[dts] [PATCH] test_plans: Add case to veb_switch_test_plan

[Peng Yuan]

Add a case to veb_switch_test_plan.rst

Signed-off-by: Peng Yuan <yuan.peng at intel.com>

diff --git a/test_plans/veb_switch_test_plan.rst b/test_plans/veb_switch_test_plan.rst
index e2520d4..e849732 100644
--- a/test_plans/veb_switch_test_plan.rst
+++ b/test_plans/veb_switch_test_plan.rst
@@ -91,7 +91,7 @@ Prerequisites for VEB testing
 
 4. Bind the VFs to dpdk driver::
 
-   ./tools/dpdk-devbind.py -b igb_uio 05:02.0 05:02.1
+   ./tools/dpdk-devbind.py -b vfio-pci 05:02.0 05:02.1
 
 5. Reserve huge pages memory(before using DPDK)::
 
@@ -100,9 +100,36 @@ Prerequisites for VEB testing
     mkdir /mnt/huge
     mount -t hugetlbfs nodev /mnt/huge
 
+Test Case: VEB Switching Inter VF-VF switch
+===========================================
 
-Test Case1: VEB Switching Inter VF-VF MAC switch
-================================================
+Summary: Kernel PF, then create 2VFs. VFs running dpdk testpmd,
+send traffic from VF1 to VF2 with VF2's MAC as DEST address,
+check if VF2 can receive the packets. Check Inter VF-VF MAC switch.
+
+Details:
+
+1. In VF1, run testpmd::
+
+    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem 1024,1024
+    -w 05:02.0 --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
+    testpmd>set fwd txonly
+    testpmd>set promisc all off
+    testpmd>start
+
+   In VF2, run testpmd::
+
+    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xa -n 4 --socket-mem 1024,1024
+    -w 05:02.1 --file-prefix=test2 -- -i --crc-strip
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
+
+2. Send packets from VF1 to VF2's MAC address, check if VF2 can get all the packets.
+Check the packet content is no corrupted.
+
+Test Case: VEB Switching Inter VF-VF switch MAC forword
+=======================================================
 
 Summary: Kernel PF, then create 2VFs. VFs running dpdk testpmd, send traffic
 to VF1, and set the packet's DEST MAC to VF2, check if VF2 can receive the
@@ -112,30 +139,29 @@ Details:
 
 1. In VF1, run testpmd::
 
-      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem 1024,1024
-      -w 05:02.0 --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
-      testpmd>set fwd mac
-      testpmd>set promisc all off
-      testpmd>start
+    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem 1024,1024
+    -w 05:02.0 --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
+    testpmd>set fwd mac
+    testpmd>set promisc all off
+    testpmd>start
 
    In VF2, run testpmd::
 
-      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xa -n 4 --socket-mem 1024,1024
-      -w 05:02.1 --file-prefix=test2 -- -i --crc-strip
-      testpmd>set fwd mac
-      testpmd>set promisc all off
-      testpmd>start
-
+    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xa -n 4 --socket-mem 1024,1024
+    -w 05:02.1 --file-prefix=test2 -- -i --crc-strip
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
 
 2. Send 100 packets to VF1's MAC address, check if VF2 can get 100 packets.
 Check the packet content is no corrupted.
 
-Test Case2: VEB Switching Inter VF-VF MAC/VLAN switch
-=====================================================
+Test Case: VEB Switching Inter VF-VF MAC/VLAN switch
+====================================================
 
-Summary: Kernel PF, then create 2VFs, assign VF1 with VLAN=1 in, VF2 with
+Summary: Kernel PF, then create 2VFs, assign VF1 with VLAN=1, VF2 with
 VLAN=2. VFs are running dpdk testpmd, send traffic to VF1 with VLAN=1,
-then let it forwards to VF2,it should not work since they are not in the
+then let it forward to VF2, it should not work since they are not in the
 same VLAN; set VF2 with VLAN=1, then send traffic to VF1 with VLAN=1,
 and VF2 can receive the packets. Check inter VF MAC/VLAN switch.
 
@@ -143,24 +169,24 @@ Details:
 
 1. Set the VLAN id of VF1 and VF2::
 
-      ip link set ens785f0 vf 0 vlan 1
-      ip link set ens785f0 vf 1 vlan 2
+    ip link set ens785f0 vf 0 vlan 1
+    ip link set ens785f0 vf 1 vlan 2
 
 2. In VF1, run testpmd::
 
-      ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -w 0000:05:02.0
-      --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
-      testpmd>set fwd mac
-      testpmd>set promisc all off
-      testpmd>start
+    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -w 0000:05:02.0
+    --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
+    testpmd>set fwd mac
+    testpmd>set promisc all off
+    testpmd>start
 
    In VF2, run testpmd::
 
-      ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -w 0000:05:02.1
-      --file-prefix=test2 -- -i --crc-strip
-      testpmd>set fwd rxonly
-      testpmd>set promisc all off
-      testpmd>start
+    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -w 0000:05:02.1
+    --file-prefix=test2 -- -i --crc-strip
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
 
 4. Send 100 packets with VF1's MAC address and VLAN=1, check if VF2 can't
    get 100 packets since they are not in the same VLAN.
@@ -173,66 +199,104 @@ Details:
    100 packets since they are in the same VLAN now. Check the packet
    content is not corrupted::
 
