[dts] [PATCH] l3fwd/testpmd performance: optimize command delete some useless configure.
Liu, Yong
yong.liu at intel.com
Fri Apr 29 20:01:30 CEST 2016
Thanks, applied.
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Ding Heng
> Sent: Monday, April 25, 2016 2:06 AM
> To: dts at dpdk.org
> Cc: Ding, HengX
> Subject: [dts] [PATCH] l3fwd/testpmd performance: optimize command delete
> some useless configure.
>
> l3fwd: comment 2 cases no need to run in nightly performance test. Fix
> issues
> for run rfc2544 case with different nic. Add 72 byte for performance test.
>
> testpmd: change report format for generate nightly performance test. Use
> core
> mask instead of all cores for performance test. Optimize command for
> performance test.
>
>
> Signed-off-by: Ding Heng <hengx.ding at intel.com>
>
> diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
> index 0376a76..f6fce26 100644
> --- a/tests/TestSuite_l3fwd.py
> +++ b/tests/TestSuite_l3fwd.py
> @@ -50,7 +50,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
> test_cases_2_ports = [(1,"1S/1C/1T","%s -c %s -n %d -- -P -p %s --
> config '(P0,0,C{1.1.0}), (P1,0,C{1.1.0})'"),
> #"1S/1C/2T": "%s -c %s -n %d -- -p %s --config
> '(P0,0,C{1.1.0}), (P1,0,C{1.1.1})'",
> (1,"1S/2C/1T","%s -c %s -n %d -- -P -p %s --
> config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0})'"),
> - #"1S/4C/1T": "%s -c %s -n %d -- -p %s --config
> '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}),(P0,1,C{1.3.0}), (P1,1,C{1.4.0})'",
> + (1,"1S/4C/1T", "%s -c %s -n %d -- -p %s --
> config '(P0,0,C{1.1.0}), (P1,0,C{1.2.0}),(P0,1,C{1.3.0}),
> (P1,1,C{1.4.0})'"),
> #"2S/2C/1T": "%s -c %s -n %d -- -p %s --config
> '(P0,0,C{0.1.0}), (P1,0,C{0.2.0}),(P0,1,C{1.3.0}), (P1,1,C{1.4.0})'",
> ]
>
> @@ -94,7 +94,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
> "{IPv4(13,101,0,0), 24, P3}",
> ]
>
> - frame_sizes = [64, 128, 256, 512, 2048] # 65, 128
> + frame_sizes = [64, 72, 128, 256, 512, 1024, 2048] # 65, 128
> methods = ['lpm']#, 'exact']
>
> #
> @@ -309,7 +309,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
> """
> pass
>
> - def test_perf_l3fwd_4ports(self):
> + def no_test_perf_l3fwd_4ports(self):
> """
> L3fwd main 4 ports.
> """
> @@ -360,7 +360,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
>
> dts.results_table_print()
>
> - def test_perf_l3fwd_2ports(self):
> + def no_test_perf_l3fwd_2ports(self):
> """
> L3fwd main 2 ports.
> """
> @@ -395,6 +395,7 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
> repl1 = "C{" + str(self.port_socket)
>
> coreMask = {}
> + cmdlist = []
> rtCmdLines = {}
> cmdlist = TestL3fwd.test_cases_2_ports
> for cmdline_pat in cmdlist:
> @@ -471,12 +472,12 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
>
> ports = self.dut.get_ports()
> ports_num = len(ports)
> - header_row = ["Frame", "mode", "S/C/T", "LR_tx_pkts(1min)",
> "LR_rx_pkts(1min)", "LR_loss_pkts(1min)", "% zero_loss_rate",
> "zero_loss_throughput(Mpps)"]
> + header_row = ["Frame_size(byte)", "mode", "S/C/T",
> "zero_loss_throughput(Mpps)", " % zero_loss_rate"]# "LR_tx_pkts(1min)",
> "LR_rx_pkts(1min)", "LR_loss_pkts(1min)", "% zero_loss_rate",
> "zero_loss_throughput(Mpps)"]
> self.l3fwd_test_results['header'] = header_row
> dts.results_table_add_header(header_row)
> self.l3fwd_test_results['data'] = []
>
> - for frame_size in [64, 128, 256, 512, 1024]:
> + for frame_size in TestL3fwd.frame_sizes:
>
> # Prepare traffic flow
> payload_size = frame_size - \
> @@ -501,10 +502,17 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
>
> coreMask = {}
> rtCmdLines = {}
> + cmdlist = []
> if ports_num == 4:
> - cmdlist = TestL3fwd.test_cases_4_ports
> + for i in TestL3fwd.test_cases_4_ports:
> + cmdlist.append(i)
> else:
> - cmdlist = TestL3fwd.test_cases_2_ports
> + for i in TestL3fwd.test_cases_2_ports:
> + cmdlist.append(i)
> + if 'eagle' in self.nic:
> + del cmdlist[2]
