Luca Vizzarro <luca.vizzarro at arm.com> wrote:
>
> DTS needs an input to gather the DPDK source code from. This is then
> built on the remote target. This commit makes sure that this input is
> more constrained, separating the Git revision ID – used to create a
> tarball using Git – and providing tarballed source code directly, while
> retaining mutual exclusion.
>

I didn't see the mutual exclusion being enforced in the code. From
what I can tell, I could pass both --tarball FILEPATH and --revision
and the former would be used without checking the latter.

> This makes the code more readable and easier to handle for input
> validation, of which this commit introduces a basic one based on the
> pre-existing code.
>

I wanted to have just one argument for basically the same thing, but
the input is pretty different so a two argument solution actually
sounds better.

> Moreover it ensures that these flags are explicitly required to be set
> by the user, dropping a default value. It also aids the user understand
> how to use the DTS in the scenario it is ran without any arguments set.
>
> Reviewed-by: Paul Szczepanek <paul.szczepanek at arm.com>
> Signed-off-by: Luca Vizzarro <luca.vizzarro at arm.com>
> ---
>  doc/guides/tools/dts.rst  |  8 +++--
>  dts/framework/settings.py | 64 ++++++++++++++++++++++++++++-----------
>  dts/framework/utils.py    | 43 ++++++++++++++++----------
>  3 files changed, 79 insertions(+), 36 deletions(-)
>
> diff --git a/doc/guides/tools/dts.rst b/doc/guides/tools/dts.rst
> index 846696e14e..6e2da317e8 100644
> --- a/doc/guides/tools/dts.rst
> +++ b/doc/guides/tools/dts.rst
> @@ -215,12 +215,16 @@ DTS is run with ``main.py`` located in the ``dts`` directory after entering Poet
>  .. code-block:: console
>
>     (dts-py3.10) $ ./main.py --help
> -   usage: main.py [-h] [--config-file CONFIG_FILE] [--output-dir OUTPUT_DIR] [-t TIMEOUT] [-v] [-s] [--tarball TARBALL] [--compile-timeout COMPILE_TIMEOUT] [--test-cases TEST_CASES] [--re-run RE_RUN]
> +   usage: main.py [-h] (--tarball FILEPATH | --revision ID) [--config-file CONFIG_FILE] [--output-dir OUTPUT_DIR] [-t TIMEOUT] [-v] [-s] [--compile-timeout COMPILE_TIMEOUT] [--test-cases TEST_CASES] [--re-run RE_RUN]
>
>     Run DPDK test suites. All options may be specified with the environment variables provided in brackets. Command line arguments have higher priority.
>
>     options:
>     -h, --help            show this help message and exit
> +   --tarball FILEPATH, --snapshot FILEPATH
> +                         Path to DPDK source code tarball to test. (default: None)
> +   --revision ID, --rev ID, --git-ref ID
> +                         Git revision ID to test. Could be commit, tag, tree ID and vice versa. To test local changes, first commit them, then use their commit ID (default: None)
>     --config-file CONFIG_FILE
>                           [DTS_CFG_FILE] configuration file that describes the test cases, SUTs and targets. (default: ./conf.yaml)
>     --output-dir OUTPUT_DIR, --output OUTPUT_DIR
> @@ -229,8 +233,6 @@ DTS is run with ``main.py`` located in the ``dts`` directory after entering Poet
>                           [DTS_TIMEOUT] The default timeout for all DTS operations except for compiling DPDK. (default: 15)
>     -v, --verbose         [DTS_VERBOSE] Specify to enable verbose output, logging all messages to the console. (default: False)
>     -s, --skip-setup      [DTS_SKIP_SETUP] Specify to skip all setup steps on SUT and TG nodes. (default: None)
> -   --tarball TARBALL, --snapshot TARBALL, --git-ref TARBALL
> -                         [DTS_DPDK_TARBALL] Path to DPDK source code tarball or a git commit ID, tag ID or tree ID to test. To test local changes, first commit them, then use the commit ID with this option. (default: dpdk.tar.xz)
>     --compile-timeout COMPILE_TIMEOUT
>                           [DTS_COMPILE_TIMEOUT] The timeout for compiling DPDK. (default: 1200)
>     --test-cases TEST_CASES
> diff --git a/dts/framework/settings.py b/dts/framework/settings.py
> index 609c8d0e62..2d0365e763 100644
> --- a/dts/framework/settings.py
> +++ b/dts/framework/settings.py
> @@ -76,7 +76,8 @@
>  from pathlib import Path
>  from typing import Any, TypeVar
>
> -from .utils import DPDKGitTarball
> +from .exception import ConfigurationError
> +from .utils import DPDKGitTarball, get_commit_id
>
>  _T = TypeVar("_T")
>
> @@ -149,6 +150,26 @@ def __call__(
>      return _EnvironmentArgument
>
>
> +def _parse_tarball(filepath: str) -> Path:
> +    """Validate if the filepath is valid and return a Path object."""

