[dts] [PATCH]test_plans: remove --tx-offload from commandline

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Peng Yuan
> Sent: Monday, December 9, 2019 11:11 AM
> To: dts at dpdk.org
> Cc: Peng, Yuan <yuan.peng at intel.com>
> Subject: [dts] [PATCH]test_plans: remove --tx-offload from commandline
> 
> remove --tx-offloads from testpmd commandline in macsec_test_plan.rst
> 
> Signed-off-by: Peng Yuan <yuan.peng at intel.com>
> 
> diff --git a/test_plans/macsec_for_ixgbe_test_plan.rst
> b/test_plans/macsec_for_ixgbe_test_plan.rst
> index 79b7d57..997f921 100644
> --- a/test_plans/macsec_for_ixgbe_test_plan.rst
> +++ b/test_plans/macsec_for_ixgbe_test_plan.rst
> @@ -151,7 +151,7 @@ Test Case 1: MACsec packets send and receive
>    1. Start the testpmd of tx port::
> 
>        ./testpmd -c 0xf0 --socket-mem 1024,0 --file-prefix=tx -w 0000:07:00.0 \
> -      -- -i --port-topology=chained --tx-offloads=0x00002000
> +      -- -i --port-topology=chained
> 
>    2. Set MACsec offload on::
> 
> @@ -352,10 +352,7 @@ Test Case 5: normal packet send and MACsec
> receive  Test Case 6: MACsec send and receive with wrong parameters
> ==========================================================
> 
> -1. Don't add "--tx-offloads=0x00002000" in the tx_port command line.
> -   The MACsec offload can't work. The tx packets are normal packets.
> -
> -2. Set different pn on rx and tx port, then start the data transfer.
> +1. Set different pn on rx and tx port, then start the data transfer.
> 
>    1. Set the parameters as test case 1, start and stop the data transfer.
>       Check the result, rx port can receive and decrypt the packets normally.
> @@ -368,7 +365,7 @@ Test Case 6: MACsec send and receive with wrong
> parameters
> 
>        out_pkts_encrypted = in_pkts_late + in_pkts_ok
> 
> -3. Set different keys on rx and tx port, then start the data transfer::
> +2. Set different keys on rx and tx port, then start the data transfer::
> 
>        the RX-packets=0,
>        in_octets_decrypted == out_octets_encrypted, @@ -376,20 +373,23 @@
> Test Case 6: MACsec send and receive with wrong parameters
>        in_pkts_ok=0,
>        rx_good_packets=0
> 
> -4. Set different pi on rx and tx port, then start the data transfer::
> +3. Set different pi on rx and tx port, then start the data transfer::
> 
>        in_octets_decrypted == out_octets_encrypted,
>        in_pkts_ok = 0,
>        in_pkts_nosci == out_pkts_encrypted
> 
> -5. Set different an on rx and tx port, then start the data transfer::
> +   note: pi only support changed on rx side, if change pi on tx side,
> +         it will be omitted.
> +
> +4. Set different an on rx and tx port, then start the data transfer::
> 
>        rx_good_packets=0,
>        in_octets_decrypted == out_octets_encrypted,
>        in_pkts_notusingsa == out_pkts_encrypted,
>        in_pkts_ok=0,
> 
> -6. Set different index on rx and tx port, then start the data transfer::
> +5. Set different index on rx and tx port, then start the data transfer::
> 
>        in_octets_decrypted == out_octets_encrypted,
>        in_pkts_ok == out_pkts_encrypted
> @@ -404,7 +404,7 @@ Test Case 7: performance test of MACsec offload
> packets
>     MACsec offload on, set fwd mac::
> 
>        ./testpmd -c 0xf --socket-mem 1024,0 -- -i \
> -      --port-topology=chained --tx-offloads=0x00002000
> +      --port-topology=chained
>        testpmd> set macsec offload 0 on encrypt on replay-protect on
>        testpmd> set fwd mac
>        testpmd> start
> @@ -423,7 +423,7 @@ Test Case 7: performance test of MACsec offload
> packets
>     Start two testpmd::
> 
>        ./testpmd -c 0xf --socket-mem 1024,0 --file-prefix=rx -w 0000:07:00.1 \
> -      -- -i --port-topology=chained --tx-offloads=0x00002000
> +      -- -i --port-topology=chained
> 
>        testpmd> set macsec offload 0 on encrypt on replay-protect on
>        testpmd> set macsec sc rx 0 00:00:00:00:00:01 0 @@ -433,7 +433,7 @@
> Test Case 7: performance test of MACsec offload packets
>        testpmd> set fwd rxonly
> 
>        ./testpmd -c 0xf0 --socket-mem 1024,0 --file-prefix=tx -b 0000:07:00.1 \
> -      -- -i --port-topology=chained --tx-offloads=0x00002000
> +      -- -i --port-topology=chained
> 
>        testpmd> set macsec offload 1 on encrypt on replay-protect on
>        testpmd> set macsec sc rx 1 00:00:00:00:00:02 0
> --
> 2.17.1