[dts] [PATCH V1] Add test suite about vhost multi queue qemu
Liu, Yong
yong.liu at intel.com
Fri Mar 9 09:51:04 CET 2018
Lihong,
Some comments are inline.
Thanks,
Marvin
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lihong
> Sent: Wednesday, April 15, 2020 1:39 AM
> To: dts at dpdk.org
> Cc: Ma, LihongX <lihongx.ma at intel.com>
> Subject: [dts] [PATCH V1] Add test suite about vhost multi queue qemu
>
> Signed-off-by: lihong <lihongx.ma at intel.com>
> ---
> tests/TestSuite_vhost_multi_queue_qemu.py | 300
> ++++++++++++++++++++++++++++++
> 1 file changed, 300 insertions(+)
> create mode 100644 tests/TestSuite_vhost_multi_queue_qemu.py
>
> diff --git a/tests/TestSuite_vhost_multi_queue_qemu.py
> b/tests/TestSuite_vhost_multi_queue_qemu.py
> new file mode 100644
> index 0000000..80a02bd
> --- /dev/null
> +++ b/tests/TestSuite_vhost_multi_queue_qemu.py
> @@ -0,0 +1,300 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2018 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +
> +Vhost PVP performance using Qemu test suite.
> +"""
> +import re
> +import time
> +import utils
> +from scapy.utils import wrpcap
> +from test_case import TestCase
> +from settings import HEADER_SIZE
> +from virt_common import VM
> +
> +
> +class TestVhostUserOneCopyOneVm(TestCase):
> +
> + def set_up_all(self):
> + # Get and verify the ports
> + self.dut_ports = self.dut.get_ports()
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for
> testing")
> + local_port = self.tester.get_local_port(self.dut_ports[0])
> + self.tx_interface = self.tester.get_interface(local_port)
> + # Get the port's socket
> + self.pf = self.dut_ports[0]
> + netdev = self.dut.ports_info[self.pf]['port']
> + self.socket = netdev.get_nic_socket()
> + self.cores = self.dut.get_core_list("1S/3C/1T",
> socket=self.socket)
> + self.verify(self.cores is not None, "Insufficient cores for speed
> testing")
Function get_core_list won't return None if allocated cores are insufficient. You can do same kind of function by check length of self.cores.
> +
> + self.queue_number = 2
> +
> + # Using file to save the vhost sample output since in jumboframe
> case,
> + # there will be lots of output
> +
> + self.virtio1 = "eth1"
> + self.virtio1_mac = "52:54:00:00:00:01"
> + self.vm_dut = None
> +
> + self.number_of_ports = 1
> + self.header_row = ["FrameSize(B)", "Throughput(Mpps)",
> "LineRate(%)", "Cycle"]
> + self.memory_channel = self.dut.get_memory_channels()
> +
> + def set_up(self):
> + #
> + # Run before each test case.
> + #
> + self.dut.send_expect("rm -rf ./vhost.out", "#")
> + self.dut.send_expect("rm -rf ./vhost-net*", "#")
> + self.dut.send_expect("killall -s INT vhost-switch", "#")
> +
> + self.frame_sizes = [64, 128, 256, 512, 1024, 1500]
> + self.vm_testpmd_vector = self.target + "/app/testpmd -c %s -n 3"
> + \
> + " -- -i --tx-offloads=0x0 " + \
> + " --rxq=%d --txq=%d --rss-ip --nb-
> cores=2" % (self.queue_number, self.queue_number)
> +
> + def launch_testpmd(self, queue=2):
> + #
> + # Launch the vhost sample with different parameters
> + #
> + testcmd = self.target + "/app/testpmd -c %s -n %d --socket-mem
> 1024,1024" + \
> + " --vdev 'net_vhost0,iface=vhost-net,queues=%d' --
> -i --rxq=%d --txq=%d --nb-cores=2"
> + self.coremask = utils.create_mask(self.cores)
> + testcmd_start = testcmd % (self.coremask, self.memory_channel,
> queue, queue, queue)
> +
> + self.vhost_user = self.dut.new_session(suite="user")
> +
> + self.vhost_user.send_expect("cd /root/dpdk", "#", 120)
DPDK folder is saved in self.dut.base_dir. I'm not sure why need additional session for starting testpmd.
Look like you haven't use host default session in this suite.
> + self.vhost_user.send_expect(testcmd_start, "testpmd> ", 120)
> + self.vhost_user.send_expect("set fwd mac", "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + def start_onevm(self, path=""):
> + #
> + # Start One VM with one virtio device
> + #
Please use """ as separator for function description.