-     sendp([Ether(dst="00:11:22:33:44:11")/Dot1Q(vlan=1)/IP()
-     /Raw('x'*40)],iface="ens785f1")
+    sendp([Ether(dst="00:11:22:33:44:11")/Dot1Q(vlan=1)/IP()
+    /Raw('x'*40)],iface="ens785f1")
 
 
-Test Case3: VEB Switching Inter PF-VF MAC switch
-================================================
+Test Case: VEB Switching Inter PF-VF MAC switch
+===============================================
 
-Summary: DPDK PF, then create 1VF, PF in the host running dpdk testpmd,
-send traffic from PF to VF1, ensure PF->VF1(let VF1 in promisc mode);
-send traffic from VF1 to PF,ensure VF1->PF can work.
+Summary: DPDK PF, then create 2VFs, PF in the host running dpdk testpmd, VFs
+running dpdk testpmd, VF1 send traffic to VF2, check if VF2 can receive
+the packets. send tracfic from PF to VF1, ensure PF->VF1; send traffic
+from VF1 to PF, ensure VF1->PF can work.
 
 Details:
 
 1. vf->pf
-   In host, launch testpmd::
+   PF, launch testpmd::
+
+    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -w 0000:05:00.0 --file-prefix=test1 -- -i
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
 
-      ./testpmd -c 0x3 -n 4 -- -i
-      testpmd>set fwd rxonly
-      testpmd>set promisc all off
-      testpmd>start
+   VF1, run testpmd::
 
-   In VM1, run testpmd::
+    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -w 0000:05:02.0 --file-prefix=test2 -- -i --eth-peer=0,pf_mac_addr
+    testpmd>set fwd txonly
+    testpmd>set promisc all off
+    testpmd>start
 
-      ./testpmd -c 0x3 -n 4 -- -i --eth-peer=0,pf_mac_addr
-      testpmd>set fwd txonly
-      testpmd>set promisc all off
-      testpmd>start
+   Check if PF can get the packets, so VF1->PF is working.
+   Check the packet content is not corrupted.
 
 2. pf->vf
-   In host, launch testpmd::
+   PF, launch testpmd::
+
+    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -w 0000:05:00.0 --file-prefix=test1 -- -i --eth-peer=0,vf1_mac_addr
+    testpmd>set fwd txonly
+    testpmd>set promisc all off
+    testpmd>start
 
-      ./testpmd -c 0x3 -n 4 -- -i --eth-peer=0,vf1_mac_addr
-      testpmd>set fwd txonly
-      testpmd>set promisc all off
-      testpmd>start
+   VF1, run testpmd::
 
-   In VM1, run testpmd::
+    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -w 0000:05:02.0 --file-prefix=test2 -- -i
+    testpmd>mac_addr add 0 vf1_mac_addr
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
 
-      ./testpmd -c 0x3 -n 4 -- -i
-      testpmd>mac_addr add 0 vf1_mac_addr
-      testpmd>set fwd rxonly
-      testpmd>set promisc all off
-      testpmd>start
+   Check if VF1 can get the packets, so PF->VF1 is working.
+   Check the packet content is not corrupted.
 
 3. tester->vf
+   PF, launch testpmd::
 
-4. Send 100 packets with PF's MAC address from VF, check if PF can get 100
-   packets, so VF1->PF is working. Check the packet content is not corrupted.
+    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -w 0000:05:00.0 --file-prefix=test1 -- -i
+    testpmd>set fwd mac
+    testpmd>set promisc all off
+    testpmd>start
 
-5. Send 100 packets with VF's MAC address from PF, check if VF1 can get 100
-   packets, so PF->VF1 is working. Check the packet content is not corrupted.
+   VF1, run testpmd::
 
-6. Send 100 packets with VF's MAC address from tester, check if VF1 can get
+    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -w 0000:05:02.0 --file-prefix=test2 -- -i
+    testpmd>mac_addr add 0 vf1_mac_addr
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
+
+   Send 100 packets with VF's MAC address from tester, check if VF1 can get
    100 packets, so tester->VF1 is working. Check the packet content is not
    corrupted.
 
+4. vf1->vf2
+   PF, launch testpmd::
+
+    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -w 0000:05:00.0 --file-prefix=test1 -- -i
+    testpmd>set promisc all off
+
+   VF1, run testpmd::
+
+    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -w 0000:05:02.0 --file-prefix=test2 -- -i --eth-peer=0,vf2_mac_addr
+    testpmd>set fwd txonly
+    testpmd>set promisc all off
+    testpmd>start
+
+   VF2, run testpmd::
+
+    ./testpmd -c 0xf00 -n 4 --socket-mem 1024,1024 -w 0000:05:02.1 --file-prefix=test3 -- -i
+    testpmd>mac_addr add 0 vf2_mac_addr
+    testpmd>set fwd rxonly
+    testpmd>set promisc all off
+    testpmd>start
+
+   Check if VF2 can get the packets, so VF1->VF2 is working.
+   Check the packet content is not corrupted.
 
-Test Case4: VEB Switching Inter-VM PF-VF/VF-VF MAC switch Performance
-=====================================================================
+Test Case: VEB Switching Inter-VM PF-VF/VF-VF MAC switch Performance
+====================================================================
 
-Performance testing, repeat Testcase1 (VF-VF) and Testcase3 (PF-VF) to check
+Performance testing, repeat Testcase1 (VF-VF) and Testcase4 (PF-VF) to check
 the performance at different sizes(64B--1518B and jumbo frame--3000B)
 with 100% rate sending traffic
-- 
2.5.0