[dts] [PATCH V1] tests: add test for vhost/virtio loopback performance
Yao, Lei A
lei.a.yao at intel.com
Wed Dec 28 06:56:14 CET 2016
Some update. Thanks.
> -----Original Message-----
> From: Liu, Yong
> Sent: Wednesday, December 28, 2016 1:28 PM
> To: Yao, Lei A <lei.a.yao at intel.com>; dts at dpdk.org
> Cc: Yao, Lei A <lei.a.yao at intel.com>
> Subject: RE: [dts] [PATCH V1] tests: add test for vhost/virtio loopback
> performance
>
> Lei, some comments below.
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lei,yao
> > Sent: Thursday, December 22, 2016 11:29 AM
> > To: dts at dpdk.org
> > Cc: Yao, Lei A
> > Subject: [dts] [PATCH V1] tests: add test for vhost/virtio loopback
> > performance
> >
> > From: lei yao <lei.a.yao at intel.com>
> >
> > This test won't use qemu, but will use two testpmd thread to launch vhost-
> > user and
> > virtio-user to simulate the qemu user case.
> >
> > Signed-off-by: lei yao <lei.a.yao at intel.com>
> > ---
> > ...Suite_vhost_loopback_performance_virtio_user.py | 256
> > +++++++++++++++++++++
> > 1 file changed, 256 insertions(+)
> > create mode 100644
> > tests/TestSuite_vhost_loopback_performance_virtio_user.py
> >
> > diff --git a/tests/TestSuite_vhost_loopback_performance_virtio_user.py
> > b/tests/TestSuite_vhost_loopback_performance_virtio_user.py
> > new file mode 100644
> > index 0000000..46d2110
> > --- /dev/null
> > +++ b/tests/TestSuite_vhost_loopback_performance_virtio_user.py
> > @@ -0,0 +1,256 @@
> > +#
> > +# BSD LICENSE
> > +#
> > +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> > +# All rights reserved.
> > +#
> > +# Redistribution and use in source and binary forms, with or without
> > +# modification, are permitted provided that the following conditions
> > +# are met:
> > +#
> > +# * Redistributions of source code must retain the above copyright
> > +# notice, this list of conditions and the following disclaimer.
> > +# * Redistributions in binary form must reproduce the above copyright
> > +# notice, this list of conditions and the following disclaimer in
> > +# the documentation and/or other materials provided with the
> > +# distribution.
> > +# * Neither the name of Intel Corporation nor the names of its
> > +# contributors may be used to endorse or promote products derived
> > +# from this software without specific prior written permission.
> > +#
> > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> > +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> > +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> > +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> > +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> > +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
> TORT
> > +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> OF THE USE
> > +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > +
> > +
> > +"""
> > +DPDK Test suite.
> > +Test Vhost loopback performance for Mergeable, normal , vector Path
> > +"""
> > +import string
> > +import utils
> > +import time
> > +import re
> > +from test_case import TestCase
> > +
> > +
> > +class TestVhostLoopback(TestCase):
> > +
> > + def set_up_all(self):
> > + """
> > + Run at the start of each test suite.
> > + """
> > + # Clean the execution environment
> > + self.dut.send_expect("rm -rf ./vhost.out", "#")
> > + self.dut.send_expect("rm -rf ./vhost-net*", "#")
> > + self.dut.send_expect("killall -s INT vhost-switch", "#")
> > + self.dut.send_expect("killall -s INT testpmd", "#")
>
> Dpdk application will be automated killed by framework. There's no need to
> kill dpdk application in set_up_all function.
>
So both vhost-switch and testpmd will be cleaned by framework, right?
> > + self.header_row = ["FrameSize(B)", "Mode", "Throughput(Mpps)",
> > "Virtio Version"]
> > + self.frame_sizes = [64, 128, 260, 520, 1024, 1500]
> > + self.test_cycles = {'Mpps': {}, 'pct': {}}
> > +
> > + def set_up(self):
> > + """
> > + Run before each test case.
