[dts] [PATCH 2/3] test_plans/pvp_multi_paths_vhost_single_core_performanc: add test plan of PVP multi-paths for vhost max efficiency

Yinan yinan.wang at intel.com
Mon Jan 28 03:34:53 CET 2019


From: Wang Yinan <yinan.wang at intel.com>

Signed-off-by: Wang Yinan <yinan.wang at intel.com>
---
 ...host_single_core_performance_test_plan.rst | 211 ++++++++++++++++++
 1 file changed, 211 insertions(+)
 create mode 100644 test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst

diff --git a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
new file mode 100644
index 0000000..eff73f5
--- /dev/null
+++ b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
@@ -0,0 +1,211 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=====================================
+PVP multi-paths vhost single core Tests
+=====================================
+
+Description
+===========
+
+Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
+Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder 
+no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
+For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io fwd at virtio side to lower the virtio workload.
+
+Test Case 1: vhost single core performance test with Virtio 1.1 mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 2: vhost single core performance test with Virtio 1.1 no-mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 3: vhost single core performance test with Inorder mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=1,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 4: vhost single core performance test with Inorder no-mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=1,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 5: vhost single core performance test with Mergeable path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 6: vhost single core performance test with Normal path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 7: vhost single core performance test with Vector_RX path
+=======================================================================
+
+flow: 
+TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+    rm -rf vhost-net*
+    ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+    --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+    testpmd>set fwd mac
+    testpmd>start
+
+2. Launch virtio-user by below command::
+
+    ./testpmd -l 7-9 -n 4  --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+    --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=0 \
+    -- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
+    >set fwd io
+    >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
-- 
2.17.1



More information about the dts mailing list