[dts] [PATCH v1] test_plans/pvp_multi_paths_performance: add virtio1.1 inorder path test

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Wednesday, April 3, 2019 6:16 PM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH v1] test_plans/pvp_multi_paths_performance: add
> virtio1.1 inorder path test
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
> ---
>  .../pvp_multi_paths_performance_test_plan.rst | 142 +++++++++++-------
>  1 file changed, 86 insertions(+), 56 deletions(-)
> 
> diff --git a/test_plans/pvp_multi_paths_performance_test_plan.rst
> b/test_plans/pvp_multi_paths_performance_test_plan.rst
> index 524adf2..6eac68b 100644
> --- a/test_plans/pvp_multi_paths_performance_test_plan.rst
> +++ b/test_plans/pvp_multi_paths_performance_test_plan.rst
> @@ -30,29 +30,32 @@
>     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
>     OF THE POSSIBILITY OF SUCH DAMAGE.
> 
> -=====================================
> -PVP multi-paths performance Tests
> -=====================================
> +==================================================
> +vhost/virtio pvp multi-paths performance test plan
> +==================================================
> 
>  Description
>  ===========
> 
> -Benchmark PVP multi-paths performance with 7 TX/RX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder -no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +Benchmark pvp multi-paths performance with 8 tx/rx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
>  Give 1 core for vhost and virtio respectively.
> 
> -Test Case 1: pvp test with Virtio 1.1 mergeable path -
> ================================================================
> =======
> +Test flow
> +=========
> 
> -flow:
>  TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
> +Test Case 1: pvp test with virtio 1.1 mergeable path
> +====================================================
> +
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-3  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -60,24 +63,24 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> -    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> 
> -Test Case 2: pvp test with Virtio 1.1 no-mergeable path -
> ================================================================
> =======
> +    testpmd>show port stats all
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 2: pvp test with virtio 1.1 normal path
> +=================================================
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-3  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -85,24 +88,24 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> 
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
> -    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> -    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> 
> -Test Case 3: pvp test with Inorder mergeable path -
> ================================================================
> =======
> +    testpmd>show port stats all
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 3: pvp test with inorder mergeable path
> +=================================================
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-3  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -111,23 +114,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
>      --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> -    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> 
> -Test Case 4: pvp test with Inorder no-mergeable path -
> ================================================================
> =======
> +    testpmd>show port stats all
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 4: pvp test with inorder no-mergeable path
> +====================================================
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -136,23 +139,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
>      --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> -    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> 
> -Test Case 5: pvp test with Mergeable path -
> ================================================================
> =======
> +    testpmd>show port stats all
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 5: pvp test with mergeable path
> +=========================================
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -161,23 +164,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
>      --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> -    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> 
> -Test Case 6: pvp test with Normal path
> -
> ================================================================
> =======
> +    testpmd>show port stats all
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 6: pvp test with normal path
> +======================================
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -186,23 +189,23 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC -->
> TG
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
>      --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> -    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1
> + --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> 
> -Test Case 7: pvp test with Vector_RX path -
> ================================================================
> =======
> +    testpmd>show port stats all
> 
> -flow:
> -TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +Test Case 7: pvp test with vector_rx path
> +=========================================
> 
>  1. Bind one port to igb_uio, then launch vhost by below command::
> 
>      rm -rf vhost-net*
>      ./testpmd -n 4 -l 2-4  --socket-mem 1024,1024 --legacy-mem \
> -    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
>      testpmd>set fwd mac
>      testpmd>start
> 
> @@ -211,8 +214,35 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
>      ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
>      --legacy-mem --no-pci --file-prefix=virtio \
>      --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> -    -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
> +    -- -i --tx-offloads=0x0 --nb-cores=1 --txd=1024 --rxd=1024
>      >set fwd mac
>      >start
> 
> -3. Send packet with packet generator with different packet size, check the
> throughput.
> \ No newline at end of file
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> +    testpmd>show port stats all
> +
> +Test Case 8: pvp test with virtio 1.1 inorder path
> +==================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -n 4 -l 2-3  --socket-mem 1024,1024 --legacy-mem \
> +    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
> +    -- -i --nb-cores=1 --txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> +    --legacy-mem --no-pci --file-prefix=virtio \
> +    --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> +    >set fwd mac
> +    >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 128, 256, 512, 1024, 1518], check the throughput with below command::
> +
> +    testpmd>show port stats all
> --
> 2.17.1