[dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to support VXLAN case

zhiwei.he zhiwei.he at intel.com
Thu Aug 29 07:46:28 CEST 2019


From: "zhiwei.he" <zhiwei.he at intel.com>

Signed-off-by: zhiwei.he <zhiwei.he at intel.com>
---
 tests/TestSuite_vxlan.py | 76 +++++++++++++++++++++++++++++-------------------
 1 file changed, 46 insertions(+), 30 deletions(-)

diff --git a/tests/TestSuite_vxlan.py b/tests/TestSuite_vxlan.py
index ecc3f3a..3bc8071 100644
--- a/tests/TestSuite_vxlan.py
+++ b/tests/TestSuite_vxlan.py
@@ -266,6 +266,8 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
             self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
         elif self.nic in ["sageville", "sagepond"]:
             self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
+        elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
+           print "CVL support default none VECTOR"
         else:
             self.verify(False, "%s not support this vxlan" % self.nic)
         # Based on h/w type, choose how many ports to use
@@ -533,13 +535,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
         """
         verify vxlan packet detection
         """
-        out = self.dut.send_expect("cat config/common_base", "]# ", 10)
-        src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
-        if src_vec_model == 'y':
-            self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
-                                + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
-            self.dut.skip_setup = False
-            self.dut.build_install_dpdk(self.target)
+        if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+           print "CVL support default none VECTOR"
+           src_vec_model = 'n'
+        else:
+           out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+           src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+           if src_vec_model == 'y':
+              self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+                                  + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
+              self.dut.skip_setup = False
+              self.dut.build_install_dpdk(self.target)
 
         
         pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
@@ -571,26 +577,33 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
 
         out = self.dut.send_expect("stop", "testpmd>", 10)
         self.dut.send_expect("quit", "#", 10)
-        
-        out = self.dut.send_expect("cat config/common_base", "]# ", 10)
-        dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
-        if src_vec_model != dst_vec_model:
-            self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
-                                + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
-            self.dut.skip_setup = False
-            self.dut.build_install_dpdk(self.target)
+        if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+           print "CVL support default none VECTOR"
+           src_vec_model = 'n'
+        else:
+           out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+           dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+           if src_vec_model != dst_vec_model:
+              self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+                                  + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
+              self.dut.skip_setup = False
+              self.dut.build_install_dpdk(self.target)
 
     def test_vxlan_ipv6_detect(self):
         """
         verify vxlan packet detection with ipv6 header
         """
-        out = self.dut.send_expect("cat config/common_base", "]# ", 10)
-        src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
-        if src_vec_model == 'y':
-            self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
-                                + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
-            self.dut.skip_setup = False
-            self.dut.build_install_dpdk(self.target)
+        if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+           print "CVL support default none VECTOR"
+           src_vec_model = 'n'
+        else:
+           out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+           src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+           if src_vec_model == 'y':
+              self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+                                  + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
+              self.dut.skip_setup = False
+              self.dut.build_install_dpdk(self.target)
 
         pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
             "%(CHANNEL)d -- -i --disable-rss --rxq=4 --txq=4" + \
@@ -625,14 +638,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
 
         out = self.dut.send_expect("stop", "testpmd>", 10)
         self.dut.send_expect("quit", "#", 10)
-
-        out = self.dut.send_expect("cat config/common_base", "]# ", 10)
-        dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
-        if src_vec_model != dst_vec_model:
-            self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
-                                + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
-            self.dut.skip_setup = False
-            self.dut.build_install_dpdk(self.target)
+        if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+           print "CVL support default none VECTOR"
+           src_vec_model = 'n'
+        else:
+           out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+           dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+           if src_vec_model != dst_vec_model:
+              self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+                                  + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
+              self.dut.skip_setup = False
+              self.dut.build_install_dpdk(self.target)
 
     def test_vxlan_ipv4_checksum_offload(self):
         """
-- 
1.8.3.1



More information about the dts mailing list