[dts] [PATCH V1] test_plans/scatter: test plan revise

[Xu, Qian Q]

Zhe, you may set some MACRO here instead of the absolute number. 

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Wan, Zhe
> Sent: Thursday, April 11, 2019 2:38 PM
> To: Tu, Lijuan <lijuan.tu at intel.com>; dts at dpdk.org
> Subject: Re: [dts] [PATCH V1] test_plans/scatter: test plan revise
> 
> Hi Lijuan,
> About the addition of '--tx-offloads=0x00008000', the background is DPDK-5618
> (https://jira.devtools.intel.com/browse/DPDK-5618).
> The test plan didn't updated accordingly.
> 
> commit 3743153fac89b821959fbb882058bf81177b07e7.
> Author: xu,gang <gangx.xu at intel.com>
> Date:   Tue Jul 10 10:49:58 2018 +0800
> 
>     tests/scatter: fix selected wrong vector path on ixgbe
> 
>     When no tx offload enabled, ixgbe will chose vector path which can not
>     support scatter. After enabling DEV_TX_OFFLOAD_MULTI_SEGS options, can
>     avoid this problem.
> 
>     Signed-off-by: xu,gang <gangx.xu at intel.com>
> 
> https://mails.dpdk.org/archives/dts/2018-July/004208.html
> 
> This TX offload capability defined in DPDK code
> 'dpdk/lib/librte_ethdev/rte_ethdev.h'
> #define DEV_TX_OFFLOAD_MULTI_SEGS	0x00008000    /**< Device supports
> multi segment send. */
> 
> 
> Thanks!
> BR,
> Wan,Zhe
> 
> -----Original Message-----
> From: Tu, Lijuan
> Sent: Thursday, April 04, 2019 1:30 AM
> To: Wan, Zhe <zhe.wan at intel.com>; dts at dpdk.org
> Cc: Wan, Zhe <zhe.wan at intel.com>
> Subject: RE: [dts] [PATCH V1] test_plans/scatter: test plan revise
> 
> Hi zhe,
> 
> Could you please kindly add some interpretation about why is --tx-
> offloads=0x00008000 ?
> 
> thanks
> 
> > -----Original Message-----
> > From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Zhe
> > Sent: Friday, March 29, 2019 9:30 AM
> > To: dts at dpdk.org
> > Cc: Wan, Zhe <zhe.wan at intel.com>
> > Subject: [dts] [PATCH V1] test_plans/scatter: test plan revise
> >
> > From: Zhe Wan <zhe.wan at intel.com>
> >
> > Signed-off-by: Zhe Wan <zhe.wan at intel.com>
> > ---
> >  test_plans/scatter_test_plan.rst | 27 ++++++++++++---------------
> >  1 file changed, 12 insertions(+), 15 deletions(-)
> >
> > diff --git a/test_plans/scatter_test_plan.rst
> > b/test_plans/scatter_test_plan.rst
> > index cf5e1e5..ed1aaaa 100644
> > --- a/test_plans/scatter_test_plan.rst
> > +++ b/test_plans/scatter_test_plan.rst
> > @@ -72,15 +72,15 @@ the CRC from the packet before returning it.
> >  As a whole, the following packet lengths (CRC included) must be
> > tested to check all packet memory configurations:
> >
> > -#. packet length < mbuf data buffer size
> > +1) packet length < mbuf data buffer size
> >
> > -#. packet length = mbuf data buffer size
> > +2) packet length = mbuf data buffer size
> >
> > -#. packet length = mbuf data buffer size + 1
> > +3) packet length = mbuf data buffer size + 1
> >
> > -#. packet length = mbuf data buffer size + 4
> > +4) packet length = mbuf data buffer size + 4
> >
> > -#. packet length = mbuf data buffer size + 5
> > +5) packet length = mbuf data buffer size + 5
> >
> >  In cases 1) and 2), the hardware RX engine stores the packet data and
> > the CRC  in a single buffer.
> > @@ -101,21 +101,18 @@ Assuming that ports ``0`` and ``1`` of the test
> > target are directly connected  to a Traffic Generator, launch the
> > ``testpmd`` application with the following
> >  arguments::
> >
> > -  ./build/app/testpmd -cffffff -n 3 -- -i --rxd=1024 --txd=1024 \
> > -  --burst=144 --txpt=32 --txht=8 --txwt=8 --txfreet=0 --rxfreet=64 \
> > -  --mbcache=200 --portmask=0x3 --mbuf-size=1024
> > +  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 \
> > +  -- -i --mbcache=200 --mbuf-size=2048 --portmask=0x1 \
> > +  --max-pkt-len=9000 --port-topology=loop --tx-offloads=0x00008000
> >
> >  The -n command is used to select the number of memory channels. It
> > should match  the number of memory channels on that setup.
> >
> > -Setting the size of the mbuf data buffer to 1024 makes 1025-bytes
> > input packets -(CRC included) and larger packets to be stored in two
> > buffers by the hardware -RX engine.
> > -
> > -Test Case: Mbuf 1024 traffic
> > +Test Case: Scatter Mbuf 2048
> >  ============================
> >
> >  Start packet forwarding in the ``testpmd`` application with the
> > ``start`` command.
> > -Send 5 packets of lengths (CRC included) 1023, 1024, 1025, 1028, and 1029.
> > +Send 5 packets,the lengths are mbuf-size + offset (CRC included).
> > +The offset are -1, 0, 1, 4, 5 respectively.
> >  Check that the same amount of frames and bytes are received back by
> > the Traffic -Generator from its port connected to the target's port 1.
> > +Generator from it's port connected to the target's port 1.
> > --
> > 1.8.3.1