[dts] [PATCH v2] test_plans: Modify the operation to up vf port

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Peng Yuan
> Sent: Tuesday, January 15, 2019 3:19 PM
> To: dts at dpdk.org
> Cc: Peng, Yuan <yuan.peng at intel.com>
> Subject: [dts] [PATCH v2] test_plans: Modify the operation to up vf port
> 
> Modify the operation to up vf port of
> ixgbe_vf_get_extra_queue_information_test_plan.rst
> 
> Signed-off-by: Peng Yuan <yuan.peng at intel.com>
> 
> diff --git a/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
> b/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
> index aa94df2..146f04b 100644
> --- a/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
> +++ b/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
> @@ -94,10 +94,9 @@ Test case 1: DPDK PF, kernel VF, enable DCB mode with
> TC=4
>      testpmd> port config 0 dcb vt on 4 pfc off
>      testpmd> port start 0
> 
> -2. check if VF port is linked. if vf port is down, reload the ixgbevf driver::
> +2. check if VF port is linked. if vf port is down, up the port::
> 
> -    rmmod ixgbevf
> -    modprobe ixgbevf
> +    ifconfig eth0 up
> 
>     then you can see VF information in PF side::
> 
> @@ -106,7 +105,7 @@ Test case 1: DPDK PF, kernel VF, enable DCB mode with
> TC=4
> 
>  3. check VF's queue number::
> 
> -    ethtool -S ens3
> +    ethtool -S eth0
> 
>     there is 1 tx queue and 4 rx queues which equals TC number.
> 
> @@ -125,7 +124,7 @@ Test case 1: DPDK PF, kernel VF, enable DCB mode with
> TC=4
> 
>  5. check the packets with different User Priority mapping to TC::
> 
> -    ethtool -S ens3
> +    ethtool -S eth0
> 
>     check the NIC statistics to check the packets increasing of different rx queue.
>     pkt1 to queue 0, pkt2 to queue 1, pkt3 to queue 2, pkt4 to queue 3, @@ -
> 136,9 +135,13 @@ Test case 2: DPDK PF, kernel VF, disable DCB mode
> 
>  1. start the testpmd on PF::
> 
> -    ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --nb-cores=16 --
> rxq=2 --txq=2
> +    ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i
> + --rxq=2 --txq=2 --nb-cores=16
> +
> +2. check if VF port is linked. if vf port is down, up the port::
> +
> +    ifconfig eth0 up
> 
> -2. check if VF port is linked. if vf port is down, reload the ixgbevf driver::
> +   if vf port is still down, reload the ixgbevf driver::
> 
>      rmmod ixgbevf
>      modprobe ixgbevf
> @@ -154,7 +157,7 @@ Test case 2: DPDK PF, kernel VF, disable DCB mode
> 
>  4. check VF's queue number::
> 
> -    ethtool -S ens3
> +    ethtool -S eth0
> 
>     there is 2 tx queues and 2 rx queues as default number.
> 
> @@ -166,7 +169,7 @@ Test case 2: DPDK PF, kernel VF, disable DCB mode  5.
> check the NIC statistics to verify the different packets mapping to
>     different queues according RSS rule::
> 
> -    ethtool -S ens3
> +    ethtool -S eth0
> 
>     send 100 pkt1 to VF, all the packets received by queue 0,
>     then, send 100 pkt2 to VF, all the packets received by queue 1.
> --
> 2.5.0