[dts] [PATCH V1] tests/rxtx_offload: optimize script
Tu, Lijuan
lijuan.tu at intel.com
Tue Aug 6 10:45:32 CEST 2019
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Wenjie Li
> Sent: Wednesday, August 7, 2019 12:47 AM
> To: dts at dpdk.org
> Cc: Li, WenjieX A <wenjiex.a.li at intel.com>
> Subject: [dts] [PATCH V1] tests/rxtx_offload: optimize script
>
> optimize script:
> 1. add more supportted nics
> 2. check ports link status before send packets
>
> ---
> tests/TestSuite_rxtx_offload.py | 36 ++++++++++++++++++++++++---------
> 1 file changed, 27 insertions(+), 9 deletions(-)
>
> diff --git a/tests/TestSuite_rxtx_offload.py b/tests/TestSuite_rxtx_offload.py
> index bcef69d..a08e023 100644
> --- a/tests/TestSuite_rxtx_offload.py
> +++ b/tests/TestSuite_rxtx_offload.py
> @@ -87,8 +87,10 @@ class TestRxTx_Offload(TestCase):
> Run at the start of each test suite.
> New rx tx offload API Prerequisites
> """
> + # Support i40e/ixgbe NICs
> self.verify(self.nic in ["fortville_eagle", "fortville_spirit","fortville_25g",
> - "fortville_spirit_single", "niantic"], "NIC Unsupported: "
> + str(self.nic))
> + "fortville_spirit_single", "fortpark_TLV",
> + "niantic", "twinpond", "sagepond",
> + "sageville"], "NIC Unsupported: " + str(self.nic))
> # Based on h/w type, choose how many ports to use
> self.dut_ports = self.dut.get_ports(self.nic)
> # Verify that enough ports are available @@ -116,6 +118,18 @@ class
> TestRxTx_Offload(TestCase):
> """
> pass
>
> +
> + def verify_link_up(self, max_delay=10):
> + ports = self.dut.get_ports(self.nic)
> + for port_id in range(len(ports)):
> + out = self.dut.send_expect("show port info %s" % port_id, "testpmd>
> ")
> + port_time_up = 0
> + while (port_time_up <= max_delay) and ("Link status: down" in out):
> + time.sleep(1)
> + out = self.dut.send_expect("show port info %s" % port_id,
> "testpmd> ")
> + port_time_up += 1
> + self.verify("Link status: down" not in out, "Port %s Link
> + down, please check your link" % port_id)
> +
> def check_port_capability(self, rxtx):
> """
> Check capabilities.
> @@ -147,6 +161,7 @@ class TestRxTx_Offload(TestCase):
>
> result_config = self.dut.send_expect("port start 0", "testpmd> ")
> self.verify("Fail" not in result_config, "Fail to configure port")
> + self.verify_link_up(20)
>
> if rxtx == "rx":
> outstring = self.dut.send_expect("show port 0 rx_offload
> configuration", "testpmd> ") @@ -173,6 +188,7 @@ class
> TestRxTx_Offload(TestCase):
>
> result_config = self.dut.send_expect("port start 0", "testpmd> ")
> self.verify("Fail" not in result_config, "Fail to configure port")
> + self.verify_link_up(20)
>
> acl_offloads = []
> if rxtx == "rx":
> @@ -204,6 +220,7 @@ class TestRxTx_Offload(TestCase):
> Send packet and get the queue which packet enter.
> """
> self.dut.send_expect("start", "testpmd> ")
> + self.verify_link_up(20)
> self.tester.scapy_foreground()
> self.tester.scapy_append(packet)
> self.tester.scapy_execute()
> @@ -221,6 +238,7 @@ class TestRxTx_Offload(TestCase):
> Sends packets and check the flag.