> > + """
> > + self.dut.restore_interfaces()
> > + pass
>
> This is critical function which will bind all ports to default driver.
> You can use simple code like "port.bind_driver()" to bind port to default
> driver and "port.bind_driver(driver=self.drivername)" to igb_uio driver.
> Just in this suite, I can't see any requirement to do this.
>
Because this test cases don't need any NIC binned to pmd driver. So I use this function
to clean it.
> > +
> > + def test_perf_vhost_mergeable_loopback(self):
> > + """
> > + Benchmark performance for frame_sizes.
> > + """
> > +
> > + # Modify the driver file to disbale the Mergeable, then re-
> > compile the DPDK and back up the original driver file
> > + for frame_size in self.frame_sizes:
> > + # Back up the original driver file
> > +
> > self.dut.send_expect("cp ./drivers/net/virtio/virtio_ethdev.h ./", "#", 30)
> > + # Change the packet size sent by the testpmd
> > + self.change_testpmd_size = "sed -i -e 's/#define
> > TXONLY_DEF_PACKET_LEN.*$/#define
> TXONLY_DEF_PACKET_LEN %d/' ./app/test-
> > pmd/testpmd.h" % frame_size
>
> If changed any code in testpmd, please restore it back for other suites may
> depend on that.
Sure. I will restore the testpmd for every test in V2.
> > + self.dut.send_expect(self.change_testpmd_size, "#", 30)
> > + self.dut.build_install_dpdk(self.dut.target)
> > +
> > + # Start the vhost user side
> > + cmd = self.target + "/app/testpmd -n 4 -c 0x03 " + \
> > + "-m 2048 --file-prefix=vhost --vdev
> > 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i"
> > + self.dut.send_expect(cmd, "testpmd>", 120)
> > + # Start the virtio_user side
> > + vhost_user = self.dut.new_session()
> > + command_line_user = self.target + "/app/testpmd -n 4 -c 0x0c
> > " + \
> > + " -m 2048 --no-pci --file-prefix=virtio "
> > + \
> > + " --
> > vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net" + \
> > + " -- -i --txqflags=0xf01 --disable-hw-
> > vlan-filter"
> > +
> > + vhost_user.send_expect(command_line_user, "testpmd>", 120)
> > +
> > + self.dut.send_expect("set fwd mac retry", "testpmd>", 60)
> > + self.dut.send_expect("start tx_first 32", "testpmd>", 60)
> > + vhost_user.send_expect("start tx_first 32", "testpmd> ", 120)
> > + results = 0.0
> > + out = self.dut.send_expect("show port stats all", "testpmd>",
> > 60)
> > + time.sleep(5)
> > + # Get throughput 10 times and calculate the average
> > throughput
> > + for i in range(10):
> > + out = self.dut.send_expect("show port stats all",
> > "testpmd>", 60)
> > + time.sleep(5)
> > + lines = re.search("Rx-pps:\s*(\d*)", out)
> > + result = lines.group(1)
> > + results += float(result)
> > + Mpps = results / (1000000 * 10)
> > + self.result_table_create(self.header_row)
> > +
> > + self.dut.send_expect("quit", "#", 60)
> > + vhost_user.send_expect("quit", "#", 60)
> > + # Restore the driver file
> > + self.dut.send_expect("rm -
> > rf ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> > +
> > self.dut.send_expect("mv ./virtio_ethdev.h ./drivers/net/virtio/", "#", 30)
> > + self.test_cycles['Mpps'][frame_size] = Mpps
> > + self.test_cycles['pct'][frame_size] = "Virtio 0.95"
> > +
> > + for frame_size in self.frame_sizes:
> > + results_row = [frame_size]
> > + results_row.append("Mergeable on")
> > + results_row.append(self.test_cycles['Mpps'][frame_size])
> > + results_row.append(self.test_cycles['pct'][frame_size])
> > + self.result_table_add(results_row)
> > +
> > + self.result_table_print()
> > +
> > + def test_perf_vhost_vector_loopback(self):
> > + """
> > + Benchmark performance for frame_sizes.
