[dts] [PATCH] tests: add the common script for all cryptodev test_suite

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Saturday, February 2, 2019 3:23 PM
> To: dts at dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao at intel.com>
> Subject: [dts] [PATCH] tests: add the common script for all cryptodev test_suite
> 
> add tests/cryptodev_common.py
> 
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao at intel.com>
> ---
>  tests/cryptodev_common.py | 170
> ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 170 insertions(+)
>  create mode 100644 tests/cryptodev_common.py
> 
> diff --git a/tests/cryptodev_common.py b/tests/cryptodev_common.py new file
> mode 100644 index 0000000..5570f7a
> --- /dev/null
> +++ b/tests/cryptodev_common.py
> @@ -0,0 +1,170 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +#   * Redistributions of source code must retain the above copyright
> +#     notice, this list of conditions and the following disclaimer.
> +#   * Redistributions in binary form must reproduce the above copyright
> +#     notice, this list of conditions and the following disclaimer in
> +#     the documentation and/or other materials provided with the
> +#     distribution.
> +#   * Neither the name of Intel Corporation nor the names of its
> +#     contributors may be used to endorse or promote products derived
> +#     from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +def build_dpdk_with_cryptodev(test_case):
> +    # Rebuild the dpdk with cryptodev pmds
> +    snow3g_lib_path = "/root/libsso_snow3g/snow3g/"
> +    if "snow3g_lib_path" in test_case.get_suite_cfg():
> +        snow3g_lib_path = test_case.get_suite_cfg()["snow3g_lib_path"]
> +
> +    zuc_lib_path = "/root/libsso_zuc.1.0.1.1-8/zuc"
> +    if "zuc_lib_path" in test_case.get_suite_cfg():
> +        zuc_lib_path = test_case.get_suite_cfg()["zuc_lib_path"]
> +
> +    kasumi_lib_path = "/root/LibSSO_0_3_1/isg_cid-
> wireless_libs/ciphers/kasumi/"
> +    if "kasumi_lib_path" in test_case.get_suite_cfg():
> +        kasumi_lib_path = test_case.get_suite_cfg()["kasumi_lib_path"]
> +
> +    test_case.dut.send_expect(
> +        "export LIBSSO_SNOW3G_PATH={}".format(snow3g_lib_path), "#")
> +    test_case.dut.send_expect(
> +        "export LIBSSO_ZUC_PATH={}".format(zuc_lib_path), "#")
> +    test_case.dut.send_expect(
> +        "export LIBSSO_KASUMI_PATH={}".format(kasumi_lib_path), "#")
> +
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESN
> I_MB=y/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n$/CONFIG_RTE_LIBRTE_PMD_QAT_S
> YM=y/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AES
> NI_GCM=y/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENS
> SL=y/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW
> 3G=y/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI
> =y/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> + 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> + config/common_base", "# ")
> +
> +    test_case.dut.skip_setup = False
> +    test_case.dut.build_install_dpdk(test_case.dut.target)
> +
> +
> +def bind_qat_device(test_case, driver = "igb_uio"):
> +    if not driver:
> +        test_case.logger.error("Please configure the driver of qat device to bind")
> +    if driver == 'vfio-pci':
> +        test_case.dut.send_expect('modprobe vfio-pci', '#', 10)
> +
> +    if "crypto_dev_id" in test_case.get_suite_cfg():
> +        crypto_dev_id = test_case.get_suite_cfg()["crypto_dev_id"]
> +    else:
> +        crypto_dev_id = "443"
> +    test_case.logger.info("crypto device id: " + crypto_dev_id)
> +
> +    # Bind QAT VF devices
> +    out = test_case.dut.send_expect("lspci -d:{}|awk '{{print
> $1}}'".format(crypto_dev_id), "# ", 10)
> +    crypto_list = out.replace("\r", "\n").replace("\n\n", "\n").split("\n")
> +    test_case._crypto_pci = crypto_list[0]
> +    test_case.dut.send_expect(
> +        'echo "8086 {}" > /sys/bus/pci/drivers/{}/new_id'.format(crypto_dev_id,
> driver), "# ", 10)
> +    for line in crypto_list:
> +        cmd = "echo 0000:{} >
> /sys/bus/pci/devices/0000\:{}/driver/unbind".format(
> +            line, line.replace(":", "\:"))
> +        test_case.dut.send_expect(cmd, "# ", 10)
> +        cmd = "echo 0000:{} > /sys/bus/pci/drivers/{}/bind".format(
> +            line, driver)
> +        test_case.dut.send_expect(cmd, "# ", 10)
> +
> +
> +def clear_dpdk_config(test_case):
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESN
> I_MB=n/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y$/CONFIG_RTE_LIBRTE_PMD_QAT_S
> YM=n/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AES
> NI_GCM=n/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENS
> SL=n/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW
> 3G=n/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI
> =n/' config/common_base", "# ")
> +    test_case.dut.send_expect(
> +        "sed -i
> +'s/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> +config/common_base", "# ")
> +
> +
> +default_eal_opts = {
> +    "c": None,
> +    "l": None,
> +    "w": None,
> +    "vdev": None,
> +    "socket-mem": "512,512",
> +    "n": "4"
> +}
> +
> +
> +def get_eal_opt_str(test_case, override_eal_opts={}):
> +    return get_opt_str(test_case, default_eal_opts, override_eal_opts)
> +
> +
> +def get_opt_str(test_case, default_opts, override_opts={}):
> +    opts = default_opts.copy()
> +
> +    # Update options with test suite/case config file
> +    for key in opts.keys():
> +        if key in test_case.get_case_cfg():
> +            opts[key] = test_case.get_case_cfg()[key]
> +
> +    # Update options with func input
> +    opts.update(override_opts)
> +
> +    # Generate option string
> +    opt_str = ""
> +    for key,value in opts.items():
> +        if value is None:
> +            continue
> +        dash = "-" if len(key) == 1 else "--"
> +        opt_str = opt_str + "{0}{1} {2} ".format(dash, key, value)
> +
> +    return opt_str
> +
> +
> +def get_dpdk_app_cmd_str(app_path, eal_opt_str, app_opt_str=None):
> +    if not app_opt_str:
> +        return "{0} {1}".format(app_path, eal_opt_str)
> +    return "{0} {1} -- {2}".format(app_path, eal_opt_str, app_opt_str)
> +
> +
> +def is_test_skip(test_case):
> +    if "test_skip" in test_case.get_case_cfg() \
> +       and test_case.get_case_cfg()["test_skip"] == "Y":
> +        test_case.logger.info("Test Skip is YES")
> +        return True
> +
> +
> +def is_build_skip(test_case):
> +    if "build_skip" in test_case.get_suite_cfg() \
> +       and test_case.get_suite_cfg()["build_skip"] == "Y":
> +        test_case.logger.info("Build Skip is YES")
> +        return True
> --
> 2.7.4