[dts] [PATCH] tests: add the common script for all cryptodev test_suite
Zhao, XinfengX
xinfengx.zhao at intel.com
Sat Feb 2 08:51:37 CET 2019
Tested-by : Xinfeng Zhao <xinfengx.zhao at intel.com>
-----Original Message-----
From: Zhao, XinfengX
Sent: Saturday, February 2, 2019 3:23 PM
To: dts at dpdk.org
Cc: Zhao, XinfengX <xinfengx.zhao at intel.com>
Subject: [dts][PATCH] tests: add the common script for all cryptodev test_suite
add tests/cryptodev_common.py
Signed-off-by: Xinfeng Zhao <xinfengx.zhao at intel.com>
---
tests/cryptodev_common.py | 170 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 170 insertions(+)
create mode 100644 tests/cryptodev_common.py
diff --git a/tests/cryptodev_common.py b/tests/cryptodev_common.py new file mode 100644 index 0000000..5570f7a
--- /dev/null
+++ b/tests/cryptodev_common.py
@@ -0,0 +1,170 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+def build_dpdk_with_cryptodev(test_case):
+ # Rebuild the dpdk with cryptodev pmds
+ snow3g_lib_path = "/root/libsso_snow3g/snow3g/"
+ if "snow3g_lib_path" in test_case.get_suite_cfg():
+ snow3g_lib_path = test_case.get_suite_cfg()["snow3g_lib_path"]
+
+ zuc_lib_path = "/root/libsso_zuc.1.0.1.1-8/zuc"
+ if "zuc_lib_path" in test_case.get_suite_cfg():
+ zuc_lib_path = test_case.get_suite_cfg()["zuc_lib_path"]
+
+ kasumi_lib_path = "/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/"
+ if "kasumi_lib_path" in test_case.get_suite_cfg():
+ kasumi_lib_path = test_case.get_suite_cfg()["kasumi_lib_path"]
+
+ test_case.dut.send_expect(
+ "export LIBSSO_SNOW3G_PATH={}".format(snow3g_lib_path), "#")
+ test_case.dut.send_expect(
+ "export LIBSSO_ZUC_PATH={}".format(zuc_lib_path), "#")
+ test_case.dut.send_expect(
+ "export LIBSSO_KASUMI_PATH={}".format(kasumi_lib_path), "#")
+
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i
+ 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
+ config/common_base", "# ")
+
+ test_case.dut.skip_setup = False
+ test_case.dut.build_install_dpdk(test_case.dut.target)
+
+
+def bind_qat_device(test_case, driver = "igb_uio"):
+ if not driver:
+ test_case.logger.error("Please configure the driver of qat device to bind")
+ if driver == 'vfio-pci':
+ test_case.dut.send_expect('modprobe vfio-pci', '#', 10)
+
+ if "crypto_dev_id" in test_case.get_suite_cfg():
+ crypto_dev_id = test_case.get_suite_cfg()["crypto_dev_id"]
+ else:
+ crypto_dev_id = "443"
+ test_case.logger.info("crypto device id: " + crypto_dev_id)
+
+ # Bind QAT VF devices
+ out = test_case.dut.send_expect("lspci -d:{}|awk '{{print $1}}'".format(crypto_dev_id), "# ", 10)
+ crypto_list = out.replace("\r", "\n").replace("\n\n", "\n").split("\n")
+ test_case._crypto_pci = crypto_list[0]
+ test_case.dut.send_expect(
+ 'echo "8086 {}" > /sys/bus/pci/drivers/{}/new_id'.format(crypto_dev_id, driver), "# ", 10)
+ for line in crypto_list:
+ cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(
+ line, line.replace(":", "\:"))
+ test_case.dut.send_expect(cmd, "# ", 10)
+ cmd = "echo 0000:{} > /sys/bus/pci/drivers/{}/bind".format(
+ line, driver)
+ test_case.dut.send_expect(cmd, "# ", 10)
+
+
+def clear_dpdk_config(test_case):
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y$/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/' config/common_base", "# ")
+ test_case.dut.send_expect(
+ "sed -i
+'s/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
+config/common_base", "# ")
+
+
+default_eal_opts = {
+ "c": None,
+ "l": None,
+ "w": None,
+ "vdev": None,
+ "socket-mem": "512,512",
+ "n": "4"
+}
+
+
+def get_eal_opt_str(test_case, override_eal_opts={}):
+ return get_opt_str(test_case, default_eal_opts, override_eal_opts)
+
+
+def get_opt_str(test_case, default_opts, override_opts={}):
+ opts = default_opts.copy()
+
+ # Update options with test suite/case config file
+ for key in opts.keys():
+ if key in test_case.get_case_cfg():
+ opts[key] = test_case.get_case_cfg()[key]
+
+ # Update options with func input
+ opts.update(override_opts)
+
+ # Generate option string
+ opt_str = ""
+ for key,value in opts.items():
+ if value is None:
+ continue
+ dash = "-" if len(key) == 1 else "--"
+ opt_str = opt_str + "{0}{1} {2} ".format(dash, key, value)
+
+ return opt_str
+
+
+def get_dpdk_app_cmd_str(app_path, eal_opt_str, app_opt_str=None):
+ if not app_opt_str:
+ return "{0} {1}".format(app_path, eal_opt_str)
+ return "{0} {1} -- {2}".format(app_path, eal_opt_str, app_opt_str)
+
+
+def is_test_skip(test_case):
+ if "test_skip" in test_case.get_case_cfg() \
+ and test_case.get_case_cfg()["test_skip"] == "Y":
+ test_case.logger.info("Test Skip is YES")
+ return True
+
+
+def is_build_skip(test_case):
+ if "build_skip" in test_case.get_suite_cfg() \
+ and test_case.get_suite_cfg()["build_skip"] == "Y":
+ test_case.logger.info("Build Skip is YES")
+ return True
--
2.7.4
More information about the dts
mailing list