[dts] [PATCH 2/2] tests: support html report for single core performance test

[Liu, Yong]

Yulong, one comment below.

> -----Original Message-----
> From: Pei, Yulong
> Sent: Wednesday, May 10, 2017 1:00 PM
> To: dts at dpdk.org
> Cc: Xu, Qian Q <qian.q.xu at intel.com>; Liu, Yong <yong.liu at intel.com>
> Subject: [PATCH 2/2] tests: support html report for single core
> performance test
> 
> support html report for single core performance test.
> 
> Signed-off-by: Yulong Pei <yulong.pei at intel.com>
> ---
>  tests/TestSuite_pmd.py | 69 ++++++++++++++++++++++++++++++++++++++++++---
> -----
>  1 file changed, 59 insertions(+), 10 deletions(-)
> 
> diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py
> index 2d5b485..d004310 100644
> --- a/tests/TestSuite_pmd.py
> +++ b/tests/TestSuite_pmd.py
> @@ -37,12 +37,20 @@ Test userland 10Gb PMD
>  import utils
>  import re
>  import time
> +import os
> +
>  from test_case import TestCase
>  from time import sleep
>  from settings import HEADER_SIZE
>  from pmd_output import PmdOutput
>  from etgen import IxiaPacketGenerator
> 
> +from settings import FOLDERS
> +from system_info import SystemInfo
> +import perf_report
> +from datetime import datetime
> +
> +
>  class TestPmd(TestCase,IxiaPacketGenerator):
> 
>      def set_up_all(self):
> @@ -53,7 +61,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>          """
>          self.tester.extend_external_packet_generator(TestPmd, self)
> 
> -        self.frame_sizes = [64, 65, 128, 256, 512, 1024, 1280, 1518]
> +        self.frame_sizes = [64, 72, 128, 256, 512, 1024, 1280, 1518]
> 
>          self.rxfreet_values = [0, 8, 16, 32, 64, 128]
> 
> @@ -62,10 +70,11 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> 
>          self.table_header = ['Frame Size']
>          for test_cycle in self.test_cycles:
> -            self.table_header.append("app")
>              self.table_header.append("%s Mpps" % test_cycle['cores'])
>              self.table_header.append("% linerate")
> 
> +        self.perf_results = {'header': [], 'data': []}
> +
>          self.blacklist = ""
> 
>          # Update config file and rebuild to get best perf on FVL
> @@ -75,6 +84,19 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>          # Based on h/w type, choose how many ports to use
>          self.dut_ports = self.dut.get_ports()
> 
> +        # Get dut system information
> +        port_num = self.dut_ports[0]
> +        pci_device_id = self.dut.ports_info[port_num]['pci']
> +        ori_driver =
> self.dut.ports_info[port_num]['port'].get_nic_driver()
> +        self.dut.ports_info[port_num]['port'].bind_driver()
> +
> +        sut = SystemInfo(self.dut, pci_device_id)
> +        self.system_info = sut.get_system_info()
> +        self.nic_info = sut.get_nic_info()
> +
> +        self.dut.ports_info[port_num]['port'].bind_driver(ori_driver)
> +        ######
> +
>          self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE[
>              'ip'] + HEADER_SIZE['tcp']
> 
> @@ -92,12 +114,37 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>          """
>          Run single core performance
>          """
> +        self.perf_results['header'] = []
> +        self.perf_results['data'] = []
> +
>          if len(self.dut_ports) >= 4:
>              self.pmd_performance_4ports()
>          else:
>              self.verify(len(self.dut_ports) >= 2, "Insufficient ports for
> 2 ports performance test")
>              self.pmd_performance_2ports()
> 
> +        #To replace False to True for if condition to send the result by
> email.
> +        if False:
> +            repo_dir = FOLDERS["Depends"] + r'/dpdk'

If run dts with skip snapshot option, dpdk folder under dep may not existed.
Performance report generation at least has one dependency on testing setup, so please add more description about the dependencies in code comments.

