[dts] [PATCH V2] Add test plan about l3fwdacl

Tu, Lijuan lijuan.tu at intel.com
Tue Feb 26 09:17:18 CET 2019
Previous message: [dts] [PATCH V2] Add test plan about l3fwdacl
Next message: [dts] [PATCH V4] tests/dual_vlan Change the verify outside the loop
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lihong
> Sent: Saturday, February 2, 2019 3:02 AM
> To: dts at dpdk.org
> Cc: Ma, LihongX <lihongx.ma at intel.com>
> Subject: [dts] [PATCH V2] Add test plan about l3fwdacl
> 
> Signed-off-by: lihong <lihongx.ma at intel.com>
> ---
>  test_plans/l3fwdacl_test_plan.rst | 369
> ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 369 insertions(+)
>  create mode 100644 test_plans/l3fwdacl_test_plan.rst
> 
> diff --git a/test_plans/l3fwdacl_test_plan.rst
> b/test_plans/l3fwdacl_test_plan.rst
> new file mode 100644
> index 0000000..5e5b854
> --- /dev/null
> +++ b/test_plans/l3fwdacl_test_plan.rst
> @@ -0,0 +1,369 @@
> +.. Copyright (c) <2014>, Intel Corporation
> +   All rights reserved.
> +
> +   Redistribution and use in source and binary forms, with or without
> +   modification, are permitted provided that the following conditions
> +   are met:
> +
> +   - Redistributions of source code must retain the above copyright
> +     notice, this list of conditions and the following disclaimer.
> +
> +   - Redistributions in binary form must reproduce the above copyright
> +     notice, this list of conditions and the following disclaimer in
> +     the documentation and/or other materials provided with the
> +     distribution.
> +
> +   - Neither the name of Intel Corporation nor the names of its
> +     contributors may be used to endorse or promote products derived
> +     from this software without specific prior written permission.
> +
> +   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> +   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> +   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> +   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> +   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> +   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> +   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> +   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> +   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> +   OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +======================================
> +Layer-3 Forwarding with Access Control
> +======================================
> +
> +Description
> +===========
> +
> +This document contains the test plan and results for testing
> +``l3fwd-acl`` using the ACL library for access control and L3
> +forwarding.
> +
> +The ``l3fwd-acl`` application uses an IPv4 5-tuple syntax for packet
> +matching. The 5-tuple consist of source IP address, destination IP
> +address, source port, destination port and a protocol identifier.
> +
> +The ``l3fwd-acl`` application supports two types of rules:
> +
> +#. Route information which is used for L3 forwarding.
> +#. An access control list which defines the black list to block.
> +
> +The ``l3fwd-acl`` application needs to load ACL and route rules before
> +running. Route rules are mandatory while ACL rules are optional. After
> +receiving packets from ports, ``l3fwd-acl`` will extract the necessary
> +info from the TCP/IP header of received packets and perform a lookup in
> +a rule database to figure out whether the packets should be dropped (in
> +the ACL range) or forwarded to desired ports.
> +
> +
> +Prerequisites
> +=============
> +
> +1. The DUT has at least 2 DPDK supported IXGBE/I40E NIC ports::
> +
> +    Tester      DUT
> +    eth1  <---> PORT 0
> +    eth2  <---> PORT 1
> +
> +2. Support igb_uio driver::
> +
> +    modprobe uio
> +    insmod  ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
> +    ./usertools/dpdk-devbind.py --bind=igb_uio 04:00.0 04:00.1
> +
> +Test Case: packet match ACL rule
> +================================
> +
> +Ipv4 packet match source ip address 200.10.0.1 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv4.db
> +    @200.10.0.1/32 0.0.0.0/0 0 : 65535 0 : 65535 0/0
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one default rule in rule file /root/rule_ipv6.db
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv4 packet with source ip address 200.10.0.1 will be dropped.
> +    Send one ipv4 packet with source ip address 200.10.0.2 will be
> + forwarded to PORT0
> +
> +Ipv4 packet match destination ip address 100.10.0.1 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv4.db
> +    @0.0.0.0/0 100.10.0.1/32 0 : 65535 0 : 65535 0/0
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one default rule in rule file /root/rule_ipv6.db
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv4 packet with destination ip address 100.10.0.1 will be dropped.
> +    Send one ipv4 packet with destination ip address 100.10.0.2 will be
> + forwarded to PORT0
> +
> +Ipv4 packet match source port 11 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv4.db
> +    @0.0.0.0/0 0.0.0.0/0 11 : 11 0 : 65535 0/0
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one default rule in rule file /root/rule_ipv6.db
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv4 packet with source port 11 will be dropped.
