[dts] [PATCH V1 1/2] add tests/metering_and_policing script
Peng, Yuan
yuan.peng at intel.com
Thu Feb 21 10:54:20 CET 2019
Hi wenjie,
Some comments inline.
Thanks.
Yuan.
-----Original Message-----
From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Wenjie Li
Sent: Thursday, February 21, 2019 3:17 PM
To: dts at dpdk.org
Cc: Li, WenjieX A <wenjiex.a.li at intel.com>
Subject: [dts] [PATCH V1 1/2] add tests/metering_and_policing script
Signed-off-by: Wenjie Li <wenjiex.a.li at intel.com>
---
tests/TestSuite_metering_and_policing.py | 514 +++++++++++++++++++++++
1 file changed, 514 insertions(+)
create mode 100644 tests/TestSuite_metering_and_policing.py
diff --git a/tests/TestSuite_metering_and_policing.py b/tests/TestSuite_metering_and_policing.py
new file mode 100644
index 0000000..488e23f
--- /dev/null
+++ b/tests/TestSuite_metering_and_policing.py
@@ -0,0 +1,514 @@
+#BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test metering_and_policing.
+"""
+import utils
+import string
+import time
+import re
+from test_case import TestCase
+from plotting import Plotting
+from settings import HEADER_SIZE
+from dut import Dut
+
+
+class TestMeteringAndPolicing(TestCase):
+
+ def copy_config_files_to_dut(self):
+ """
+ Copy firmware.cli, dscp_*.sh from tester to DUT.
+ """
+ file = 'meter_and_policy_config.tar.gz'
+ src_file = r'./dep/%s' % file
+ dst1 = '/tmp'
+ dst2 = '/root/dpdk/drivers/net/softnic'
+ self.dut.session.copy_file_to(src_file, dst1)
+ self.dut.send_expect("tar xf %s/%s -C %s" % (dst1, file, dst2),
+ "#", 30)
+
+ def update_firmware_cli(self, caseID):
+ """
+ Update firmware.cli.
+ """
+ self.ori_firmware_cli = "/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli"
+ if len(self.dut_ports) == 4:
+ self.ori_firmware_cli = "/root/dpdk/drivers/net/softnic/meter_and_policing_firmware_4ports.cli"
+ self.new_firmware_cli = "%s-%s" % (self.ori_firmware_cli, caseID)
+ self.dut.send_expect("rm -f %s" % self.new_firmware_cli, "#")
+ self.dut.send_expect("cp %s %s" % (self.ori_firmware_cli,
+ self.new_firmware_cli), "#")
+
+ # link dev
+ self.dut.send_expect("sed -i -e 's/^.*link LINK0 dev.*$/link LINK0 dev %s/g' %s"
+ % (self.dut_p0_pci, self.new_firmware_cli), "#")
+ self.dut.send_expect("sed -i -e 's/^.*link LINK1 dev.*$/link LINK1 dev %s/g' %s"
+ % (self.dut_p1_pci, self.new_firmware_cli), "#")
+ if len(self.dut_ports) == 4:
+ self.dut.send_expect("sed -i -e 's/^.*link LINK2 dev.*$/link LINK2 dev %s/g' %s"
+ % (self.dut_p2_pci, self.new_firmware_cli), "#")
+ self.dut.send_expect("sed -i -e 's/^.*link LINK3 dev.*$/link LINK3 dev %s/g' %s"
+ % (self.dut_p3_pci,
+ self.new_firmware_cli), "#")
+
+ # table action
+ temp = "table action profile AP0"
+ if caseID == 8:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s ipv6 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s"
+ % (temp, temp, self.new_firmware_cli), "#")
+ else:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s ipv4 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s"