> + self.vm = VM(self.dut, 'vm0', 'vhost_sample')
> + if(path != ""):
> + self.vm.set_qemu_emulator(path)
> + vm_params = {}
> + vm_params['driver'] = 'vhost-user'
> + vm_params['opt_path'] = './vhost-net'
> + vm_params['opt_mac'] = self.virtio1_mac
> + vm_params['opt_queue'] = self.queue_number
> + vm_params['opt_settings'] = 'mrg_rxbuf=on,mq=on,vectors=6'
Vectors should be calculated?
> +
> + self.vm.set_vm_device(**vm_params)
> +
> + try:
> + self.vm_dut = self.vm.start()
> + if self.vm_dut is None:
> + raise Exception("Set up VM ENV failed")
> + except Exception as e:
> + self.logger.error("ERROR: Failure for %s" % str(e))
> +
> + return True
> +
> + def get_vm_coremask(self):
> + #
> + # Get the vm coremask
> + #
> + cores = self.vm_dut.get_core_list("1S/3C/1T")
> + self.verify(cores is not None, "Insufficient cores for speed
> testing, add the cpu number in cfg file.")
Same comment as previous.
> + self.vm_coremask = utils.create_mask(cores)
> +
> + def send_performance(self, case, frame_sizes, tag="Performance"):
> + #
> + # Verify the testpmd can recive and forward the data
> + #
> + self.result_table_create(self.header_row)
> + for frame_size in frame_sizes:
> + info = "Running test %s, and %d frame size." % (case,
> frame_size)
> + self.logger.info(info)
> + payload_size = frame_size - HEADER_SIZE['eth'] -
> HEADER_SIZE['ip'] - HEADER_SIZE['udp']
> + tgenInput = []
> +
> + self.tester.scapy_append('a=
> [Ether(dst="%s")/IP(dst="1.1.1.1")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('b=
> [Ether(dst="%s")/IP(dst="1.1.1.20")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('c=
> [Ether(dst="%s")/IP(dst="1.1.1.7")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('d=
> [Ether(dst="%s")/IP(dst="1.1.1.8")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('a= a + b + c + d')
> + self.tester.scapy_append('wrpcap("multiqueue_2.pcap", a)')
> + self.tester.scapy_execute()
> +
> + port = self.tester.get_local_port(self.pf)
> + tgenInput.append((port, port, "multiqueue_2.pcap"))
> +
> + _, pps = self.tester.traffic_generator_throughput(tgenInput,
> delay=30)
> + Mpps = pps / 1000000.0
> + pct = Mpps * 100 / float(self.wirespeed(self.nic, frame_size,
> + self.number_of_ports))
> + data_row = [frame_size, str(Mpps), str(pct), tag]
> + self.result_table_add(data_row)
> + self.verify(Mpps != 0, "The recive data of frame-size: %d is
> 0" % frame_size)
> + self.result_table_print()
> +
> + def send_scapy(self, verify_type):
> + #
> + # Verify the virtio-pmd can recive the data before/after change
> queue size
> + #
> + payload_size = 256 - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] -
> HEADER_SIZE['udp']
> + self.tester.scapy_append('pk1 =
> [Ether(dst="%s")/IP(dst="1.1.1.1")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('pk2 =
> [Ether(dst="%s")/IP(dst="1.1.1.20")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('pk3 =
> [Ether(dst="%s")/IP(dst="1.1.1.7")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('pk4 =
> [Ether(dst="%s")/IP(dst="1.1.1.8")/UDP()/("X"*%d)]' % (self.virtio1_mac,
> payload_size))
> + self.tester.scapy_append('pk = pk1 + pk2 + pk3 + pk4')
> + self.tester.scapy_append('sendp(pk, iface="%s", count=10)' %
> (self.tx_interface))
> + self.tester.scapy_execute()
Please use those functions in packet module for packet transmission.