> +    Send one ipv4 packet with source port 1 will be forwarded to PORT0
> +
> +Ipv4 packet match destination port 101 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv4.db
> +    @0.0.0.0/0 0.0.0.0/0 0 : 65535 101 : 101 0/0
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one default rule in rule file /root/rule_ipv6.db
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv4 packet with destination port 101 will be dropped.
> +    Send one ipv4 packet with destination port 1 will be forwarded to
> + PORT0
> +
> +Ipv4 packet match protocal TCP will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv4.db
> +    @0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 6/0xff
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one default rule in rule file /root/rule_ipv6.db
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one TCP ipv4 packet will be dropped.
> +    Send one UDP ipv4 packet will be forwarded to PORT0
> +
> +Ipv4 packet match 5-tuple will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv4.db
> +    @200.10.0.1/32 100.10.0.1/32 11 : 11 101 : 101 0x06/0xff
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one default rule in rule file /root/rule_ipv6.db
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one TCP ipv4 packet with source ip address 200.10.0.1,
> +    destination ip address 100.10.0.1, source port 11, destination
> +    port 101 will be dropped.
> +
> +    Send one TCP ipv4 packet with source ip address 200.10.0.2,
> +    destination ip address 100.10.0.1, source port 11, destination
> +    port 101 will be forwarded to PORT0.
> +
> +Ipv6 packet match source ipv6 address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv6.db
> +    @2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 0:0:0:0:0:0:0:0/0 0 :
> 65535 0 : 65535 0/0
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    Add one default rule in rule file /root/rule_ipv4.db
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped.
> +    Send one ipv6 packet with source ip address
> + 2001:0db8:85a3:08d3:1319:8a2e:0370:7342/128 will be forwarded to PORT0
> +
> +Ipv6 packet match destination ipv6 address
> 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128  will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv6.db
> +    @0:0:0:0:0:0:0:0/0 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 0 :
> 65535 0 : 65535 0/0
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    Add one default rule in rule file /root/rule_ipv4.db
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv6 packet with destination ip address
> 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped.
> +    Send one ipv6 packet with destination ip address
> + 2002:0db8:85a3:08d3:1319:8a2e:0370:7343/128 will be forwarded to PORT0
> +
> +Ipv6 packet match source port 11 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv6.db
> +    @0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 11 : 11 0 : 65535 0/0
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    Add one default rule in rule file /root/rule_ipv4.db
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv6 packet with source port 11 will be dropped.
> +    Send one ipv6 packet with source port 1 will be forwarded to PORT0
> +
> +Ipv6 packet match destination port 101 will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv6.db
> +    @0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 101 : 101 0/0
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    Add one default rule in rule file /root/rule_ipv4.db
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one ipv6 packet with destination port 101 will be dropped.
> +    Send one ipv6 packet with destination port 1 will be forwarded to
> + PORT0
> +
> +Ipv6 packet match protocal TCP will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv6.db
> +    @0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 6/0xff
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    Add one default rule in rule file /root/rule_ipv4.db
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one TCP ipv6 packet will be dropped.
> +    Send one UDP ipv6 packet will be forwarded to PORT0
> +
> +Ipv6 packet match 5-tuple will be dropped::
> +
> +    Add one ACL rule and default route rule in /root/rule_ipv6.db
> +    @2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128
> 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 11 : 11 101 : 101 0x06/0xff
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    Add one default rule in rule file /root/rule_ipv4.db
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one TCP ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128,
> +    destination ip address
> 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128,source port 11,
> +    destination port 101 will be dropped.
> +
> +    Send one TCP ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128,
> +    destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7343/128,
> source port 11,
> +    destination port 101 will be forwarded to PORT0.
> +
> +
> +Test Case: packet match Exact route rule
> +========================================
> +Add two exact rule as below in rule_ipv4.db::
> +
> +	R200.10.0.1/32 100.10.0.1/32 11 : 11 101 : 101 0x06/0xff 0
> +	R200.20.0.1/32 100.20.0.1/32 12 : 12 102 : 102 0x06/0xff 1
> +
> +Add two exact rule as below in rule_ipv6.db::
> +
> +	R2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128
> 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 11 : 11 101 : 101 0x06/0xff 0
> +	R2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128
> +2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 12 : 12 102 : 102 0x06/0xff
> +1
> +
> +Start l3fwd-acl and send packet::
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    Send one TCP ipv4 packet with source ip address 200.10.0.1, destination
> +    ip address 100.10.0.1,source port 11, destination port 101 will be forward to
> PORT0.