+ % (temp, temp, self.new_firmware_cli),
+ "#")
+
+ # pipeline RX table
+ temp = "pipeline RX table match"
+ if caseID == 7:
+ target = "hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 65K action AP0"
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s %s/g' %s"
+ % (temp, temp, target, self.new_firmware_cli), "#")
+ elif caseID == 8:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s acl ipv6 offset 270 size 4K action AP0/g' %s"
+ % (temp, temp, self.new_firmware_cli), "#")
+ else:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s acl ipv4 offset 270 size 4K action AP0/g' %s"
+ % (temp, temp, self.new_firmware_cli),
+ "#")
+
+ # use .sh file as RX table
+ temp = "pipeline RX table 0 dscp"
+ if caseID == 10:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_red.sh/g' %s"
+ % (temp, temp, self.new_firmware_cli), "#")
+ elif caseID == 11:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_yellow.sh/g' %s"
+ % (temp, temp, self.new_firmware_cli), "#")
+ elif caseID == 12:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_green.sh/g' %s"
+ % (temp, temp, self.new_firmware_cli), "#")
+ elif caseID == 13:
+ self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_default.sh/g' %s"
+ % (temp, temp, self.new_firmware_cli),
+ "#")
+
+ # thread * pipeline RX/TX enable
+ self.dut.send_expect("sed -i -e 's/thread 5 pipeline RX enable/thread %d pipeline RX enable/g' %s"
+ % (len(self.dut_ports), self.new_firmware_cli), "#")
+ self.dut.send_expect("sed -i -e 's/thread 5 pipeline TX enable/thread %d pipeline TX enable/g' %s"
+ % (len(self.dut_ports),
[yuan]:
If it is not the "5" in the pipeline, the command can't be executed.
+ self.new_firmware_cli), "#")
+
+ def start_testpmd(self, filename):
+ """
+ Start testpmd.
+ """
+ if len(self.dut_ports) == 2:
+ portmask = "0x4"
+ Corelist = "0x7"
+ Servicecorelist = "0x4"
+ if len(self.dut_ports) == 4:
+ portmask = "0x10"
+ Corelist = "0x1f"
+ Servicecorelist = "0x10"
+ self.path = "./%s/app/testpmd" % self.target
+ cmd = self.path + " -c %s -s %s -n %d --vdev 'net_softnic0,firmware=%s,cpu_id=0,conn_port=8086' \
+ -- -i --rxq=%d --txq=%d --portmask=%s" \
+ % (Corelist, Servicecorelist, self.dut.get_memory_channels(), filename, self.port_id, self.port_id, portmask)
+ self.dut.send_expect(cmd, "testpmd>", 60)
+
+ def add_port_meter_profile(self, profile_id, cbs=400, pbs=500):
+ """
+ Add port meter profile (trTCM rfc2968).
+ """
+ cir = 3125000000
+ pir = 3125000000
+ self.dut.send_expect("add port meter profile trtcm_rfc2698 %d %d %d %d %d %d"
+ % (self.port_id, profile_id, cir, pir,
+ cbs, pbs), "testpmd>")
+
+ def create_port_meter(self, mtr_id, profile_id, gyrd_action):
+ """
+ Create new meter object for the ethernet device.
+ """
+ self.dut.send_expect("create port meter %d %d %d yes %s"
+ % (self.port_id, mtr_id, profile_id,
+ gyrd_action), "testpmd>")
+
+ def create_flow_rule(self, ret_id, ip_ver, protocol, spec_id, mtr_id, queue_index_id):
+ """
+ Create flow rule based on port meter.
