[dts] [PATCH] test_plans/pvp_multi_paths_virtio_single_core_performance: add virtio1.1 inorder path test case

[Tu, Lijuan]

.git/rebase-apply/patch:28: trailing whitespace.
Includes mergeable, normal, vector_rx, inorder mergeable,
warning: 1 line adds whitespace errors.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, April 3, 2019 12:04 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH]
> test_plans/pvp_multi_paths_virtio_single_core_performance: add virtio1.1
> inorder path test case
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> add virtio1.1 inorder path test in
> pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
> ---
>  ...rtio_single_core_performance_test_plan.rst | 80 ++++++++++---------
>  1 file changed, 43 insertions(+), 37 deletions(-)
> 
> diff --git
> a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rs
> t
> index 5c64d5d..198b643 100644
> ---
> a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_pla
> +++ n.rst
> @@ -30,24 +30,26 @@
>     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
>     OF THE POSSIBILITY OF SUCH DAMAGE.
> 
> -========================================
> -PVP multi-paths virtio single core Tests -
> ========================================
> +=========================================================
> +vhost/virtio pvp multi-paths virtio single core test plan
> +=========================================================
> 
>  Description
>  ===========
> 
> -Benchmark PVP virtio single core performance with 7 TX/RX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder -no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> -For virtio single core test,give 2 cores for vhost and 1 core for virtio, use io
> fwd at vhost side to lower the vhost workload.
> +Benchmark pvp virtio single core performance with 8 tx/rx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> +Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side to lower
> the vhost workload.
> 
> -Test Case 1: virtio single core performance test with Virtio 1.1 mergeable
> path -
> ================================================================
> ===============
> +Test flow
> +=========
> 
> -flow:
>  TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
> +Test Case 1: virtio single core performance test with virtio 1.1
> +mergeable path
> +===============================================================
> ========
> +========
> +
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -60,18 +62,15 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,mrg_rxbuf=1,in_order=0 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 2: virtio single core performance test with Virtio 1.1 no-mergeable
> path -
> ================================================================
> ==================
> -
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 2: virtio single core performance test with virtio 1.1 normal
> +path
> +===============================================================
> ========
> +=====
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
> @@ -85,19 +84,16 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,mrg_rxbuf=0,in_order=0 \
>      -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 3: virtio single core performance test with Inorder mergeable path
> +Test Case 3: virtio single core performance test with inorder mergeable
> +path
> 
> ================================================================
> ============
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -117,12 +113,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 4: virtio single core performance test with Inorder no-mergeable
> path
> +Test Case 4: virtio single core performance test with inorder
> +no-mergeable path
> 
> ================================================================
> ===============
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -142,12 +135,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 5: virtio single core performance test with Mergeable path
> +Test Case 5: virtio single core performance test with mergeable path
> 
> ================================================================
> ====
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -167,12 +157,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 6: virtio single core performance test with Normal path
> +Test Case 6: virtio single core performance test with normal path
> 
> ================================================================
> =
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -192,12 +179,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> 
> -Test Case 7: virtio single core performance test with Vector_RX path
> +Test Case 7: virtio single core performance test with vector_rx path
> 
> ================================================================
> ====
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> -
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
> @@ -216,3 +200,25 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
>      >start
> 
>  3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 8: virtio single core performance test with virtio 1.1
> +inorder path
> +===============================================================
> ========
> +======
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=2 --txd=1024 --rxd=1024
> +    testpmd>set fwd io
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1