> +
> +    Send one TCP ipv4 packet with source ip address 200.20.0.1, destination
> +    ip address 100.20.0.1,source port 12, destination port 102 will be forward to
> PORT1.
> +
> +    Send one TCP ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344,
> +    destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7344, source
> port 11,
> +    destination port 101 will be forward to PORT0.
> +
> +    Send one TCP ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344,
> +    destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7344,source
> port 12,
> +    destination port 102 will be forward to PORT1.
> +
> +Test Case: packet match LPM route rule
> +============================================
> +Add two LPM rule as below in rule_ipv4.db::
> +
> +	R0.0.0.0/0 1.1.1.0/24 0 : 65535 0 : 65535 0x00/0x00 0
> +	R0.0.0.0/0 2.1.1.0/24 0 : 65535 0 : 65535 0x00/0x00 1
> +
> +Add two LPM rule as below in rule_ipv6.db::
> +
> +	R0:0:0:0:0:0:0:0/0 1:1:1:1:1:1:0:0/96 0 : 65535 0 : 65535 0x00/0x00 0
> +	R0:0:0:0:0:0:0:0/0 2:1:1:1:1:1:0:0/96 0 : 65535 0 : 65535 0x00/0x00 1
> +
> +Start l3fwd-acl and send packet::
> +
> +	./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +	--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +	Send one TCP ipv4 packet with destination ip address 1.1.1.1 will be
> forward to PORT0.
> +	Send one TCP ipv4 packet with source ip address 2.1.1.1 will be forward
> to PORT1.
> +
> +	Send one TCP ipv6 packet with destination ip address 1:1:1:1:1:1:0:0 will
> be forward to PORT0.
> +	Send one TCP ipv6 packet with source ip address 2:1:1:1:1:1:0:0 will be
> forward to PORT1.
> +
> +Test Case: packet match by scalar function
> +============================================
> +Packet match 5-tuple will be dropped::
> +
> +    Add one ACL rule and default route rule in rule_ipv4.db
> +    @200.10.0.1/32 100.10.0.1/32 11 : 11 101 : 101 0x06/0xff
> +    R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
> +
> +    Add one ACL rule and default route rule in rule_ipv6.db
> +    @2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128
> 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/101 11 : 11 101 : 101 0x06/0xff
> +    R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00
> + 0
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> + --scalar
> +
> +    Send one TCP ipv4 packet with source ip address 200.10.0.1, destination ip
> address 100.10.0.1,
> +    source port 11, destination port 101 will be dropped.
> +    Send one TCP ipv4 packet with source ip address 200.10.0.2, destination ip
> address 100.10.0.1,
> +    source port 11, destination port 101 will be forwarded to PORT0.
> +
> +    Send one TCP ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128,
> +    destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/101,
> source port 11,
> +    destination port 101 will be dropped.
> +
> +    Send one TCP ipv6 packet with source ip address
> 2001:0db8:85a3:08d3:1319:8a2e:0370:7343,
> +    destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7344, source
> port 11,
> +    destination port 101 will be forwarded to PORT0.
> +
> +Test Case: Invalid ACL rule
> +============================================
> +Add two ACL rule as below in rule_ipv4.db::
> +
> +	R0.0.0.0/0 1.1.1.0/24 12 : 11 : 65535 0x00/0x00 0
> +	R0.0.0.0/0 2.1.1.0/24 0 : 65535 0 : 65535 0x00/0x00 1
> +
> +Add two ACL rule as below in rule_ipv6.db::
> +
> +	R0:0:0:0:0:0:0:0/0 1:1:1:1:1:1:0:0/96 0 : 65535 0 : 65535 0
> +	R0:0:0:0:0:0:0:0/0 2:1:1:1:1:1:0:0/96 0 : 65535 0 : 65535 0x00/0x00 1
> +
> +Start l3fwd-acl::
> +
> +    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --
> config="(0,0,2),(1,0,3)"
> +    --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
> +
> +    The l3fwdacl will not set up because of ivalid ACL rule.
> --
> 2.7.4
Previous message: [dts] [PATCH V2] Add test plan about l3fwdacl
Next message: [dts] [PATCH V4] tests/dual_vlan Change the verify outside the loop
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dts mailing list