[dts] [PATCH v3 2/2] tests: support html report for single core performance test
Pei, Yulong
yulong.pei at intel.com
Fri May 12 07:35:28 CEST 2017
Hi Qian,
The requirement that you mentioned was in my todo list,
This patch only to make the original TestSuite_pmd.py send test result by html report directly.
Best Regards
Yulong Pei
-----Original Message-----
From: Xu, Qian Q
Sent: Friday, May 12, 2017 11:04 AM
To: Pei, Yulong <yulong.pei at intel.com>; dts at dpdk.org
Cc: Liu, Yong <yong.liu at intel.com>; Xu, Qian Q <qian.q.xu at intel.com>
Subject: RE: [PATCH v3 2/2] tests: support html report for single core performance test
Yulong
Some comments:
1. Could we add different RXD/TXD check? 512,1024,2048,4096 2. Maybe we can only keep 64, 72 Bytes for daily test, only in release performance test, we need test all packet sizes.
3. Do you cover 2ports(40G) test case for the single core?
As to the single core test
1. If it's for per patch set performance test, I think 64/72 packet size is enough, different RXD/TXD configurations.
2. If to figure out the single core performance, we need do a full check. Maybe not need automate these, but need check full FVL40Gx2, NNT10Gx4, FVL10Gx4 NDR--zero packet loss, which RXD/TXD is best recommended.
PDR--0.5% packet loss, which RXD/TXD is best recommended.
Allowed drops
1q/port, 2q/port for FVL40G, NNT10G for both NDR and Allowed drops
> -----Original Message-----
> From: Pei, Yulong
> Sent: Thursday, May 11, 2017 11:14 AM
> To: dts at dpdk.org
> Cc: Xu, Qian Q <qian.q.xu at intel.com>; Liu, Yong <yong.liu at intel.com>
> Subject: [PATCH v3 2/2] tests: support html report for single core performance
> test
>
> support html report for single core performance test.
>
> Signed-off-by: Yulong Pei <yulong.pei at intel.com>
> ---
> tests/TestSuite_pmd.py | 70
> ++++++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 60 insertions(+), 10 deletions(-)
>
> diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py index
> 2d5b485..8f4b22c 100644
> --- a/tests/TestSuite_pmd.py
> +++ b/tests/TestSuite_pmd.py
> @@ -37,12 +37,20 @@ Test userland 10Gb PMD import utils import re import
> time
> +import os
> +
> from test_case import TestCase
> from time import sleep
> from settings import HEADER_SIZE
> from pmd_output import PmdOutput
> from etgen import IxiaPacketGenerator
>
> +from settings import FOLDERS
> +from system_info import SystemInfo
> +import perf_report
> +from datetime import datetime
> +
> +
> class TestPmd(TestCase,IxiaPacketGenerator):
>
> def set_up_all(self):
> @@ -53,7 +61,7 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> """
> self.tester.extend_external_packet_generator(TestPmd, self)
>
> - self.frame_sizes = [64, 65, 128, 256, 512, 1024, 1280, 1518]
> + self.frame_sizes = [64, 72, 128, 256, 512, 1024, 1280, 1518]
>
> self.rxfreet_values = [0, 8, 16, 32, 64, 128]
>
> @@ -62,10 +70,11 @@ class TestPmd(TestCase,IxiaPacketGenerator):
>
> self.table_header = ['Frame Size']
> for test_cycle in self.test_cycles:
> - self.table_header.append("app")
> self.table_header.append("%s Mpps" % test_cycle['cores'])
> self.table_header.append("% linerate")
>
> + self.perf_results = {'header': [], 'data': []}
> +
> self.blacklist = ""
>
> # Update config file and rebuild to get best perf on FVL @@ -75,6 +84,19
> @@ class TestPmd(TestCase,IxiaPacketGenerator):
> # Based on h/w type, choose how many ports to use
> self.dut_ports = self.dut.get_ports()
>
> + # Get dut system information
> + port_num = self.dut_ports[0]
> + pci_device_id = self.dut.ports_info[port_num]['pci']
> + ori_driver = self.dut.ports_info[port_num]['port'].get_nic_driver()
> + self.dut.ports_info[port_num]['port'].bind_driver()
> +
> + sut = SystemInfo(self.dut, pci_device_id)
> + self.system_info = sut.get_system_info()
> + self.nic_info = sut.get_nic_info()
> +
> + self.dut.ports_info[port_num]['port'].bind_driver(ori_driver)
> + ######
> +
> self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE[
> 'ip'] + HEADER_SIZE['tcp']
>
> @@ -92,12 +114,38 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> """
> Run single core performance
> """
> + self.perf_results['header'] = []
> + self.perf_results['data'] = []
> +
> if len(self.dut_ports) >= 4:
> self.pmd_performance_4ports()
> else:
> self.verify(len(self.dut_ports) >= 2, "Insufficient ports for 2 ports
> performance test")
> self.pmd_performance_2ports()
>
> + #To replace False to True for if condition to send the result by email.