> + else:
> + del cmdlist[1]
> for cmdline_pat in cmdlist:
> corelist = []
> rtCmdLines[cmdline_pat[1]] = cmdline_pat[2]
> @@ -561,14 +569,15 @@ class TestL3fwd(TestCase,IxiaPacketGenerator):
> zero_loss_rate, tx_pkts, rx_pkts =
> self.tester.run_rfc2544(tgenInput, delay=60)
> loss_pkts = tx_pkts - rx_pkts
> self.dut.send_expect("^C", "#")
> - linerate = self.wirespeed(self.nic, frame_size, 2)
> + linerate = self.wirespeed(self.nic, frame_size,
> ports_num)
> zero_loss_throughput = (linerate * zero_loss_rate)
> / 100
>
> tx_pkts = human_read_number(tx_pkts)
> rx_pkts = human_read_number(rx_pkts)
> loss_pkts = human_read_number(loss_pkts)
>
> - data_row = [frame_size, mode, cores, tx_pkts,
> rx_pkts, loss_pkts, zero_loss_rate, zero_loss_throughput]
> + #data_row = [frame_size, mode, cores, tx_pkts,
> rx_pkts, loss_pkts, zero_loss_rate, zero_loss_throughput]
> + data_row = [frame_size, mode, cores,
> zero_loss_throughput, zero_loss_rate]
> dts.results_table_add_row(data_row)
> self.l3fwd_test_results['data'].append(data_row)
> else:
> diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py
> index aeab99a..d078487 100644
> --- a/tests/TestSuite_pmd.py
> +++ b/tests/TestSuite_pmd.py
> @@ -57,15 +57,12 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>
> self.rxfreet_values = [0, 8, 16, 32, 64, 128]
>
> - self.test_cycles = [{'cores': '1S/1C/1T', 'Mpps': {}, 'pct': {}},
> - {'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}},
> - {'cores': '1S/2C/2T', 'Mpps': {}, 'pct': {}},
> - {'cores': '1S/4C/1T', 'Mpps': {}, 'pct': {}},
> - {'cores': '1S/8C/1T', 'Mpps': {}, 'pct': {}}
> + self.test_cycles = [{'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}}
> ]
>
> self.table_header = ['Frame Size']
> for test_cycle in self.test_cycles:
> + self.table_header.append("app")
> self.table_header.append("%s Mpps" % test_cycle['cores'])
> self.table_header.append("% linerate")
>
> @@ -126,7 +123,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> core_mask = dts.create_mask(core_list)
> port_mask = dts.create_mask(self.dut.get_ports())
>
> - self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --
> txq=%d --portmask=%s --rss-ip" % (core_mask, queues, queues, port_mask))
> + self.pmdout.start_testpmd(core_config, " --rxq=%d --txq=%d --
> portmask=%s --rss-ip --txrst=32 --txfreet=32 --txd=128 --txqflags=0xf01" %
> (queues, queues, port_mask), socket=self.ports_socket)
> command_line = self.pmdout.get_pmd_cmd()
>
> info = "Executing PMD (mac fwd) using %s\n" %
> test_cycle['cores']
> @@ -171,6 +168,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> table_row = [frame_size]
>
> for test_cycle in self.test_cycles:
> + table_row.append("testpmd")
> table_row.append(test_cycle['Mpps'][frame_size])
> table_row.append(test_cycle['pct'][frame_size])
>
> @@ -209,7 +207,8 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> core_mask = dts.create_mask(core_list)
> port_mask = dts.create_mask([self.dut_ports[0],
> self.dut_ports[1]])
>
> - self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --
> txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
> + #self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --
> txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
> + self.pmdout.start_testpmd(core_config, " --rxq=%d --txq=%d --
> portmask=%s --rss-ip --txrst=32 --txfreet=32 --txd=128" % (queues, queues,
> port_mask), socket=self.ports_socket)
> command_line = self.pmdout.get_pmd_cmd()
>
> info = "Executing PMD using %s\n" % test_cycle['cores']
> @@ -249,6 +248,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> for frame_size in self.frame_sizes:
> table_row = [frame_size]
> for test_cycle in self.test_cycles:
> + table_row.append("testpmd")
> table_row.append(test_cycle['Mpps'][frame_size])
> table_row.append(test_cycle['pct'][frame_size])
>
> --
> 1.9.3
More information about the dts
mailing list