[dts] [PATCH V1 1/2] test_plans/metering_and_policing: modify the test command for softnic

[Tu, Lijuan]

Applied the series.

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Friday, December 6, 2019 8:25 AM
> To: dts at dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao at intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/metering_and_policing: modify the
> test command for softnic
> 
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao at intel.com>
> ---
>  .../metering_and_policing_test_plan.rst       | 32 +++++++++----------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/test_plans/metering_and_policing_test_plan.rst
> b/test_plans/metering_and_policing_test_plan.rst
> index 9e41fad..95648f7 100644
> --- a/test_plans/metering_and_policing_test_plan.rst
> +++ b/test_plans/metering_and_policing_test_plan.rst
> @@ -145,8 +145,8 @@ Bind them to dpdk igb_uio driver,
>    ::
> 
>      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 \
> -    --vdev
> 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli,cpu_id=1,conn_po
> rt=8086' \
> -    -- -i --forward-mode=softnic --portmask=0x10
> +    --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
> +    -- -i --portmask=0x10 --disable-rss
>      testpmd> start
> 
>  3. start softnic with default hierarchy Qos with following command line, @@
> -154,8 +154,8 @@ Bind them to dpdk igb_uio driver,
>    ::
> 
>      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 \
> -    --vdev
> 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli,cpu_id=1,conn_po
> rt=8086' \
> -    -- -i --forward-mode=softnic --portmask=0x10
> +    --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
> +    -- -i --portmask=0x10 --disable-rss
>      testpmd> set port tm hierarchy default 1
>      testpmd> start
> 
> @@ -173,7 +173,7 @@ Test Case 1: ipv4 ACL table RFC2698 GYR
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
> 
> @@ -225,7 +225,7 @@ Test Case 2: ipv4 ACL table RFC2698 GYD
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -273,7 +273,7 @@ Test Case 3: ipv4 ACL table RFC2698 GDR
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -324,7 +324,7 @@ Test Case 4: ipv4 ACL table RFC2698 DYR
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -374,7 +374,7 @@ Test Case 5: ipv4 ACL table RFC2698 DDD
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -421,7 +421,7 @@ Test Case 6: ipv4 with same CBS and PBS GDR
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -461,7 +461,7 @@ Test Case 7: ipv4 HASH table RFC2698
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table,
>    ::
> @@ -496,7 +496,7 @@ Test Case 8: ipv6 ACL table RFC2698
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table,
>    ::
> @@ -548,7 +548,7 @@ Test Case 9: multiple meter and profile
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=4 -
> -txq=4 --portmask=0x10
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4
> + --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=4 --txq=4 --portmask=0x10 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -643,7 +643,7 @@ Test Case 10: ipv4 RFC2698 pre-colored red by DSCP
> table
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -730,7 +730,7 @@ Test Case 11: ipv4 RFC2698 pre-colored yellow by
> DSCP table
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> @@ -819,7 +819,7 @@ Test Case 12: ipv4 RFC2698 pre-colored green by
> DSCP table
> 
>    ::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_
> firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 -
> -txq=2 --portmask=0x4
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
> + 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
> + ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
> 
>    Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
>    ::
> --
> 2.17.1