[dts] [PATCH V1] fix userspace failed case

[Liu, Yong]

Huilong, 
Comments inline. Thanks.

> -----Original Message-----
> From: Xu, HuilongX
> Sent: Thursday, August 24, 2017 11:57 AM
> To: Liu, Yong <yong.liu at intel.com>; Xu, GangX <gangx.xu at intel.com>;
> dts at dpdk.org
> Subject: RE: [dts] [PATCH V1] fix userspace failed case
> 
> Hi yong,
> My comments as below. Could you check it?
> 
> -----Original Message-----
> From: Liu, Yong
> Sent: Thursday, August 24, 2017 11:51 AM
> To: Xu, GangX <gangx.xu at intel.com>; dts at dpdk.org
> Cc: Xu, HuilongX <huilongx.xu at intel.com>
> Subject: RE: [dts] [PATCH V1] fix userspace failed case
> 
> Thanks gang, few comments below.
> 
> > -----Original Message-----
> > From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of xu,gang
> > Sent: Wednesday, August 23, 2017 5:02 PM
> > To: dts at dpdk.org
> > Cc: Xu, HuilongX <huilongx.xu at intel.com>
> > Subject: [dts] [PATCH V1] fix userspace failed case
> >
> > From: "xu,huilong" <huilongx.xu at intel.com>
> >
> > update list:
> > 1. update userspace example path for setup app 2. add sleep time for
> > app update link status with fortville nic in port config case 3. dpdk
> > userspace tools dump eeprom file size different kernel ethtools dump,
> > so only compare same size bytes 4. use scapy tool send packet replace
> > packet model, because app can't received packet by use packet model
> >
> > Signed-off-by: xu,huilong <huilongx.xu at intel.com>
> > ---
> >  tests/TestSuite_userspace_ethtool.py | 16 ++++++++++++----
> >  1 file changed, 12 insertions(+), 4 deletions(-)
> >
> > diff --git a/tests/TestSuite_userspace_ethtool.py
> > b/tests/TestSuite_userspace_ethtool.py
> > index 937a9e5..1b234c1 100644
> > --- a/tests/TestSuite_userspace_ethtool.py
> > +++ b/tests/TestSuite_userspace_ethtool.py
> > @@ -61,7 +61,7 @@ class TestUserspaceEthtool(TestCase,
> > IxiaPacketGenerator):
> >          self.verify("Error" not in out, "compilation error 1")
> >          self.verify("No such file" not in out, "compilation error 2")
> >
> > -        path = "./examples/ethtool/ethtool-app/ethtool-app/%s/ethtool" %
> > self.target
> > +        path = "./examples/ethtool/ethtool-app/%s/ethtool" %
> > + self.target
> >          self.cmd = "%s -c f -n %d" % (path,
> > self.dut.get_memory_channels())
> >
> >          # pause frame basic configuration @@ -370,7 +370,10 @@ class
> > TestUserspaceEthtool(TestCase,
> > IxiaPacketGenerator):
> >              self.dut.send_expect("ethtool --eeprom-dump %s raw on >
> > %s" % (intf, ethtool_eeprom), "# ")
> >              # wait for file ready
> >              time.sleep(2)
> > -            portinfo['ethtool_eeprom'] = ethtool_eeprom
> > +            # dpdk userspace dump eeprom-dump size different with
> > + kernel
> > ethtool dump eeprom-dump, so only compare same size bytes
> > +            dpdk_eeprom_size = int(self.dut.send_expect('ls -all %s'
> > + %
> > portinfo['eeprom_file'], '# ').split(' ')[4].strip())
> 
> There is one more simple command to get file size.
> "stat -c %s"
> Stat command is default tools in all linux os?, if yes, I think can use
> stat command replace ls.

Stat command is belong to GNU coreutils. "ls" also in the same package. 
It will be fine to utilize stat command. 

> > +            self.dut.send_expect('dd if=%s of=%s bs=%d count=1' %
> > (ethtool_eeprom, "ethtool_eeprom_%d_cat.bin" % index,
> > dpdk_eeprom_size),
> > "#")
> > +            portinfo['ethtool_eeprom'] = "ethtool_eeprom_%d_cat.bin"
> > + %
> > index
> >              # bind to original driver
> >              portinfo['net_dev'].bind_driver(portinfo['ori_driver'])
> >
> > @@ -394,10 +397,12 @@ class TestUserspaceEthtool(TestCase,
> > IxiaPacketGenerator):
> >              rx_ring, _, tx_ring, _ = self.strip_ringparam(index)
> >              self.verify(rx_ring == rx_max, "Userspace tool failed to
> > set Rx ring parameter")
> >              self.verify(tx_ring == tx_max, "Userspace tool failed to
> > set Tx ring parameter")
> > -            pkt = Packet()
> >              tester_port = self.tester.get_local_port(port)
> >              intf = self.tester.get_interface(tester_port)
> > -            pkt.send_pkt(tx_port=intf)
> > +            # use scapy send packet, because example can't receive
> > + packet
> > by packet model
> > +            packet =
> > r'sendp([Ether(dst="ff:ff:ff:ff:ff:ff")/IP()/UDP()/Raw()],
> > iface="%s")' % intf
> > +            self.tester.scapy_append(packet)
> > +            self.tester.scapy_execute()
> 
> The only difference I can see is the destination mac address.
> Could you please try again with below code?
> I review packet mode, if destination mac address not set in packet mode.
> Packet model will set default destination mac address is
> "ff:ff:ff:ff:ff:ff",
> So I think not try again pkt with "ff:ff:ff:ff:ff:ff" destination mac
> address.
> 

I'm wondering that if any bug in packet module which can cause this issue.
packet module will call the same API as scapy cli.

> pkt.config_layer('ether', {'dst': 'ff:ff:ff:ff:ff:ff'})
> 
> >              rx_pkts, tx_pkts = self.strip_portstats(index)
> >              self.verify(rx_pkts == ori_rx_pkts + 1, "Failed to
> > forward after ring parameter changed")
> >              self.dut.send_expect("quit", "# ") @@ -499,8 +504,11 @@
> > class TestUserspaceEthtool(TestCase,
> > IxiaPacketGenerator):
> >          for index in range(len(self.ports)):
> >              port = self.ports[index]
> >              ori_rx_pkts, _ = self.strip_portstats(index)
> > +            # add sleep time for example update port link status
> > +            time.sleep(10)
> >              # stop port
> >              self.dut.send_expect("stop %d" % index, "EthApp>")
> > +            time.sleep(10)
> >              # check packet not forwarded when port is stop
> >              pkt = Packet()
> >              tester_port = self.tester.get_local_port(port)
> > --
> > 1.9.3