[dts] [PATCH V1][dts 1/2] add allmutlicast and broadcast test plan
Liu, Yong
yong.liu at intel.com
Wed May 4 19:10:45 CEST 2016
Thanks, applied.
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of xu,huilong
> Sent: Thursday, April 21, 2016 11:03 PM
> To: dts at dpdk.org
> Cc: Xu, HuilongX
> Subject: [dts] [PATCH V1][dts 1/2] add allmutlicast and broadcast test
> plan
>
> Signed-off-by: xu,huilong <huilongx.xu at intel.com>
> ---
> test_plans/dynamic_config_test_plan.rst | 57
> ++++++++++++++++++++++++++++++++-
> 1 file changed, 56 insertions(+), 1 deletion(-)
>
> diff --git a/test_plans/dynamic_config_test_plan.rst
> b/test_plans/dynamic_config_test_plan.rst
> index f1dbd1b..93a0434 100644
> --- a/test_plans/dynamic_config_test_plan.rst
> +++ b/test_plans/dynamic_config_test_plan.rst
> @@ -1,4 +1,4 @@
> -.. Copyright (c) <2010, 2011>, Intel Corporation
> +.. Copyright (c) <2010, 2016>, Intel Corporation
> All rights reserved.
>
> Redistribution and use in source and binary forms, with or without
> @@ -194,6 +194,61 @@ Send a packet with with destination MAC address equal
> with the port 8 address.::
>
> Verify that the packet was received (RX-packets incremented).
>
> +Test Case: Disable Promiscuous Mode boardcast
> +===================================
> +
> +Disable promiscuous mode and verify that the packets are received
> boardcast packet.::
> +
> + testpmd> set promisc all off
> + testpmd> set fwd io
> + testpmd> clear port stats all
> +Send a packet with destination MAC address different than the port 0
> address.::
> +
> + testpmd> show port stats 1
> +
> + ######################## NIC statistics for port 1
> ########################
> + RX-packets: 0 RX-errors: 0 RX-bytes: 0
> + TX-packets: 0 TX-errors: 0 TX-bytes: 0
> +
> ##########################################################################
> ##
> +
> +Verify that no packet was fwd (port 1 TX-packets is 0).
> + testpmd> clear port stats all
> +Send a boardcast packet .::
> +
> + ######################## NIC statistics for port 1
> ########################
> + RX-packets: 0 RX-errors: 0 RX-bytes: 0
> + TX-packets: 1 TX-errors: 0 TX-bytes: 80
> +
> ##########################################################################
> ##
> +
> +Verify that the packet was received and fwd(TX-packets is 1).
>
> +Test Case: Disable Promiscuous Mode mutlicast
> +===================================
> +
> +Disable promiscuous mode and verify that the packets are received
> mutlicast packet.::
> +
> + testpmd> set promisc all off
> + testpmd> set fwd io
> + testpmd> clear port stats all
> + testpmd> set allmulti all off
> +Send a packet with destination MAC is mutlicast mac eg:
> 01:00:00:33:00:01.::
> +
> + testpmd> show port stats 1
> +
> + ######################## NIC statistics for port 1
> ########################
> + RX-packets: 0 RX-errors: 0 RX-bytes: 0
> + TX-packets: 0 TX-errors: 0 TX-bytes: 0
> +
> ##########################################################################
> ##
> +
> +Verify that no packet was fwd (port 1 TX-packets is 0).
> + testpmd> clear port stats all
> + testpmd> set allmulti all on
> +Send a packet with destination MAC is mutlicast mac eg:
> 01:00:00:33:00:01.::
> +
> + ######################## NIC statistics for port 1
> ########################
> + RX-packets: 0 RX-errors: 0 RX-bytes: 0
> + TX-packets: 1 TX-errors: 0 TX-bytes: 80
> +
> ##########################################################################
> ##
>
> +Verify that the packet was received and fwd(TX-packets is 1).
>
> --
> 1.9.3
More information about the dts
mailing list