[dts] [PATCH V1 1/2] test_plans/vlan_ethertype_config_test_plan: using outer instead inner to config single vlan tpid

[Liu, Yong]

Hi Jijuan,
Please give the reason why change from outer to inter in your commit log.

Thanks,
Marvin

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Lijuan Tu
> Sent: Friday, March 24, 2017 2:26 PM
> To: dts at dpdk.org; Pei, Yulong <yulong.pei at intel.com>
> Cc: Tu, LijuanX A <lijuanx.a.tu at intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/vlan_ethertype_config_test_plan:
> using outer instead inner to config single vlan tpid
> 
> Signed-off-by: Lijuan Tu <lijuanx.a.tu at intel.com>
> ---
>  test_plans/vlan_ethertype_config_test_plan.rst | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/test_plans/vlan_ethertype_config_test_plan.rst
> b/test_plans/vlan_ethertype_config_test_plan.rst
> index 27dbda7..9d565e7 100644
> --- a/test_plans/vlan_ethertype_config_test_plan.rst
> +++ b/test_plans/vlan_ethertype_config_test_plan.rst
> @@ -65,7 +65,7 @@ testpmd> start
> 
>  2) change VLAN TPIDs to 0xA100,
> 
> -testpmd> vlan set inner tpid 0xA100 0
> +testpmd> vlan set outer tpid 0xA100 0
> 
>  3) send a packet with VLAN TPIDs = 0xA100, verify it can be recognized as
> vlan packet.
> 
> @@ -108,7 +108,7 @@ Verify that the VLAN packet can be received in port
> ``B`` and TPID is 0x8100
> 
>  4) Change VLAN TPID to 0xA100 on port ``0``
> 
> -testpmd> vlan set inner tpid 0xA100 0
> +testpmd> vlan set outer tpid 0xA100 0
> 
>  5) send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
>  Verify that the VLAN packet can be received in port ``B`` and TPID is
> 0xA100
> @@ -136,7 +136,7 @@ Verify that packet received in port ``B`` without VLAN
> Tag Identifier
> 
>  3) Change VLAN TPID to 0xA100 on port ``0``
> 
> -testpmd> vlan set inner tpid 0xA100 0
> +testpmd> vlan set outer tpid 0xA100 0
> 
>  4) send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
>  Verify that packet received in port ``B`` without VLAN Tag Identifier
> @@ -169,7 +169,7 @@ Verify that packet received in port ``B`` with VLAN
> Tag Identifier 16 and TPID i
> 
>  4) Change VLAN TPID to 0xA100 on port ``1``
> 
> -testpmd> vlan set inner tpid 0xA100 1
> +testpmd> vlan set outer tpid 0xA100 1
> 
>  5)send 1 packet without VLAN Tag Identifier on port ``A``,
>  Verify that packet received in port ``B`` with VLAN Tag Identifier 16 and
> TPID is 0xA100.
> --
> 1.9.3