[dts] [PATCH V2] tests/sriov_kvm: restart testpmd if execute special cmd in cases
Zhang, YanX A
yanx.a.zhang at intel.com
Thu Dec 5 03:15:34 CET 2019
Tested-by: Zhang, YanX A <yanx.a.zhang at intel.com>
-----Original Message-----
From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lihong
Sent: Thursday, December 5, 2019 2:47 AM
To: dts at dpdk.org
Cc: Ma, LihongX <lihongx.ma at intel.com>
Subject: [dts] [PATCH V2] tests/sriov_kvm: restart testpmd if execute special cmd in cases
if testpmd execute special cmd which maybe effect other cases, restart testpmd
Signed-off-by: lihong <lihongx.ma at intel.com>
---
tests/TestSuite_sriov_kvm.py | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/tests/TestSuite_sriov_kvm.py b/tests/TestSuite_sriov_kvm.py index 546b01c..54148af 100644
--- a/tests/TestSuite_sriov_kvm.py
+++ b/tests/TestSuite_sriov_kvm.py
@@ -51,6 +51,8 @@ class TestSriovKvm(TestCase):
self.dut.send_expect('modprobe vfio-pci', '#')
self.setup_2vm_2vf_env_flag = 0
self.setup_2vm_prerequisite_flag = 0
+ self.vm0_testpmd = None
+ self.vm1_testpmd = None
self.setup_2vm_2vf_env()
def set_up(self):
@@ -482,6 +484,12 @@ class TestSriovKvm(TestCase):
self.vm0_testpmd.execute_cmd('stop')
self.vm1_testpmd.execute_cmd('stop')
else:
+ if self.vm0_testpmd:
+ self.vm0_testpmd.quit()
+ self.vm0_testpmd = None
+ if self.vm1_testpmd:
+ self.vm1_testpmd.quit()
+ self.vm1_testpmd = None
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
@@ -532,7 +540,8 @@ class TestSriovKvm(TestCase):
self.vm0_testpmd.execute_cmd("set promisc all off")
self.vm0_testpmd.execute_cmd('start')
- self.setup_2vm_prerequisite_flag = 1
+ # restart testpmd after this cases, because in this case have set some special cmd
+ self.setup_2vm_prerequisite_flag = 0
time.sleep(2)
vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
@@ -715,6 +724,7 @@ class TestSriovKvm(TestCase):
self.verify(vm1_ret_stats['RX-packets'] == packet_num * 2, "Vlan mirror failed between VM0 and VM1!")
def test_two_vms_vlan_and_pool_mirror(self):
+ self.setup_2vm_prerequisite_flag = 0
self.vm0_testpmd.execute_cmd('vlan set strip on 0')
self.vm1_testpmd.execute_cmd('vlan set strip on 0')
port_id_0 = 0
@@ -755,11 +765,11 @@ class TestSriovKvm(TestCase):
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
- self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], 10 * packet_num),
- "Vlan mirror failed between VM0 and VM1 when set vlan and pool mirror!")
self.host_testpmd.execute_cmd(
'rx_vlan rm %d port %d vf %s' % (vlan_id, port_id_0, vf_mask))
self.reset_port_all_mirror_rule(port_id_0)
+ self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], 10 * packet_num),
+ "Vlan mirror failed between VM0 and VM1 when set
+ vlan and pool mirror!")
def test_two_vms_uplink_and_downlink_mirror(self):
"""
@@ -893,6 +903,7 @@ class TestSriovKvm(TestCase):
vf_num = 0
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for vf_mac in ["00:11:22:33:44:55", "00:55:44:33:22:11"]:
if self.nic.startswith('niantic') or self.nic.startswith('sage'):
set_mac_cmd = "mac_addr add port %d vf %d %s"
@@ -924,6 +935,7 @@ class TestSriovKvm(TestCase):
self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
+ self.setup_2vm_prerequisite_flag = 0
port_id_0 = 0
vf_mac = "00:11:22:33:44:55"
packet_num = 10
@@ -975,6 +987,7 @@ class TestSriovKvm(TestCase):
port_id_0 = 0
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for vf_mac in ["00:55:44:33:22:11", "00:55:44:33:22:66"]:
self.host_testpmd.execute_cmd("set port %d uta %s on" %
(port_id_0, vf_mac)) @@ -1002,6 +1015,7 @@ class TestSriovKvm(TestCase):
self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
+ self.setup_2vm_prerequisite_flag = 0
port_id_0 = 0
vf_mac = "00:55:44:33:22:11"
packet_num = 10
@@ -1039,6 +1053,7 @@ class TestSriovKvm(TestCase):
self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
+ self.setup_2vm_prerequisite_flag = 0
port_id_0 = 0
packet_num = 10
@@ -1080,6 +1095,7 @@ class TestSriovKvm(TestCase):
port_id_0 = 0
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d vf 0 tx %s" %
(port_id_0, switch)) @@ -1114,6 +1130,7 @@ class TestSriovKvm(TestCase):
vf_mac = "FF:FF:FF:FF:FF:FF"
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d vf 0 rxmode BAM %s" %
(port_id_0, switch))
--
2.7.4
More information about the dts
mailing list