> + if False:
> + #it need place dpdk source git repo under dep directory.
> + repo_dir = FOLDERS["Depends"] + r'/dpdk'
> + git_info = perf_report.get_dpdk_git_info(repo_dir)
> + self.verify(git_info is not None, "get dpdk git repo
> + error")
> +
> + tpl_path = FOLDERS["NicDriver"] + r'/perf_report.jinja'
> + file_tpl = os.path.abspath(tpl_path)
> + html_msg = perf_report.generate_html_report(file_tpl, \
> + perf_data = self.perf_results['data'], \
> + git_info = git_info, \
> + nic_info = self.nic_info, \
> + system_info = self.system_info)
> + self.verify(html_msg is not None, "generate html report
> + error")
> +
> + subject = "Single core performance test with %d ports %s -- %s" % \
> + (len(self.dut_ports), self.nic, datetime.now().strftime('%Y-%m-
> %d %H:%M'))
> + sender = 'xxxxxx at intel.com'
> + mailto = ['xxxxxx at intel.com']
> + smtp_server = 'smtp.intel.com'
> + perf_report.send_html_report(sender, mailto, subject,
> + html_msg, smtp_server)
> +
> def pmd_performance_4ports(self):
> """
> PMD Performance Benchmarking with 4 ports.
> @@ -159,8 +207,9 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> _, pps = self.tester.traffic_generator_throughput(tgen_input,
> rate_percent=100, delay=60)
>
> pps /= 1000000.0
> - test_cycle['Mpps'][frame_size] = pps
> - test_cycle['pct'][frame_size] = pps * 100 / wirespeed
> + pct = pps * 100 / wirespeed
> + test_cycle['Mpps'][frame_size] = float('%.3f' % pps)
> + test_cycle['pct'][frame_size] = float('%.3f' % pct)
>
> self.dut.send_expect("stop", "testpmd> ")
> self.dut.send_expect("quit", "# ", 30) @@ -173,16 +222,16 @@ class
> TestPmd(TestCase,IxiaPacketGenerator):
>
> # Print results
> self.result_table_create(self.table_header)
> + self.perf_results['header'] = self.table_header
>
> for frame_size in self.frame_sizes:
> table_row = [frame_size]
> -
> for test_cycle in self.test_cycles:
> - table_row.append("testpmd")
> table_row.append(test_cycle['Mpps'][frame_size])
> table_row.append(test_cycle['pct'][frame_size])
>
> self.result_table_add(table_row)
> + self.perf_results['data'].append(table_row)
>
> self.result_table_print()
>
> @@ -241,10 +290,10 @@ class TestPmd(TestCase,IxiaPacketGenerator):
> # run traffic generator
> _, pps = self.tester.traffic_generator_throughput(tgen_input,
> rate_percent=100, delay=60)
>
> -
> pps /= 1000000.0
> - test_cycle['Mpps'][frame_size] = pps
> - test_cycle['pct'][frame_size] = pps * 100 / wirespeed
> + pct = pps * 100 / wirespeed
> + test_cycle['Mpps'][frame_size] = float('%.3f' % pps)
> + test_cycle['pct'][frame_size] = float('%.3f' % pct)
>
> self.dut.send_expect("stop", "testpmd> ")
> self.dut.send_expect("quit", "# ", 30) @@ -257,14 +306,15 @@ class
> TestPmd(TestCase,IxiaPacketGenerator):
>
> # Print results
> self.result_table_create(self.table_header)
> + self.perf_results['header'] = self.table_header
> for frame_size in self.frame_sizes:
> table_row = [frame_size]
> for test_cycle in self.test_cycles:
> - table_row.append("testpmd")
> table_row.append(test_cycle['Mpps'][frame_size])
> table_row.append(test_cycle['pct'][frame_size])
>
> self.result_table_add(table_row)
> + self.perf_results['data'].append(table_row)
>
> self.result_table_print()
>
> --
> 2.5.0
More information about the dts
mailing list