whether `filepath` is valid

Even though private methods don't get included in the API docs, I like
to be consistent. In this case, it doesn't really detract (but maybe
some disability would prove this wrong) while adding a bit (the fact
that we're referencing the argument).

I think the name should either be _validate_tarball or
_parse_tarball_path. The argument name is two words, so let's put an
underscore between them.

> +    path = Path(filepath)
> +    if not path.exists() or not path.is_file():
> +        raise argparse.ArgumentTypeError(
> +            "the file path provided is not a valid file")

Typo: capital T

> +    return path
> +
> +
> +def _parse_revision_id(rev_id: str) -> str:
> +    """Retrieve effective commit ID from a revision ID. While validating it."""

I think this would read better as one sentence.

> +
> +    try:
> +        return get_commit_id(rev_id)
> +    except ConfigurationError:
> +        raise argparse.ArgumentTypeError(
> +            "the Git revision ID supplied is invalid or ambiguous"
> +        )
> +
> +
>  @dataclass(slots=True)
>  class Settings:
>      """Default framework-wide user settings.
> @@ -167,7 +188,7 @@ class Settings:
>      #:
>      skip_setup: bool = False
>      #:
> -    dpdk_tarball_path: Path | str = "dpdk.tar.xz"
> +    dpdk_tarball_path: Path | str = ""
>      #:
>      compile_timeout: float = 1200
>      #:
> @@ -186,6 +207,28 @@ def _get_parser() -> argparse.ArgumentParser:
>          formatter_class=argparse.ArgumentDefaultsHelpFormatter,
>      )
>
> +    dpdk_source = parser.add_mutually_exclusive_group(required=True)
> +
> +    dpdk_source.add_argument(
> +        "--tarball",
> +        "--snapshot",
> +        action='store',
> +        type=_parse_tarball,
> +        help="Path to DPDK source code tarball to test.",
> +        metavar="FILEPATH",
> +    )
> +
> +    dpdk_source.add_argument(
> +        "--revision",
> +        "--rev",
> +        "--git-ref",
> +        type=_parse_revision_id,
> +        metavar="ID",

Since this is a patch with improvements, maybe we could add metavars
to other arguments as well. It looks pretty good.

> +        help="Git revision ID to test. Could be commit, tag, tree ID and "
> +        "vice versa. To test local changes, first commit them, then use their "
> +        "commit ID",
> +    )
> +

This removes the support for environment variables. It's possible we
don't want the support for these two arguments. Maybe we don't need
the support for variables at all. I'm leaning towards supporting the
env variables, but we probably should refactor how they're done. The
easiest would be to not do them with action, but just modifying the
default value if set. That would be a worthwhile improvement.