> +
> + out = self.vhost_user.send_expect("show port stats 0", "testpmd>
> ", 120)
> + print out
> + rx_packet = re.search("RX-packets:\s*(\d*)", out)
> + rx_num = int(rx_packet.group(1))
> + tx_packet = re.search("TX-packets:\s*(\d*)", out)
> + tx_num = int(tx_packet.group(1))
> + if verify_type == "vhost queue = virtio queue" or verify_type ==
> "vhost queue < virtio queue" :
> + verify_rx_num = 40
> + verify_tx_num = 40
> + elif verify_type == "vhost queue > virtio queue":
> + verify_rx_num = 40
> + verify_tx_num = 10
> +
> + self.verify(rx_num >= verify_rx_num and tx_num >= verify_tx_num,
> "The vm port lost some packets")
> +
> + def test_perf_pvp_multiqemu_mergeable_pmd(self):
> + #
> + # Test the performance for mergeable path
> + #
> + self.launch_testpmd()
> + self.start_onevm()
> + self.get_vm_coremask()
> +
> + self.vm_dut.send_expect(self.vm_testpmd_vector % self.vm_coremask,
> "testpmd>", 20)
> + self.vm_dut.send_expect("set fwd mac", "testpmd>", 20)
> + self.vm_dut.send_expect("start", "testpmd>")
> +
> + self.vhost_user.send_expect("stop", "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> + time.sleep(5)
> + self.send_performance(self.running_case, self.frame_sizes,
> "Virtio 0.95 Mergeable Multiqueue Performance")
> + self.vm_dut.kill_all()
> +
> + def test_dynamic_change_virtio_queue_size(self):
> + #
> + # Test the performance for change vritio queue size
> + #
> + self.launch_testpmd()
> + self.start_onevm()
> + self.vm_testpmd_queue_1 = self.target + "/app/testpmd -c %s -n 3"
> + \
> + " -- -i --tx-offloads=0x0 " + \
> + " --rxq=1 --txq=1 --rss-ip --nb-
> cores=1"
> + self.get_vm_coremask()
> + self.vm_dut.send_expect(self.vm_testpmd_queue_1 %
> self.vm_coremask, "testpmd>", 20)
> + self.vm_dut.send_expect("set fwd mac", "testpmd>", 20)
> + self.vm_dut.send_expect("start", "testpmd>")
> +
> + self.vhost_user.send_expect("clear port stats all", "testpmd> ",
> 120)
> + self.send_scapy("vhost queue > virtio queue")
> +
> + self.vm_dut.send_expect("stop", "testpmd>", 20)
> + self.vm_dut.send_expect("port stop all", "testpmd>")
> + self.vm_dut.send_expect("port config all rxq 2", "testpmd>", 20)
> + self.vm_dut.send_expect("port config all txq 2", "testpmd>")
> + self.vm_dut.send_expect("port start all", "testpmd>", 20)
> + self.vm_dut.send_expect("start", "testpmd>")
> +
> + self.vhost_user.send_expect("stop", "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + self.vhost_user.send_expect("clear port stats all", "testpmd> ",
> 120)
> + self.send_scapy("vhost queue = virtio queue")
> +
> + self.vm_dut.kill_all()
> + self.vhost_user.send_expect("quit", "# ", 120)
> +
> + def test_dynamic_change_vhost_queue_size(self):
> + #
> + # Test the performance for change vhost queue size
> + #
> + self.queue_number = 2
> + testcmd = self.target + "/app/testpmd -c %s -n %d --socket-mem
> 1024,1024" + \
> + " --vdev 'net_vhost0,iface=vhost-net,queues=2' --
> -i --rxq=1 --txq=1 --nb-cores=1"
> + self.coremask = utils.create_mask(self.cores)
> + testcmd_start = testcmd % (self.coremask, self.memory_channel)
> +
> + self.vhost_user = self.dut.new_session(suite="user")
> +
> + self.vhost_user.send_expect("cd /root/dpdk", "#", 120)
> + self.vhost_user.send_expect(testcmd_start, "testpmd> ", 120)
> + self.vhost_user.send_expect("set fwd mac", "testpmd> ", 120)
> + self.vhost_user.send_expect("start", "testpmd> ", 120)
> +
> + self.start_onevm()
> +
> + self.get_vm_coremask()
> + self.vm_dut.send_expect(self.vm_testpmd_vector % self.vm_coremask,
> "testpmd>", 20)
> + self.vm_dut.send_expect("set fwd mac", "testpmd>", 20)
> + self.vm_dut.send_expect("start", "testpmd>")
> + self.vhost_user.send_expect("clear port stats all", "testpmd> ",
> 120)
> +
> + self.send_scapy("vhost queue < virtio queue")
> +
> + self.vhost_user.send_expect("stop", "testpmd>", 20)
> + self.vhost_user.send_expect("port stop all", "testpmd>")
> + self.vhost_user.send_expect("port config all rxq 2", "testpmd>",
> 20)
> + self.vhost_user.send_expect("port config all txq 2", "testpmd>")
> + self.vhost_user.send_expect("port start all", "testpmd>", 20)
> + self.vhost_user.send_expect("start", "testpmd>")
> + self.vhost_user.send_expect("clear port stats all", "testpmd>")
> +
> + self.send_scapy("vhost queue = virtio queue")
> +
> + self.vm_dut.kill_all()
> + self.vhost_user.send_expect("quit", "# ", 120)
> +
> + def tear_down(self):
> + #
> + # Run after each test case.
> + # Clear vhost-switch and qemu to avoid blocking the following TCs
> + #
> + if getattr(self, 'vhost_user', None):
> + self.dut.close_session(self.vhost_user)
> + self.vm.stop()
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> --
> 2.7.4
More information about the dts
mailing list