+ """
+ if ip_ver == "ipv4":
+ src_mask = "255.255.255.255"
+ dst_mask = "255.255.255.255"
+ src_ip = "1.10.11.12"
+ dst_ip = "2.20.21.22"
+ if ip_ver == "ipv6":
+ src_mask = "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
+ dst_mask = "0:0:0:0:0:0:0:0"
+ src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789"
+ dst_ip = "0:0:0:0:0:0:0:0"
+ protocol = protocol.lower()
+ if protocol == "tcp":
+ proto_id = 6
+ if protocol == "udp":
+ proto_id = 17
+ if protocol == "sctp":
+ proto_id = 132
+
+ out = self.dut.send_expect("flow create %d group 0 ingress pattern eth / %s proto mask 255 src mask %s dst mask"
+ " %s src spec %s dst spec %s proto spec %d / %s src mask 65535 dst mask 65535 src "
+ "spec %d dst spec %d / end actions meter mtr_id %d / queue index %d / end"
+ % (self.port_id, ip_ver, src_mask, dst_mask, src_ip, dst_ip, proto_id, protocol,
+ spec_id, spec_id, mtr_id, queue_index_id), "testpmd>")
+ if ret_id == 1:
+ self.verify("Flow rule #" in out, "flow create fail")
+ else:
+ self.verify("METER: Meter already attached to a flow: Invalid argument" in out,
+ "flow create should fail, but NOT failed")
+
+ def scapy_send_packet(self, ip_ver, protocol, fwd_port, pktsize):
+ """
+ Send a packet to port
+ """
+ source_port = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
+ protocol = protocol.upper()
+ if ip_ver == "ipv4":
+ src_ip = "1.10.11.12"
+ dst_ip = "2.20.21.22"
+ tag = "IP"
+ if protocol == "TCP":
+ proto_str = "proto=6"
+ if protocol == "UDP":
+ proto_str = "proto=17"
+ if protocol == "SCTP":
+ proto_str = "proto=132"
+
+ if ip_ver == "ipv6":
+ src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789"
+ dst_ip = "2001::1"
+ tag = "IPv6"
+ if protocol == "TCP":
+ proto_str = "nh=6"
+ if protocol == "UDP":
+ proto_str = "nh=17"
+
+ self.tester.scapy_append(
+ 'sendp([Ether(dst="%s")/%s(src="%s",dst="%s",%s)/%s(sport=%d,dport=%d)/Raw(load="P"*%d)], iface="%s")'
+ % (self.dut_p0_mac, tag, src_ip, dst_ip, proto_str, protocol, fwd_port, fwd_port, pktsize, source_port))
+ self.tester.scapy_execute()
+
+ def send_packet_and_check(self, ip_ver, protocol, fwd_port, pktsize, expect_port):
+ """
+ Send packet and check the stats
+ """
+ time.sleep(3)
+ rx_before = []
+ tx_before = []
+ for i in range(0, len(self.dut_ports)):
+ output = self.dut.send_expect("show port stats %d" %(i),"testpmd>")
+ rx_before.append(re.compile('RX-packets:\s+(.*?)\s+?').findall(output, re.S))
+
+ tx_before.append(re.compile('TX-packets:\s+(.*?)\s+?').findall(output,
+ re.S))
+
+ self.scapy_send_packet(ip_ver, protocol, fwd_port, pktsize)
+
+ rx_after = []
+ tx_after = []
+ for i in range(0, len(self.dut_ports)):
+ output = self.dut.send_expect("show port stats %d" %(i),"testpmd>")
+ rx_after.append(re.compile('RX-packets:\s+(.*?)\s+?').findall(output, re.S))
+
+ tx_after.append(re.compile('TX-packets:\s+(.*?)\s+?').findall(output,
+ re.S))
+
+ rx_packets_port = []
+ tx_packets_port = []
+ for i in range(0, len(self.dut_ports)):
+ temp1 = int(rx_after[i][0]) - int(rx_before[i][0])
+ temp2 = int(tx_after[i][0]) - int(tx_before[i][0])
+ rx_packets_port.append(temp1)
