[dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency

Yao, Lei A lei.a.yao at intel.com
Wed Feb 13 07:25:02 CET 2019



> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Yinan
> Sent: Monday, January 28, 2019 10:35 AM
> To: dts at dpdk.org
> Cc: Wang, Yinan <yinan.wang at intel.com>
> Subject: [dts] [PATCH 2/3]
> test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan
> of PVP multi-paths for vhost max efficiency
> 
> From: Wang Yinan <yinan.wang at intel.com>
> 
> Signed-off-by: Wang Yinan <yinan.wang at intel.com>
Acked-by: Lei Yao <lei.a.yao at intel.com>
> ---
>  ...host_single_core_performance_test_plan.rst | 211
> ++++++++++++++++++
>  1 file changed, 211 insertions(+)
>  create mode 100644
> test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
> 
> diff --git
> a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.r
> st
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.
> rst
> new file mode 100644
> index 0000000..eff73f5
> --- /dev/null
> +++
> b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.
> rst
> @@ -0,0 +1,211 @@
> +.. Copyright (c) <2019>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=====================================
> +PVP multi-paths vhost single core Tests
> +=====================================
> +
> +Description
> +===========
> +
> +Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
> +Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
> +no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io
> fwd at virtio side to lower the virtio workload.
> +
> +Test Case 1: vhost single core performance test with Virtio 1.1 mergeable
> path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 2: vhost single core performance test with Virtio 1.1 no-
> mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 3: vhost single core performance test with Inorder mergeable
> path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 4: vhost single core performance test with Inorder no-mergeable
> path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=1,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 5: vhost single core performance test with Mergeable path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=1 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 6: vhost single core performance test with Normal path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> +
> +Test Case 7: vhost single core performance test with Vector_RX path
> +=========================================================
> ==============
> +
> +flow:
> +TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> +    rm -rf vhost-net*
> +    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> +    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> +    testpmd>set fwd mac
> +    testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> +    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> +    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=0 \
> +    -- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
> +    >set fwd io
> +    >start
> +
> +3. Send packet with packet generator with different packet size, check the
> throughput.
> --
> 2.17.1



More information about the dts mailing list