[dts] [PATCH] test_plans: fix some rst syntax warnings

[Marvin Liu]

Signed-off-by: Marvin Liu <yong.liu at intel.com>

diff --git a/test_plans/distributor_test_plan.rst b/test_plans/distributor_test_plan.rst
index cd4e71b..e627faa 100644
--- a/test_plans/distributor_test_plan.rst
+++ b/test_plans/distributor_test_plan.rst
@@ -128,7 +128,7 @@ The number of workers are configured through the command line interface of the
 application:
 
 The test report should provide the measurements(mpps and % of the line rate)
-for each action in lcores as listed in the table below:
+for each action in lcores as listed in the table below::
 
 	+----+---------+------------------+------------------+------------------+------------------+------------------+------------------+
 	| #  |Number of| Throughput Rate  | Throughput Rate  | Throughput Rate  | Throughput Rate  | Throughput Rate  | Throughput Rate  |
diff --git a/test_plans/sriov_kvm_test_plan.rst b/test_plans/sriov_kvm_test_plan.rst
index e0eedd4..f1c17c3 100644
--- a/test_plans/sriov_kvm_test_plan.rst
+++ b/test_plans/sriov_kvm_test_plan.rst
@@ -79,23 +79,21 @@ For VM0 start up command, you can refer to below command.::
         -net tap,script=/etc/qemu-ifup \
         -device pci-assign,host=08:10.0 -vnc :1 --daemonize
 
-The /etc/qemu-ifup can be below script, need you to create first:
-
-   .. code-block:: shell
-
-       #!/bin/sh
-       set -x
-       switch=br0
-       if [ -n "$1" ];then
-           /usr/sbin/tunctl -u `whoami` -t $1
-           /sbin/ip link set $1 up
-           sleep 0.5s
-           /usr/sbin/brctl addif $switch $1
-           exit 0
-       else
-           echo "Error: no interface specified"
-       exit 1
-       fi
+The /etc/qemu-ifup can be below script, need you to create first::
+
+    #!/bin/sh
+    set -x
+    switch=br0
+    if [ -n "$1" ];then
+        /usr/sbin/tunctl -u `whoami` -t $1
+        /sbin/ip link set $1 up
+        sleep 0.5s
+        /usr/sbin/brctl addif $switch $1
+        exit 0
+    else
+        echo "Error: no interface specified"
+    exit 1
+    fi
 
 Similar for VM0, please refer to below command for VM1::
 
diff --git a/test_plans/vf_port_start_stop_test_plan.rst b/test_plans/vf_port_start_stop_test_plan.rst
index 28ad299..541cd2b 100644
--- a/test_plans/vf_port_start_stop_test_plan.rst
+++ b/test_plans/vf_port_start_stop_test_plan.rst
@@ -91,23 +91,21 @@ Create Two VF interfaces from two kernel PF interfaces, and then attach them to
       -device pci-assign,bus=pci.0,addr=0x7,host=04:10.1 \
       -vnc :11 -daemonize
 
-   the /etc/qemu-ifup can be below script, need you to create first:
-
-      .. code-block:: shell
-
-         #!/bin/sh
-         set -x
-         switch=br0
-         if [ -n "$1" ];then
-             /usr/sbin/tunctl -u `whoami` -t $1
-             /sbin/ip link set $1 up
-             sleep 0.5s
-             /usr/sbin/brctl addif $switch $1
-             exit 0
-         else
-             echo "Error: no interface specified"
-         exit 1
-         fi
+   the /etc/qemu-ifup can be below script, need you to create first::
+
+      #!/bin/sh
+      set -x
+      switch=br0
+      if [ -n "$1" ];then
+          /usr/sbin/tunctl -u `whoami` -t $1
+          /sbin/ip link set $1 up
+          sleep 0.5s
+          /usr/sbin/brctl addif $switch $1
+          exit 0
+      else
+          echo "Error: no interface specified"
+      exit 1
+      fi
 
    Set up bridge br0 before create /etc/qemu-ifup, for example::
 
-- 
1.9.3