+ tx_packets_port.append(temp2)
+ print("-"*80)
+ if expect_port == -1:
+ print("expect: Dropped")
+ else:
+ print("expect: port %d" % expect_port)
+ print rx_packets_port
+ print tx_packets_port
+ print("-"*80)
+
+ if expect_port == -1:
+ for i in range(0, len(self.dut_ports)):
+ self.verify(int(rx_packets_port[0]) == 1 and int(tx_packets_port[i]) == 0,
+ "Wrong: the packet is not dropped")
+ else:
+ self.verify(int(rx_packets_port[0]) == int(tx_packets_port[expect_port]) == 1,
+ "Wrong: can't forward package to port %d " %
+ expect_port)
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports()
+ self.port_nums = 2
+ self.verify(len(self.dut_ports) >= self.port_nums,
+ "Insufficient ports for speed testing")
+
+ self.dut_p0_pci = self.dut.get_port_pci(self.dut_ports[0])
+ self.dut_p1_pci = self.dut.get_port_pci(self.dut_ports[1])
+
+ self.dut_p0_mac = self.dut.get_mac_address(self.dut_ports[0])
+ self.dut_p1_mac = self.dut.get_mac_address(self.dut_ports[1])
+
+ self.pf0_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
+ self.pf1_interface =
+ self.dut.ports_info[self.dut_ports[1]]['intf']
+
+ if len(self.dut_ports) == 4:
+ self.dut_p2_pci = self.dut.get_port_pci(self.dut_ports[2])
+ self.dut_p3_pci = self.dut.get_port_pci(self.dut_ports[3])
+
+ self.dut_p2_mac = self.dut.get_mac_address(self.dut_ports[2])
+ self.dut_p3_mac =
+ self.dut.get_mac_address(self.dut_ports[3])
+
+ self.pf2_interface = self.dut.ports_info[self.dut_ports[2]]['intf']
+ self.pf3_interface =
+ self.dut.ports_info[self.dut_ports[3]]['intf']
+
+ self.port_id = len(self.dut_ports)
+ self.copy_config_files_to_dut()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def run_param(self, cbs, pbs, protocol, head):
+ """
+ Set cbs, pbs and protocol; return the packet size
+ """
[yuan]:
"Protocol" is not used in this function.
+ pkt1 = pbs - head + 1
+ pkt2 = pbs - head
+ pkt3 = cbs - head + 1
+ pkt4 = cbs - head
+ pkt_list = [pkt1,pkt2,pkt3,pkt4]
+ return pkt_list,cbs,pbs
+
+ def run_port_list(self,ip_ver,protocol,fwd_port,pkt_list,port_list):
+ flags = 0
+ for port in port_list:
+ self.send_packet_and_check(ip_ver=ip_ver, protocol=protocol, fwd_port=fwd_port, pktsize=pkt_list[port_list.index(port,flags)], expect_port=port)
+ flags = flags + 1
[yuan]:
Sorry, I don't understand the logic
pkt_list[port_list.index(port,flags)]
+
+ def run_testpmd(self,pkt_list,cbs,pbs,gyrd_action,ip_ver,protocol,queue_id,port_list):
+ self.start_testpmd(self.new_firmware_cli)
+ self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
+ self.create_port_meter(mtr_id=0, profile_id=0, gyrd_action=gyrd_action)
+ self.create_flow_rule(ret_id=1, ip_ver=ip_ver, protocol=protocol, spec_id=2, mtr_id=0, queue_index_id=queue_id)
+ self.dut.send_expect("start", "testpmd>")
+ self.run_port_list(ip_ver,protocol,2,pkt_list,port_list)
+
+ def test_ipv4_ACL_table_RFC2698_GYR(self):
+ """
+ Test Case 1: ipv4 ACL table RFC2698 GYR
+ """
+ self.update_firmware_cli(1)
+ pkt_list,cbs,pbs = self.run_param(400,500,'TCP',40)
[yuan]:
I think you'd better define cbs and pbs instead of as a return value.
