[dts] [PATCH V1 1/2] test_plans/vlan_ethertype_config_test_plan: using outer instead inner to config single vlan tpid

[Lijuan Tu]

Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
---
 test_plans/vlan_ethertype_config_test_plan.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/test_plans/vlan_ethertype_config_test_plan.rst b/test_plans/vlan_ethertype_config_test_plan.rst
index 27dbda7..9d565e7 100644
--- a/test_plans/vlan_ethertype_config_test_plan.rst
+++ b/test_plans/vlan_ethertype_config_test_plan.rst
@@ -65,7 +65,7 @@ testpmd> start
 
 2) change VLAN TPIDs to 0xA100,
 
-testpmd> vlan set inner tpid 0xA100 0
+testpmd> vlan set outer tpid 0xA100 0
 
 3) send a packet with VLAN TPIDs = 0xA100, verify it can be recognized as vlan packet.
 
@@ -108,7 +108,7 @@ Verify that the VLAN packet can be received in port ``B`` and TPID is 0x8100
 
 4) Change VLAN TPID to 0xA100 on port ``0``
 
-testpmd> vlan set inner tpid 0xA100 0
+testpmd> vlan set outer tpid 0xA100 0
 
 5) send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``, 
 Verify that the VLAN packet can be received in port ``B`` and TPID is 0xA100
@@ -136,7 +136,7 @@ Verify that packet received in port ``B`` without VLAN Tag Identifier
 
 3) Change VLAN TPID to 0xA100 on port ``0``
 
-testpmd> vlan set inner tpid 0xA100 0
+testpmd> vlan set outer tpid 0xA100 0
 
 4) send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``, 
 Verify that packet received in port ``B`` without VLAN Tag Identifier
@@ -169,7 +169,7 @@ Verify that packet received in port ``B`` with VLAN Tag Identifier 16 and TPID i
 
 4) Change VLAN TPID to 0xA100 on port ``1``
 
-testpmd> vlan set inner tpid 0xA100 1
+testpmd> vlan set outer tpid 0xA100 1
 
 5)send 1 packet without VLAN Tag Identifier on port ``A``,
 Verify that packet received in port ``B`` with VLAN Tag Identifier 16 and TPID is 0xA100.
-- 
1.9.3