> > + """
> > + for frame_size in self.frame_sizes:
> > + # Modify the driver file to disbale the Mergeable, then re-
> > compile the DPDK and back up the original driver file
> > +
> > self.dut.send_expect("cp ./drivers/net/virtio/virtio_ethdev.h ./", "#", 30)
> > + self.dut.send_expect("sed -i
> > '/VIRTIO_NET_F_MRG_RXBUF/d' ./drivers/net/virtio/virtio_ethdev.h", "#",
> 30)
> > + self.change_testpmd_size = "sed -i -e 's/#define
> > TXONLY_DEF_PACKET_LEN .*$/#define
> TXONLY_DEF_PACKET_LEN %d/' ./app/test-
> > pmd/testpmd.h" % frame_size
>
> Same comments as previous.
>
> > + self.dut.send_expect(self.change_testpmd_size, "#", 30)
> > + self.dut.build_install_dpdk(self.dut.target)
> > +
> > + # Start the vhost user side
> > + cmd = self.target + "/app/testpmd -n 4 -c 0x03 " + \
> > + "-m 2048 --file-prefix=vhost --vdev
> > 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i"
> > + self.dut.send_expect(cmd, "testpmd>", 120)
> > + # Start the virtio_user side
> > + vhost_user = self.dut.new_session()
> > + command_line_user = self.target + "/app/testpmd -n 4 -c 0x0c
> > " + \
> > + " -m 2048 --no-pci --file-prefix=virtio "
> > + \
> > + " --
> > vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net " + \
> > + " -- -i --txqflags=0xf01 --disable-hw-
> > vlan-filter"
> > +
> > + vhost_user.send_expect(command_line_user, "testpmd>", 120)
> > +
> > + self.dut.send_expect("set fwd mac retry", "testpmd>", 60)
> > + self.dut.send_expect("start tx_first 32", "testpmd>", 60)
> > + vhost_user.send_expect("start tx_first 32", "testpmd> ", 120)
> > + results = 0.0
> > + out = self.dut.send_expect("show port stats all", "testpmd>",
> > 60)
> > + time.sleep(5)
> > + # Get throughput 10 times and calculate the average
> > throughput
> > + for i in range(10):
> > + out = self.dut.send_expect("show port stats all",
> > "testpmd>", 60)
> > + time.sleep(5)
> > + lines = re.search("Rx-pps:\s*(\d*)", out)
> > + result = lines.group(1)
> > + results += float(result)
> > + Mpps = results / (1000000 * 10)
> > + self.result_table_create(self.header_row)
>
> Code look like not aligned here, please check again.
>
> > +
> > + self.dut.send_expect("quit", "#", 60)
> > + vhost_user.send_expect("quit", "#", 60)
> > + # Restore the driver file
> > + self.dut.send_expect("rm -
> > rf ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> > +
> > self.dut.send_expect("mv ./virtio_ethdev.h ./drivers/net/virtio/", "#", 30)
> > + self.test_cycles['Mpps'][frame_size] = Mpps
> > + self.test_cycles['pct'][frame_size] = "Virtio 0.95"
> > +
> > + for frame_size in self.frame_sizes:
> > + results_row = [frame_size]
> > + results_row.append("Vector on")
> > + results_row.append(self.test_cycles['Mpps'][frame_size])
> > + results_row.append(self.test_cycles['pct'][frame_size])
> > + self.result_table_add(results_row)
> > +
> > + self.result_table_print()
> > +
> > + def test_perf_vhost_normal_loopback(self):
> > + """
> > + Benchmark performance for frame_sizes.