+ self.run_testpmd(pkt_list, cbs, pbs, "g y r 0 0 0", "ipv4",
+ "tcp", 0, [0,0,0,0])
+
+ def test_ipv4_ACL_table_RFC2698_GYD(self):
+ """
+ Test Case 2: ipv4 ACL table RFC2698 GYD
+ """
+ self.update_firmware_cli(2)
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40)
+ self.run_testpmd(pkt_list, cbs, pbs, "g y d 0 0 0", "ipv4",
+ "tcp", 0,[-1, 0, 0, 0])
+
+ def test_ipv4_ACL_table_RFC2698_GDR(self):
+ """
+ Test Case 3: ipv4 ACL table RFC2698 GDR
+ """
+ self.update_firmware_cli(3)
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'SCTP', 32)
+ self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4",
+ "sctp", 1,[1, -1, -1, 1])
+
+ def test_ipv4_ACL_table_RFC2698_DYR(self):
+ """
+ Test Case 4: ipv4 ACL table RFC2698 DYR
+ """
+ self.update_firmware_cli(4)
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 28)
+ self.run_testpmd(pkt_list, cbs, pbs, "d y r 0 0 0", "ipv4",
+ "udp", 0, [0, 0, 0, -1])
+
+ def test_ipv4_ACL_table_RFC2698_DDD(self):
+ """
+ Test Case 5: ipv4 ACL table RFC2698 DDD
+ """
+ self.update_firmware_cli(5)
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40)
+ self.run_testpmd(pkt_list, cbs, pbs, "d d d 0 0 0", "ipv4",
+ "tcp", 0, [-1, -1, -1, -1])
+
+ def test_ipv4_with_same_cbs_and_pbs_GDR(self):
+ """
+ Test Case 6: ipv4 with same cbs and pbs GDR
+ """
+ self.update_firmware_cli(6)
+ pkt_list, cbs, pbs = self.run_param(500, 500, 'SCTP', 32)
+ self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4",
+ "sctp", 0, [0,0])
+
+ def test_ipv4_HASH_table_RFC2698(self):
+ """
+ Test Case 7: ipv4 HASH table RFC2698
+ """
+ self.update_firmware_cli(7)
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40)
+ self.run_testpmd(pkt_list, cbs, pbs, "g y r 0 0 0", "ipv4", "tcp", 0, [0, 0, 0, 0])
+ self.dut.send_expect("quit", "#", 30)
+ self.run_testpmd(pkt_list, cbs, pbs, "g y d 0 0 0", "ipv4", "tcp", 0, [-1,0,0,0])
+ self.dut.send_expect("quit", "#", 30)
+ self.run_testpmd(pkt_list, cbs, pbs, "d d d 0 0 0", "ipv4", "tcp", 0, [-1,-1,-1,-1])
+ self.dut.send_expect("quit", "#", 30)
+
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'SCTP', 32)
+ self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", "sctp", 1, [1,-1,-1,1])
+ self.dut.send_expect("quit", "#", 30)
+
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 28)
+ self.run_testpmd(pkt_list, cbs, pbs, "d y r 0 0 0", "ipv4", "udp", 0, [0,0,0,-1])
+ self.dut.send_expect("quit", "#", 30)
+
+
+ def test_ipv6_ACL_table_RFC2698(self):
+ """
+ Test Case 8: ipv6 ACL table RFC2698
+ """
+ self.update_firmware_cli(8)
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 60)
+
+ self.start_testpmd(self.new_firmware_cli)
+ self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
+ self.create_port_meter(mtr_id=0, profile_id=0, gyrd_action="g y d 0 0 0")
+ self.create_port_meter(mtr_id=1, profile_id=0, gyrd_action="d y r 0 0 0")
+ self.create_flow_rule(ret_id=1, ip_ver="ipv6", protocol="tcp", spec_id=2, mtr_id=0, queue_index_id=0)
+ self.create_flow_rule(ret_id=1, ip_ver="ipv6", protocol="udp", spec_id=2, mtr_id=1, queue_index_id=1)
+ self.dut.send_expect("start","testpmd>")
+
+ self.run_port_list("ipv6","tcp",2,pkt_list,[-1,0,0,0])
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 48)
+ self.run_port_list("ipv6", "udp",2, pkt_list, [1,1,1,-1])
+
+ def test_ipv4_multiple_meter_and_profile(self):
+ """
+ Test Case 9: multiple meter and profile
+ """
+ self.update_firmware_cli(9)
+
+ self.start_testpmd(self.new_firmware_cli)