>      parser.add_argument(
>          "--config-file",
>          action=_env_arg("DTS_CFG_FILE"),
> @@ -229,18 +272,6 @@ def _get_parser() -> argparse.ArgumentParser:
>          help="[DTS_SKIP_SETUP] Specify to skip all setup steps on SUT and TG nodes.",
>      )
>
> -    parser.add_argument(
> -        "--tarball",
> -        "--snapshot",
> -        "--git-ref",
> -        action=_env_arg("DTS_DPDK_TARBALL"),
> -        default=SETTINGS.dpdk_tarball_path,
> -        type=Path,
> -        help="[DTS_DPDK_TARBALL] Path to DPDK source code tarball or a git commit ID, "
> -        "tag ID or tree ID to test. To test local changes, first commit them, "
> -        "then use the commit ID with this option.",
> -    )
> -
>      parser.add_argument(
>          "--compile-timeout",
>          action=_env_arg("DTS_COMPILE_TIMEOUT"),
> @@ -283,9 +314,8 @@ def get_settings() -> Settings:
>          verbose=parsed_args.verbose,
>          skip_setup=parsed_args.skip_setup,
>          dpdk_tarball_path=Path(
> -            Path(DPDKGitTarball(parsed_args.tarball, parsed_args.output_dir))
> -            if not os.path.exists(parsed_args.tarball)
> -            else Path(parsed_args.tarball)
> +            parsed_args.tarball or
> +            DPDKGitTarball(parsed_args.revision, parsed_args.output_dir)
>          ),
>          compile_timeout=parsed_args.compile_timeout,
>          test_cases=(parsed_args.test_cases.split(",") if parsed_args.test_cases else []),
> diff --git a/dts/framework/utils.py b/dts/framework/utils.py
> index cc5e458cc8..dbbec8b00a 100644
> --- a/dts/framework/utils.py
> +++ b/dts/framework/utils.py
> @@ -70,6 +70,32 @@ def get_packet_summaries(packets: list[Packet]) -> str:
>      return f"Packet contents: \n{packet_summaries}"
>
>
> +def get_commit_id(rev_id: str) -> str:
> +    """Given a Git revision ID, return the corresponding commit ID.
> +
> +    Args:
> +        rev_id: The Git revision ID.
> +
> +    Raises:
> +        ConfigurationError: The ``git rev-parse`` command failed. Suggesting
> +            an invalid or ambiguous revision ID was supplied.

This would also probably read better as one sentence.

> +    """
> +    result = subprocess.run(
> +        ["git", "rev-parse", "--verify", rev_id],
> +        text=True,
> +        capture_output=True,
> +    )
> +    if result.returncode != 0:
> +        raise ConfigurationError(
> +            f"{rev_id} is neither a path to an existing DPDK "
> +            "archive nor a valid git reference.\n"
> +            f"Command: {result.args}\n"
> +            f"Stdout: {result.stdout}\n"
> +            f"Stderr: {result.stderr}"
> +        )

We shuffled the order of operations a bit and now the error message
doesn't correspond.

> +    return result.stdout.strip()
> +
> +
>  class StrEnum(Enum):
>      """Enum with members stored as strings."""
>
> @@ -170,7 +196,6 @@ def __init__(
>
>          self._tarball_dir = Path(output_dir, "tarball")
>
> -        self._get_commit_id()

Makes sense to move this outside.

>          self._create_tarball_dir()
>
>          self._tarball_name = (
> @@ -180,21 +205,7 @@ def __init__(
>          if not self._tarball_path:
>              self._create_tarball()
>
> -    def _get_commit_id(self) -> None:
> -        result = subprocess.run(
> -            ["git", "rev-parse", "--verify", self._git_ref],
> -            text=True,
> -            capture_output=True,
> -        )
> -        if result.returncode != 0:
> -            raise ConfigurationError(
> -                f"{self._git_ref} is neither a path to an existing DPDK "
> -                "archive nor a valid git reference.\n"
> -                f"Command: {result.args}\n"
> -                f"Stdout: {result.stdout}\n"
> -                f"Stderr: {result.stderr}"
> -            )
> -        self._git_ref = result.stdout.strip()
> +
>
>      def _create_tarball_dir(self) -> None:
>          os.makedirs(self._tarball_dir, exist_ok=True)
> --
> 2.34.1
>