> > + """
> > +
> > + self.result_table_create(self.header_row)
> > + for frame_size in self.frame_sizes:
> > + # Modify the driver file to disbale the Mergeable, then re-
> > compile the DPDK and back up the original driver file
> > +
> > self.dut.send_expect("cp ./drivers/net/virtio/virtio_ethdev.h ./", "#", 30)
> > + self.dut.send_expect("sed -i
> > '/VIRTIO_NET_F_MRG_RXBUF/d' ./drivers/net/virtio/virtio_ethdev.h", "#",
> 30)
> > + self.change_testpmd_size = "sed -i -e 's/#define
> > TXONLY_DEF_PACKET_LEN .*$/#define
> TXONLY_DEF_PACKET_LEN %d/' ./app/test-
> > pmd/testpmd.h" % frame_size
> > + self.dut.send_expect(self.change_testpmd_size, "#", 30)
> > + self.dut.build_install_dpdk(self.dut.target)
> > +
> > + # Start the vhost user side
> > + cmd = self.target + "/app/testpmd -n 4 -c 0x03 " + \
> > + "-m 2048 --file-prefix=vhost --vdev
> > 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i"
> > + self.dut.send_expect(cmd, "testpmd>", 120)
> > + # Start the virtio_user side
> > + vhost_user = self.dut.new_session()
> > + command_line_user = self.target + "/app/testpmd -n 4 -c 0x0c
> > " + \
> > + " -m 2048 --no-pci --file-prefix=virtio "
> > + \
> > + " --
> > vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net" + \
> > + " -- -i --txqflags=0xf00 --disable-hw-
> > vlan-filter"
> > +
> > + vhost_user.send_expect(command_line_user, "testpmd>", 120)
> > +
> > + self.dut.send_expect("set fwd mac retry", "testpmd>", 60)
> > + self.dut.send_expect("start tx_first 32", "testpmd>", 60)
> > + vhost_user.send_expect("start tx_first 32", "testpmd> ", 120)
> > + results = 0.0
> > + out = self.dut.send_expect("show port stats all", "testpmd>",
> > 60)
> > + time.sleep(5)
> > + # Get throughput 10 times and calculate the average
> > throughput
> > + for i in range(10):
> > + out = self.dut.send_expect("show port stats all",
> > "testpmd>", 60)
> > + time.sleep(5)
> > + lines = re.search("Rx-pps:\s*(\d*)", out)
> > + result = lines.group(1)
> > + results += float(result)
> > + Mpps = results / (1000000 * 10)
> > + self.result_table_create(self.header_row)
> > +
> > + self.dut.send_expect("quit", "#", 60)
> > + vhost_user.send_expect("quit", "#", 60)
> > + # Restore the driver file
> > + self.dut.send_expect("rm -
> > rf ./drivers/net/virtio/virtio_ethdev.h", "#", 30)
> > +
> > self.dut.send_expect("mv ./virtio_ethdev.h ./drivers/net/virtio/", "#", 30)
> > + self.test_cycles['Mpps'][frame_size] = Mpps
> > + self.test_cycles['pct'][frame_size] = "Virtio 0.95"
> > +
> > + for frame_size in self.frame_sizes:
> > + results_row = [frame_size]
> > + results_row.append("Normal")
> > + results_row.append(self.test_cycles['Mpps'][frame_size])
> > + results_row.append(self.test_cycles['pct'][frame_size])
> > + self.result_table_add(results_row)
> > +
> > + self.result_table_print()
> > +
> > + def tear_down(self):
> > + """
> > + Run after each test case.
> > + """
> > + time.sleep(2)
> > +
> > + def tear_down_all(self):
> > + """
> > + Run after each test suite.
> > + """
> > + # Recompile the dpdk because we change the source code during the
> > test
>
> Here need to restore default Tx packet size.
Sure. I will add it.
>
> > + self.dut.build_install_dpdk(self.dut.target)
> > --
> > 2.7.4
More information about the dts
mailing list