[dts] [PATCH V1 2/2] add test plan for test suite nsh
wang fei
feix.y.wang at intel.com
Fri Dec 22 13:05:49 CET 2017
Signed-off-by: wang fei <feix.y.wang at intel.com>
---
test_plans/nsh_test_plan.rst | 97 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 test_plans/nsh_test_plan.rst
diff --git a/test_plans/nsh_test_plan.rst b/test_plans/nsh_test_plan.rst
new file mode 100644
index 0000000..3932313
--- /dev/null
+++ b/test_plans/nsh_test_plan.rst
@@ -0,0 +1,97 @@
+.. Copyright (c) <2016>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=========================================
+Fortville, L2 NSH packet type recognition
+=========================================
+
+Prerequisites
+=============
+
+1. Hardware:
+ one Fortville NIC (4x 10G or 2x10G or 2x40G or 1x10G)
+
+2. software:
+ dpdk: http://dpdk.org/git/dpdk
+ scapy: http://www.secdev.org/projects/scapy/
+
+3. Assuming that DUT ports ``0`` and ``1`` are connected to the tester's port ``A`` and ``B``.
+
+Test Case 1: NSH ptype recognition
+==================================
+1) start testpmd, start in rxonly mode,
+
+./testpmd -c 0xff -n 4 -- -i --portmask=0x3 --txqflags=0
+testpmd> set fwd rxonly
+testpmd> set verbose 1
+testpmd> start
+
+2) send packet as the following, verify packet type can be recognized correctly.
+
+ether+nsh
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x0,NSP=0x000002,NSI=0xff)], iface="ens260f0")
+
+ether+nsh+ip
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x1,NSP=0x000002,NSI=0xff)/IP(src="192.168.0.1", dst="192.168.0.2")], iface="ens260f0")
+
+ether+nsh+ip+icmp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x1,NSP=0x000002,NSI=0xff)/IP(src="192.168.0.1", dst="192.168.0.2")/ICMP()], iface="ens260f0")
+
+ether+nsh+ip_frag
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x1,NSP=0x000002,NSI=0xff)/IP(src="192.168.0.1", dst="192.168.0.2",frag=1,flags="MF")], iface="ens260f0")
+
+ether+nsh+ip+tcp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x1,NSP=0x000002,NSI=0xff)/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=1024,dport=1025)], iface="ens260f0")
+
+ether+nsh+ip+udp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x1,NSP=0x000002,NSI=0xff)/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=1024,dport=1025)], iface="ens260f0")
+
+ether+nsh+ip+sctp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x1,NSP=0x000002,NSI=0xff)/IP(src="192.168.0.1", dst="192.168.0.2")/SCTP(tag=1)/SCTPChunkData(data='X' * 16)], iface="ens260f0")
+
+ether+nsh+ipv6
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x2,NSP=0x000002,NSI=0xff)/IPv6(src="2001::1", dst="2003::2")], iface="ens260f0")
+
+ether+nsh+ipv6+icmp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x2,NSP=0x000002,NSI=0xff)/IPv6(src="2001::1", dst="2003::2",nh=0x3A)/ICMP()], iface="ens260f0")
+
+ether+nsh+ipv6_frag
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x2,NSP=0x000002,NSI=0xff)/IPv6(src="2001::1", dst="2003::2")/IPv6ExtHdrFragment()], iface="ens260f0")
+
+ether+nsh+ipv6+tcp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x2,NSP=0x000002,NSI=0xff)/IPv6(src="2001::1", dst="2003::2")/TCP(sport=1024,dport=1025)], iface="ens260f0")
+
+ether+nsh+ipv6+udp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x2,NSP=0x000002,NSI=0xff)/IPv6(src="2001::1", dst="2003::2")/UDP(sport=1024,dport=1025)], iface="ens260f0")
+
+ether+nsh+ipv6+sctp
+sendp([Ether(dst="00:00:00:00:01:00",type=0x894f)/NSH(Len=0x6,NextProto=0x2,NSP=0x000002,NSI=0xff)/IPv6(src="2001::1", dst="2003::2",nh=0x84)/SCTP(tag=1)/SCTPChunkData(data='X' * 16)], iface="ens260f0")
--
2.7.4
More information about the dts
mailing list