> """
> self.dut.send_expect("start", "testpmd>")
> + self.verify_link_up(20)
> self.tester.scapy_foreground()
> self.tester.scapy_append(packet)
> self.tester.scapy_execute()
> @@ -245,6 +263,7 @@ class TestRxTx_Offload(TestCase):
> self.verify("Fail" not in result_config, "Fail to configure port")
>
> self.dut.send_expect("start", "testpmd> ")
> + self.verify_link_up(20)
> self.tester.scapy_foreground()
> self.tester.scapy_append(packet)
> self.tester.scapy_execute()
> @@ -369,8 +388,8 @@ class TestRxTx_Offload(TestCase):
> """
> Set Rx offload by queue.
> """
> - # Only support NNT
> - self.verify(self.nic in ["niantic"], "%s nic not support rx offload setting
> by queue." % self.nic)
> + # Only support ixgbe NICs
> + self.verify(self.nic in ["niantic", "twinpond", "sagepond",
> + "sageville"], "%s nic not support rx offload setting by queue." %
> + self.nic)
>
> self.pmdout.start_testpmd("%s" % self.cores, "--rxq=4 --txq=4")
> self.dut.send_expect("set fwd rxonly", "testpmd> ") @@ -425,10 +444,9
> @@ class TestRxTx_Offload(TestCase):
> self.dut.send_expect("set fwd txonly", "testpmd> ")
> self.dut.send_expect("set verbose 1", "testpmd> ")
> if (self.nic in ["fortville_eagle", "fortville_spirit","fortville_25g",
> - "fortville_spirit_single"]):
> + "fortville_spirit_single", "fortpark_TLV"]):
> self.dut.send_expect("port stop 0", "testpmd> ")
> self.dut.send_expect("port config 0 tx_offload mbuf_fast_free off",
> "testpmd> ")
> - #self.dut.send_expect("port start 0", "testpmd> ")
> self.check_port_config("tx", "NULL")
> self.start_tcpdump(self.tester_itf0)
> self.dut.send_expect("start", "testpmd> ") @@ -469,12 +487,12 @@
> class TestRxTx_Offload(TestCase):
> "fortville_spirit_single", "fortpark_TLV"]):
> self.dut.send_expect("port stop 0", "testpmd> ")
> self.dut.send_expect("port config 0 tx_offload mbuf_fast_free off",
> "testpmd> ")
> - self.dut.send_expect("port start 0", "testpmd> ")
> offload = ["vlan_insert"]
> self.check_port_config("tx", offload)
> self.dut.send_expect("port stop 0", "testpmd> ")
> self.dut.send_expect("tx_vlan set 0 1", "testpmd> ")
> self.dut.send_expect("port start 0", "testpmd> ")
> + self.verify_link_up(20)
> self.start_tcpdump(self.tester_itf0)
> self.dut.send_expect("start", "testpmd> ")
> self.dut.send_expect("stop", "testpmd> ") @@ -531,7 +549,7 @@ class
> TestRxTx_Offload(TestCase):
> """
> self.pmdout.start_testpmd("%s" % self.cores, "--rxq=4 --txq=4")
> capabilities = self.check_port_capability("tx")
> - # Disable per queue capability first, if it is FVL.
> + # Disable per queue capability first, if it is FVL/Fortpark.
> if (self.nic in ["fortville_eagle", "fortville_spirit","fortville_25g",
> "fortville_spirit_single", "fortpark_TLV"]):
> self.dut.send_expect("port stop 0", "testpmd> ") @@ -550,9 +568,9
> @@ class TestRxTx_Offload(TestCase):
> """
> Set Rx offload by queue.
> """
> - # Only support FVL
> + # Only support i40e NICs
> self.verify(self.nic in ["fortville_eagle", "fortville_spirit","fortville_25g",
> - "fortville_spirit_single",], "%s nic not support rx offload
> setting by queue." % self.nic)
> + "fortville_spirit_single",
> + "fortpark_TLV"], "%s nic not support rx offload setting by queue." %
> + self.nic)
> # Check offload configuration by port and by queue.
> self.pmdout.start_testpmd("%s" % self.cores, "--rxq=4 --txq=4")
> offload = ["mbuf_fast_free"]
> --
> 2.17.1
More information about the dts
mailing list