+ self.add_port_meter_profile(profile_id=0, cbs=400, pbs=500)
+ self.add_port_meter_profile(profile_id=1, cbs=300, pbs=400)
+ gyrd_list = ["g y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0", "d d d 0 0 0"]
+ for i in range(len(gyrd_list)):
+ self.create_port_meter(mtr_id=i, profile_id=i * 2 / len(gyrd_list), gyrd_action=gyrd_list[i])
+ for i in range(len(gyrd_list)):
+ self.create_flow_rule(ret_id=1, ip_ver="ipv4", protocol="tcp", spec_id=i, mtr_id=i, queue_index_id=i % len(self.dut_ports))
+ self.create_flow_rule(ret_id=0, ip_ver="ipv4", protocol="tcp",
+ spec_id=len(gyrd_list), mtr_id=len(gyrd_list) - 1, queue_index_id=0)
+
+ self.dut.send_expect("start", "testpmd>")
+ output = self.dut.send_expect("flow list %d" % (self.port_id), "testpmd>")
+ print(output)
+
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40)
+ ports_list = [[0,0,0,0], [-1,1,1,1], [0,-1,-1,0], [1,1,1,-1]]
+ if len(self.dut_ports) == 4:
+ ports_list = [[0,0,0,0], [-1,1,1,1], [2,-1,-1,2], [3,3,3,-1]]
+ for ports in ports_list:
+ self.run_port_list("ipv4", "tcp", ports_list.index(ports),
+ pkt_list, ports)
+
+ pkt_list, cbs, pbs = self.run_param(300, 400, 'TCP', 40)
+ ports_list = [[-1,0,0,0], [1,-1,-1,1], [0,0,0,-1], [-1,-1,-1,-1]]
+ if len(self.dut_ports) == 4:
+ ports_list = [[-1,0,0,0], [1,-1,-1,1], [2,2,2,-1], [-1,-1,-1,-1]]
+ for ports in ports_list:
+ self.run_port_list("ipv4", "tcp", ports_list.index(ports) +
+ 4, pkt_list, ports)
+
+ self.dut.send_expect("quit", "#")
+
+ def run_pre_colored_by_DSCP_table(self,ports_list):
+ """
+ ipv4 RFC2698 pre-colored by DSCP table
+ """
+ pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40)
+ self.start_testpmd(self.new_firmware_cli)
+ self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
+ self.dut.send_expect("start", "testpmd>")
+
+ gyrd_list = ["g y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0"]
+ for gyrd in gyrd_list:
+ self.create_port_meter(mtr_id=gyrd_list.index(gyrd), profile_id=0, gyrd_action=gyrd)
+ self.create_flow_rule(ret_id=1, ip_ver="ipv4", protocol="tcp", spec_id=2, mtr_id=gyrd_list.index(gyrd),
+ queue_index_id=0)
+ self.run_port_list("ipv4", "tcp", 2, pkt_list,
+ ports_list[gyrd_list.index(gyrd)])
+
+ def test_ipv4_RFC2698_pre_colored_red_by_DSCP_table(self):
+ """
+ Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table
+ """
+ self.update_firmware_cli(10)
+ ports_list = [[0, 0, 0, 0], [-1, -1, -1, -1], [0, 0, 0, 0], [0, 0, 0, 0]]
+ self.run_pre_colored_by_DSCP_table(ports_list)
+
+ def test_ipv4_RFC2698_pre_colored_yellow_by_DSCP_table(self):
+ """
+ Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table
+ """
+ self.update_firmware_cli(11)
+ ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0,-1,-1, -1], [0, 0, 0, 0]]
+ self.run_pre_colored_by_DSCP_table(ports_list)
+
+ def test_ipv4_RFC2698_pre_colored_green_by_DSCP_table(self):
+ """
+ Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table
+ """
+ self.update_firmware_cli(12)
+ ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0, -1, -1, 0], [0, 0, 0, -1]]
+ self.run_pre_colored_by_DSCP_table(ports_list)
+
+ def test_ipv4_RFC2698_pre_colored_default_by_DSCP_table(self):
+ """
+ Test Case 13: ipv4 RFC2698 pre-colored by default DSCP table
+ """
+ self.update_firmware_cli(13)
+ ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0, -1, -1, 0], [0, 0, 0, -1]]
+ self.run_pre_colored_by_DSCP_table(ports_list)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.17.2
More information about the dts
mailing list