[dts] [PATCH V1]test_plans/pmd_stacked_bonded: update test plan

[yufengmx]

port start all action implies the race condition. The right way is to start
top level bond port only, and let it propagate the start action to slave bond ports
and its the real nics.

Signed-off-by: yufengmx <yufengx.mo at intel.com>
---
 test_plans/pmd_stacked_bonded_test_plan.rst | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/test_plans/pmd_stacked_bonded_test_plan.rst b/test_plans/pmd_stacked_bonded_test_plan.rst
index be0da9a..a864f1f 100644
--- a/test_plans/pmd_stacked_bonded_test_plan.rst
+++ b/test_plans/pmd_stacked_bonded_test_plan.rst
@@ -41,7 +41,7 @@ based on RRC. The customer already uses Mellanox 100G NICs. Mellanox 100G NICs
 support a proper x16 PCIe interface so the host sees a single netdev and that
 netdev corresponds directly to the 100G Ethernet port. They indicated that in
 their current system they bond multiple 100G NICs together, using DPDK bonding
-API in their application. They are interested in looking at an alternatve source
+API in their application. They are interested in looking at an alternative source
 for the 100G NIC and are in conversation with Silicom who are shipping a 100G
 RRC based NIC (something like Boulder Rapids). The issue they have with RRC NIC
 is that the NIC presents as two PCIe interfaces (netdevs) instead of one. If the
@@ -140,9 +140,9 @@ steps
     testpmd> show bonding config 3
     testpmd> show bonding config 4
 
-#. start all ports to check ports start action::
+#. start top level bond port to check ports start action::
 
-    testpmd> port start all
+    testpmd> port start 4
     testpmd> start
 
 #. close testpmd::
@@ -194,9 +194,9 @@ steps
     testpmd> add bonding slave 3 4
     testpmd> show bonding config 4
 
-#. start all bonded device ports::
+#. start top level bond port::
 
-    testpmd> port start all
+    testpmd> port start 4
     testpmd> start
 
 #. send 100 tcp packets to portA 0 and portA 1::
@@ -260,9 +260,9 @@ steps
     testpmd> add bonding slave 5 6
     testpmd> show bonding config 6
 
-#. start all ports::
+#. start top level bond port::
 
-    testpmd> port start all
+    testpmd> port start 6
     testpmd> start
 
 #. send 100 packets to portA 0/portA 0a/portA 1/portA 1a separately::
@@ -317,9 +317,9 @@ steps
     testpmd> add bonding slave 3 4
     testpmd> show bonding config 4
 
-#. start all ports::
+#. start top level bond port::
 
-    testpmd> port start all
+    testpmd> port start 4
     testpmd> start
 
 #. send 100 packets to portA 0 and portA 1::
@@ -385,9 +385,9 @@ steps
     testpmd> add bonding slave 5 6
     testpmd> show bonding config 6
 
-#. start all ports::
+#. start top level bond port::
 
-    testpmd> port start all
+    testpmd> port start 6
     testpmd> start
 
 #. send 100 packets to portA 0/portA 0a/portA 1/portA 1a separately::
-- 
1.9.3