> +            git_info = perf_report.get_dpdk_git_info(repo_dir)
> +            self.verify(git_info is not None, "get dpdk git repo error")
> +
> +            tpl_path = FOLDERS["NicDriver"] + r'/perf_report.jinja'
> +            file_tpl = os.path.abspath(tpl_path)
> +            html_msg = perf_report.generate_html_report(file_tpl, \
> +                                                        perf_data =
> self.perf_results['data'], \
> +                                                        git_info =
> git_info, \
> +                                                        nic_info =
> self.nic_info, \
> +                                                        system_info =
> self.system_info)
> +            self.verify(html_msg is not None, "generate html report
> error")
> +
> +            subject = "Single core performance test with %d ports %s --
> %s" % \
> +                      (len(self.dut_ports), self.nic,
> datetime.now().strftime('%Y-%m-%d %H:%M'))
> +            sender = 'xxxxxx at intel.com'
> +            mailto = ['xxxxxx at intel.com']
> +            smtp_server = 'smtp.intel.com'
> +            perf_report.send_html_report(sender, mailto, subject,
> html_msg, smtp_server)
> +
>      def pmd_performance_4ports(self):
>          """
>          PMD Performance Benchmarking with 4 ports.
> @@ -159,8 +206,9 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>                  _, pps =
> self.tester.traffic_generator_throughput(tgen_input, rate_percent=100,
> delay=60)
> 
>                  pps /= 1000000.0
> -                test_cycle['Mpps'][frame_size] = pps
> -                test_cycle['pct'][frame_size] = pps * 100 / wirespeed
> +                pct = pps * 100 / wirespeed
> +                test_cycle['Mpps'][frame_size] = float('%.3f' % pps)
> +                test_cycle['pct'][frame_size] = float('%.3f' % pct)
> 
>              self.dut.send_expect("stop", "testpmd> ")
>              self.dut.send_expect("quit", "# ", 30)
> @@ -173,16 +221,16 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> 
>          # Print results
>          self.result_table_create(self.table_header)
> +        self.perf_results['header'] = self.table_header
> 
>          for frame_size in self.frame_sizes:
>              table_row = [frame_size]
> -
>              for test_cycle in self.test_cycles:
> -                table_row.append("testpmd")
>                  table_row.append(test_cycle['Mpps'][frame_size])
>                  table_row.append(test_cycle['pct'][frame_size])
> 
>              self.result_table_add(table_row)
> +            self.perf_results['data'].append(table_row)
> 
>          self.result_table_print()
> 
> @@ -241,10 +289,10 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>                  # run traffic generator
>                  _, pps =
> self.tester.traffic_generator_throughput(tgen_input, rate_percent=100,
> delay=60)
> 
> -
>                  pps /= 1000000.0
> -                test_cycle['Mpps'][frame_size] = pps
> -                test_cycle['pct'][frame_size] = pps * 100 / wirespeed
> +                pct = pps * 100 / wirespeed
> +                test_cycle['Mpps'][frame_size] = float('%.3f' % pps)
> +                test_cycle['pct'][frame_size] = float('%.3f' % pct)
> 
>              self.dut.send_expect("stop", "testpmd> ")
>              self.dut.send_expect("quit", "# ", 30)
> @@ -257,14 +305,15 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> 
>          # Print results
>          self.result_table_create(self.table_header)
> +        self.perf_results['header'] = self.table_header
>          for frame_size in self.frame_sizes:
>              table_row = [frame_size]
>              for test_cycle in self.test_cycles:
> -                table_row.append("testpmd")
>                  table_row.append(test_cycle['Mpps'][frame_size])
>                  table_row.append(test_cycle['pct'][frame_size])
> 
>              self.result_table_add(table_row)
> +            self.perf_results['data'].append(table_row)
> 
>          self.result_table_print()
> 
> --
> 2.5.0